• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.19-24
• /
• 2000

Effects of the cross-sectional dimension and moisture profile of wood specimens on the ultrasonic sound velocities of radiata pine heartwood and sapwood. Each moisture profile model specimen was made by composing five wood pieces with various moisture contents. As the cross-sectional dimensions decreased the ultrasonic velocities of both heartwood and sapwood decreased by 4~8%. In the ultrasonic signals transmitted through the specimens low frequency components more dominated than high frequency components as the dimension of cross section increased. The specimens with the same average MCs and different moisture profiles showed different ultrasonic velocities. By plotting the ultrasonic velocities against the average moisture contents of the inner three pieces of the moisture profile model specimens it was revealed that three distinct plot patterns existed.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.75-85
• /
• 2006

Currently, cross-section design can not reflect highway function and traffic volume, various construction. This research paper provides analysis of traffic accident type, improvement of traffic operation and safety, assessment for new cross-section standards of two-lane highway. Research show higher accident rate on 6$\sim$8.9m road than 9$\sim$12.9m road width in two-lane highway. Typical improvement is widening on lane and shoulder width. Simulation show large increase on 6$\sim$7m road delay-time in 1,200vph. In contrast 10$\sim$11.5m road shows slight change on delay-time. This research paper provides various cross-section construction by traffic volume in minor arterial and distributor two-lane highway. The new cross-section design provides adopting highway volume, various construction and flexibility.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.9-16
• /
• 2017

In this paper, we introduce a warning message providing methodology by considering the elderly's walking behavior in V2P(: Vehicle-to-Pedestrian) communication systems. Using the elderly's accident records in Kyounggi-do area from 2011 to 2014, the elderly's accident behaviors are analyzed by categorizing accidents as road type (single road/ crossing road), existence of traffic signal (with signal/ without signal), existence of crosswalk (crosswalk/ jaywalk), cause of accident (jaywalk/ signal violation/ carelessness accident/ Etc.). In addition, the elderly's behavior variable and vehicle speed are applied, then some threshold values are utilized in a warning message providing in conflict area. Finally, we propose a distance which can protect an accident depending on the elderly's walking speed, safety margin and vehicle speed. By applying the results of this research to the V2P/P2V communication based road safety message providing system with the elderly's walking behavior, it may be helpful to reduce accident rate of the elderly.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.57-66
• /
• 2006

This paper presents new pedestrian signal timings considering pedestrian demand Pedestrian characteristics, and land use which were obtained by Pedestrian characteristics field survey and pedestrian signal operation survey. Pedestrian signal timings suggested were compared to the existing pedestrian signal timings by using real field data. pedestrian characteristics field survey was conducted to collect pedestrian crossing speed data and reaction time data. Sixteen areas in Seoul were selected for the data collection. The average pedestrian crossing speed was 1.30m/sec and the 15th Percentile speed was 1.11m/sec. The average reaction time was 2.24 seconds. Pedestrian crossing speed differs by land use, road width. pedestrian age, sex, and number of Pedestrians. Reaction time also differs by road width, pedestrian age, and number of pedestrians. Statistical testing was performed to secure reliability of the collected data.

• Proceedings of the KOR-KST Conference
• /
• 1998.10b
• /
• pp.408-408
• /
• 1998

교통신호기는 다양한 교통통행에 우선권을 부여하는 교통안전시설물로서, 교통소통과 안전에 지대한 영향을 끼치는 매우 중요한 통제시설이다. 그러나 현행 부적절한 신호기 설치로 차량 교통의 흐름을 방해하거나 교통사고를 증가시키는 경우가 있다. 본 연구는 교통안전시설실무편람에 제세된 9가지 신호기 설치준거 중 보행자 신호기 설치 준거에 대하여 국내도로상황 및 보행자 특성에 맞는 새로운 설치준거를 제시하는데 목적이 있다. 교통운영 측면에서 보면, 보행자 신호기는 보행자가 도로를 횡단하는데 적절한 간격을 찾을 수 없을 때 인위적으로 횡단간격을 만들어 주기 위한 교통제어시설이다. 따라서 보행자가 횡단보도에서 최대로 대기할 수 있는 시간을 기준으로 설치 여부를 결정하는 것으로 가정하고, 보행자가 보도상에서 기다릴 수 있는 최대한도 대기시간은 단일로상의 무신호 횡단보도에 교통신회가 설치되었을 경우 한 주기에서 녹색시간을 감한 시간으로 가정할 수 있다. 무신호 횡단보도 현장조사를 통하여 보행자 횡단행태, 횡단보행속도, 보행자 대기시간 등을 분석하였다. 차량의 간섭에 의한 보행자 회단간격과 차량 교통량과의 관계를 도출하고, 보행자 간섭에 의한 차량 교통량과 보행자 교통량과의 관계를 도출하였다. 결론적으로 차로수별로 차량 교통량과 보행자 교통량 상관관계에 의한 신호기 설치, 설치고려, 미설치 영역을 구분하여 보행자 신호기 설치준거(안)을 제시하였다.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.83-89
• /
• 2007

