• The Journal of Society for e-Business Studies
• /
• v.15 no.4
• /
• pp.101-121
• /
• 2010

This paper presents an intelligent prefetching technique that significantly improves performance of hybrid fash-disk storage, a combination of flash memory and hard disk. Since flash memory embedded in a hybrid device is much faster than hard disk in terms of I/O operations, it can be utilized as a 'cache' space to improve system performance. The basic strategy for prefetching is to utilize sequential pattern mining, with which we can extract the access patterns of objects from historical access sequences. We use two techniques for enhancing the performance of hybrid storage with prefetching. One of them is to modify a FAST algorithm for mapping the flash memory. The other is to extend the unit of prefetching to a block level as well as a file level for effectively utilizing flash memory space. For evaluating the proposed technique, we perform the experiments using the synthetic data and real UCC data, and prove the usability of our technique.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.513-522
• /
• 2013

In the present work, a numerical study of a horizontal falling film evaporator in a multi-effect distillation (MED) plant is performed. Tube bundles in the evaporator are described as porous media, and a volume-averaged method is applied. To calculate the fluid flow and phase change in the evaporator due to heat transfer in the system, FLUENT and user-defined functions (UDF) are used. To observe the performance of the evaporator under different operational conditions, tests are conducted for a steam mass flux ranging from 0.5 to 2.5 $kg/m^2s$ in the horizontal tube, for mass fraction of the noncondensable gas in the tube inlet ranging from 0% to 1%, and for film Reynolds numbers ranging from 100 to 1,000 for the falling film. The evaporation rate increases with the steam mass flux and Reynolds number. In contrast, the evaporation rate decreases by 0.87% with a 1% increase in the mass fraction of the noncondensable gas in the tube.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.58.2-58.2
• /
• 2010

FPD (Flat Panel Display) 제조 공정에서 사용되는 패턴은 수 ${\mu}m$ 수준까지 감소하였으며, FPD의 크기는 급격하게 대형화 되여 현재 8세대(2200mm*2500mm)에 이르고 있다. 이에 따라, $1\;{\mu}m$ 이상의 크기를 갖는 오염입자에 의한 수율 저하를 극복하기 위한 세정효율의 향상 및 다량의 초순수 사용에 따른 폐수 발생으로 인한 환경오염, 또한 장비의 크기에 따른 공간 효용성 감소와 이에 따른 공정 비용의 증가 등의 어려움에 직면하고 있다. 따라서, 현장에서는 고효율, 저비용의 세정 공정 기술 개발에 대한 연구가 활발히 진행되고 있다. 이러한 문제점들을 해결 하고자 이류체 노즐 세정 장치와, 화학액 린스를 위한 초순수 Spray, 건조 공정에 해당하는 Air-knife, Halogen lamp로 구성된 소형화 된 고속 FPD(Flat Panel Display) 세정기에 대한 연구를 진행 하였다. 이류체 노즐은 초순수와 $N_2$ 가스를 내부에서 혼합하여 액적(Droplet)을 형성하여 고압으로 분사시키는 장치로서 화학액을 사용하지 않고 물리적인 방법으로 오염입자를 제거한다. Spray는 유기 오염입자 제거를 위한 오존수의 린스 공정을 위해 설치 하였다. 세정 후 표면에 남아있는 기판의 액막(water film)은 고압의 가스를 분사하는 Air-knife를 통해 제거하였으며, 고속 공정시 발생할 수 있는 Air-knife에서 제거하지 못한 잔류 액막을 Halogen lamp를 사용하여 효과적으로 제거함으로써, 물반점(water mark) 없는 건조 공정을 얻을 수 있었다. 실험에는 미세 입자의 정량적인 측정을 위하여 유리 기판 대신에 6인치 실리콘 웨이퍼(P-type (100))를 사용하였으며, > $\;1{\mu}m$ 실리카 입자를 스핀방식을 사용하여 정량적으로 균일하게 오염하였으며, 오염물의 개수 및 분포는 파티클 스캐너 (Surfscan 6200, KLA-Tancor, USA)를 사용하여 분포 및 개수를 정량적으로 측정 하였다. 이류체 노즐은 $N_2$ 가스의 압력과 초순수의 압력을 변화시켜 측정하여, 각각 0.20 MPa, 0.01 MPa에서 최적의 세정 결과를 얻을 수 있었으며, 건조 효율은 Air-Knife의 입사 각도와 건조면 간격, 할로겐 램프의 온도를 조절 하여 최적의 조건을 얻을 수 있었다.