When allocating traffic signal at the signalized intersection, minimum green time and clearance time for bicyclists should be significantly considered in order to enhance safety aspects to bicyclists when crossing intersections, especially where intersections with exclusive bicycle paths that are physically separated from pedestrians. In this study, field measurements related to bicycle crossing time, including minimum peen time and clearance time, were collected and analyzed according to bicycles crossing types at the signalized intersections where high rate of bicyclists exists. Three types of bicycle crossing are defined as follows 1) stopping: completely stop before crossing (at least one foot on found) 2) riding: crossing with riding bicycle 3) pulling: crossing without riding bicycles. Minimum green time based on pedestrian speeds should be used as crossing time in this case. For bicyclists, speed of bicycle that is applicable to estimate the minimum green time is in the 1.36m/sec($15^{th}$ percentile) to 1.60m/sec($25^{th}$ percentile) range in case of its stopping. Also it is in the 0.75($15^{th}$ percentile) to 0.87($25^{th}$ percentile) range for pulling at crosswalk. In addition, speed of bicycle to consider for calculating the clearance time is in the 2.51m/sec($15^{th}$ percentile) to 2.79m/sec($25^{th}$ percentile). These values also resulted from $15^{th}$ percentile or $25^{th}$ percentile speeds of riding. The results of this study are expected to be supported in traffic signal allocation process, reflecting bicyclists' characteristics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.12
• /
• pp.48-58
• /
• 2006

The spray and combustion characteristics of liquid jet in cross flow with variation of injection angle are numerically studied. Numerical analysis was carried out using KIVA code, which may be used to generate numerical solutions to spray and chemical reactive fluid problem in three space dimensions and modified to be suitable for simulating liquid jet ejected into the cross flow. Wave model and Kelvin- Helmholtz(KH) /Rayleigh-Taylor(RT) hybrid model were used for the purpose of analyzing liquid column, ligament, and the breakup of droplet. Penetration length increases as flow velocity decreases and injection velocity increases. Numerical error increases as inflow velocity increases. The results of flame propagation contour in combustion chamber and local temperature distribution, combustion emissions were obtained.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2120-2124
• /
• 2007

본 연구에서는 천해역에서 수평 방향으로 방류되는 비부력 원형 난류제트에 대한 수리모형실험을 수행하여, 파랑이 제트의 확산에 미치는 영향을 검토하였다. 수리모형실험시 대상 파랑은 진폭이 작은 규칙파를 적용하였으며, 난류제트의 순간적인 유속장은 입자화상유속계(particle image velocimetry, PIV)기법을 이용하여 측정하였다. 평균유속장은 PIV기법으로 측정된 순간유속장을 위상평균하여 계산하였으며, 파의 진폭을 변화시키며 실험을 수행하였고, 파의 진폭변화에 따른 제트의 유속분포로부터 제트의 중심선과 제트단면을 추정하였다. 제트의 중심선속도는 파의 진폭이 증가함에 따라 중심선속도의 감소 시점이 빨라졌으며, 제트의 횡단면분포의 고유특성인 자기상사성(self-similarity)이 단계적으로 사라졌다. 제트 중심선의 속도와 제트 유속 단면은 제트의 확산정도를 알 수 있는 중요한 인자로서 파랑 진폭의 크기에 따른 이들 인자의 변화로부터 파랑의 분산이 난류제트의 확산현상에 미치는 영향을 알 수 있었다.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.7-18
• /
• 2001

The pedestrian signal systems operating presently could provide more time for the pedestrian to cross the street than the previous system, but it would increase the cycle length and cause longer delays at the signalized intersections. For instance, more than 80% of traffic signals would have to have the cycle length increased by 10sec in Daegu Metropolitan areas. Therefore. the purpose of this study is to propose a pedestrian traffic signal time that not only maintains the safety of the pedestrian but also reduces the traffic cycle length. The proposed pedestrian signal time is set to enable enough time for the elderly to cross and the flashing time is set low enough to deter the ordinary person. This new pedestrian signal time can reduce the traffic cycle length at intersections and prevent the Pedestrian crossing during flashing time. In addition to the flashing green should be changed to flashing red to warn the pedestrian he should not begin crossing as opposed to the flashing green which suggest he could cross. In this study, the speed of 1.1m/sec and 0.85m/sec are applied to the new proposed signal time for normal and elderly person respectively after analyzing data collected at Daegu Metropolitan area.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.2
• /
• pp.1-8
• /
• 2009

Present studies of these experiments was conducted to using water, over a range of cross-flow velocities from 42 to 136 m/s, with injection frequencies from 35.7 to 166.2 Hz. In cross-flow field, main parameters of liquid jet for secondary breakup were cross-flow drag rather than pressure pulse frequency. As oscillation of the periodic pressure, liquid jet was moved up and down. Also, a bulk of liquid jet puff was detected at upper field of liquid surface. Because of pressure pulsation frequency, an inclination of SMD for the structured layer was evanescent. Cross-sectional characteristics of SMD at downstream area were non-structured distributions. The tendency of volume flux value for various frequency of pressure pulse was same distribution. And volume flux was decreased when the frequency of pressure pulse increasing.