• Cartoon and Animation Studies
• /
• s.15
• /
• pp.1-12
• /
• 2009

As the technology realizing digital multimedia has been developing remarkably based on Internet environment, today we can gain various information we need quickly and easily without regard to time or place by using world wide web. The recent spread of digital animation as a way of communication on Internet has been forming a new communication paradigm according to the development of age. Besides, digital animations embodied on web are a kind of communication medium which is expressed through interactions using different digital multimedia tools and put the concepts of time and space together. This is a form which can cope with various forms of information, and it occupies a high rate on web and is used often. Web animations offer various forms of communication, such as interface structure design for information transfer, characters, typography, and other graphic elements, which make users feel maximized real dynamics. This paper analyzes and evaluates the categories according to the characteristics, information and usage types of digital animations used on web, examines more efficient communication expressions based on them, and pays attention to the Internet environment that will develop and change in the future. With regard to it, this research aims at suggesting a useful theory so that diverse digital animations on web based on Internet environment would develop into a new communication paradigm responding to the change of time.

• Journal of the Korea Computer Graphics Society
• /
• v.19 no.2
• /
• pp.1-8
• /
• 2013

Captured human motion data has been widely utilized for understanding the mechanism of human motion and synthesizing the animation of virtual characters. Searching for desired motions from given motion data is an important prerequisite of analyzing and editing those selected motions. This paper presents a new method of content-based motion retrieval without the need of additional metadata such as keywords. While existing search methods have focused on skeletal configurations of body pose or planar trajectories of locomotion, our method receives a three-dimensional trajectory as its input query and retrieves a set of motion intervals in which the trajectories of body parts such as hands, foods, and pelvis are similar to the input trajectory. In order to allow the user to intuitively sketch spatial trajectories, we used the Leap Motion controller that can precisely trace finger movements as the input device for our experiments. We have evaluated the effectiveness of our approach by conducting a user study in which the users search for dozens of pre-selected motions from baseketball motion data including a variety of moves such as dribbling and shooting.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.50-57
• /
• 2003

Controlling rotorcraft to fly precisely through multiple, irregularly, and closely spaced waypoints is a common and practical mission. However, finding an optimal trajectory for this kind of mission is quite challenging. Usability of traditional approaches such as inverse control or direct methods to this kind of problem is limited because of either limitation on the specification of the constraints or requirement of extensive computation time. This paper proposes a method that can easily compute the full trajectory and control history for rotorcraft to pass through waypoints while satisfying other general constraints of states such as velocities and attitudes on each waypoint. The proposed method is applied to rotorcraft guidance problems of slalom and linear trajectory in the middle of general curved trajectory. The algorithm is test for various situations and demonstrates its usability.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.2 s.36
• /
• pp.43-53
• /
• 2006

As NGIS project has been implemented in 1995 and effectiveness of geospatial information increased, Digital maps serve several purpose in administrative, living, and the variety of industrial fields. But, Digital maps have difficulties in application of managing urban facilities due to many differences with real world information caused by high update cost and long generation period. This paper suggests an update method of building layers of digital map in urban area; first, we verify the filtered building information using digital areal imagery and LiDAR data which is high-accurate and also can be faster and more economical in 3D information acquisition, and finally update building layers by comparing with the existed digital map. Future research will concentrate on automatic removal of the small and the tree regions, discrimination of buildings and vegetation for generating and updating building layers using LiDAR data.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.35-44
• /
• 2009

This paper describes an application of domain decomposition method for parallel finite element analysis which is required to large scale 3D structural analysis. A parallel finite element method system which adopts a domain decomposition method is developed. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation method is introduced as a basic tool for element generation. Domain decomposition method using automatic mesh generation system holds great benefits for 3D analyses. Aa parallel numerical algorithm for the finite element analyses, domain decomposition method was combined with an iterative solver, i.e. the conjugate gradient(CG) method where a whole analysis domain is fictitiously divided into a number of subdomains without overlapping. Practical performance of the present system are demonstrated through several examples.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.45-55
• /
• 2022

BIM models allow building spaces to be instantiated and recognized as unique objects independently of model elements. These instantiated spaces provide the required semantics that can be leveraged for building code checking, energy analysis, and evacuation route analysis. However, theses spaces or rooms need to be designated manually, which in practice, lead to errors and omissions. Thus, most BIM models today does not guarantee the semantic integrity of space designations, limiting their potential applicability. Recent studies have explored ways to automate space allocation in BIM models using artificial intelligence algorithms, but they are limited in their scope and relatively low classification accuracy. This study explored the use of Graph Convolutional Networks, an algorithm exclusively tailored for graph data structures. The goal was to utilize not only geometry information but also the semantic relational data between spaces and elements in the BIM model. Results of the study confirmed that the accuracy was improved by about 8% compared to algorithms that only used geometric distinctions of the individual spaces.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.281-285
• /
• 2007

본 연구에서는 보다 신뢰성 있고 정확한 정량적 강우예측자료를 생성하기 위하여 레이더강우 및 강우수치예보자료를 합성하는 기법을 제시하였고, 레이더 전처리 및 예측시스템, GIS와 연계한 물리적기반의 분포형모형인 Vflo모형 등 최신 수자원 IT기술을 활용하여 홍수기 돌발홍수에 대응한 초단기 정량적 강우-유출예측을 목적으로 향후 실시간으로 적용 가능한 분포형유출예측시스템의 기반을 구축하고자 하였다. 대상유역은 국지적인 고해상도 지형효과를 고려한 QPM이 개발되어 있는 금강권역의 용담댐유역이며, 예측 강우에 대한 호우사상은 2005년 이후 발생한 3개 강우사상을 대상으로 하였다. 한편, 기상 레이더 자료로부터 산정된 강수량의 수문학적 적용을 위하여 DEM, 토지피복도, 토양도 등의 기본 GIS자료들을 수집 및 구축하였고 물리적기반의 분포형모형(Vflo)의 입력인자로 사용하기 위한 12개의 공간분포형 수문매개변수들을 대표적인 GIS 소프트웨어인 ArcGIS 및 ArcView를 활용하여 추출하였으며, Vflo모형의 현업 적용가능성을 오프라인 상에서 검증해보았다. 모형 검증결과, GIS를 이용한 지형, 토양, 토지피복과 같은 물리적 특성을 사용한 모형의 초기 설정을 향상시킴에 의해 첨두유량, 유출량, 첨두도달시간차 등에서 만족할만한 결과를 보여주었다고 사료된다. 레이더 및 수치예보자료와 합성한 4가지의 형태(QPE, JQPE, QPM, BQPF)의 분포형 입력강우를 이용하여 적용해 본 결과 Nowcasting기법을 이용한 JQPF는 자료의 특성상 초기 1시간30분동안은 비교적 양호한 결과를 얻었으나 3시간 전후로 가면서 예측강우의 질이 저하되기 시작하였으나 QPM을 합성함으로써 생산한 BQPF는 보다 신뢰성있고 양호한 결과를 얻을 수 있었다. 이러한 결과들은 향후 정량적 분포형강우 예측을 이용한 실시간 홍수유출 예측시 댐운영자는 리드타임(홍수선행시간)을 충분히 확보함으로서 안정적이고 예측 가능한 홍수조절을 하는데 도움을 줄 수 있을 것으로 기대된다. 이와 같이 다양한 단기저수지 유입량의 예측정보 제공으로 다목적댐 저수지 운영모형의 효용성을 제고하여 향후 실제 저수지 유입량 예측에 이용함으로써 저수지 단기운영효율 개선에 기여할 수 있을 것으로 사료된다.