• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.405-405
• /
• 2012

에너지 갭의 크기가 큰 ZnO는 큰 여기자 결합과 높은 화학적 안정도를 가지고 있기 때문에 전자소자 및 광소자로 많이 응용되고 있다. ZnO는 광학적 및 전기적 성질의 여러 가지 장점 때문에 메모리, 나노발전기, 트랜지스터, 태양전지, 광탐지기 및 레이저와 같은 여러 분야에 많이 사용되고 있다. Zn와 쉘 구조가 비슷한 Cu 불순물은 우수한 luminescence activator이고 다양한 불순물 레벨을 만들기 때문에 전기적 및 광학적 특성을 변화하는데 좋은 도핑 물질이다. Cu가 도핑된 ZnO 나노구조를 전기화학적 증착법을 이용하여 형성하고, 형성시간의 변화에 따른 구조적 및 광학적 성질에 대한 관찰하였다. ITO 코팅된 유리 기판에 전기화학증착법을 이용하여 Cu 도핑된 ZnO를 성장하였다. Sputtering, pulsed laser vapor deposition, 화학기상증착, atomic layer epitaxy, 전자빔증발법 등으로 Cu 도핑된 ZnO 나노구조를 형성하지만 본 연구에서는 낮은 온도와 간단한 공정으로, 속도가 빠르고 가격이 낮아 경제적인 면에서 효율적인 전기 화학증착법으로 성장하였다. 반복실험을 통하여 Cu의 도핑 농도는 Zn과 Cu의 비율이 97:3이 되도록, ITO 양극과 Pt 음극의 전위차가 -0.75V로 실험조건을 고정하였고, 성장시간을 각각 5분, 10분, 20분으로 변화하였다. 주사전자현미경 사진에서 Cu 도핑된 ZnO는 성장 시간이 증가함에 따라 나노세선 형태에서 나노로드 형태로 변하였다. X-선 회절 측정결과에서 성장시간이 변화함에 따라 피크 위치의 변화를 관찰하였다. 광루미네센스 측정 결과는 Oxygen 공핍의 증가로 보이는 500~600 nm 대의 파장에서 나타난 피크의 위치가 에너지가 큰 쪽으로 증가하였다. 위 결과로부터 성장 시간에 따른 Cu 도핑된 ZnO의 구조적 및 광학적 특성변화를 관찰하였고, 이 연구 결과는 Cu 도핑된 ZnO 나노구조 기반 전자소자 및 광소자에 응용 가능성을 보여주고 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.33-40
• /
• 2003

Radio frequency management system(RFMS) is being operated to facilitate national spectrum management and monitoring in Korea. To improve the engineering analysis function in RFMS, criteria for the automated selection of the propagation model adequate to the radio station service environment considered are proposed. Those criteria are derived from the specified parameters obtained through the analysis of related ITU-R propagation & diffraction loss models which are to be used in RFMS. Then, using criteria acquired, computer program is made to achieve the automated selection of the most appropriate propagation algorithm, among the ones provided in RFMS, to the environment in which the engineering analysis is required. Furthermore, an illustrative example is shown with the proposals fur increasing the efficiency of the engineering analysis in RFMS.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.339-342
• /
• 2007

$Cu(In_{1-x}Ga_{x})Se_2$(CIGS)는 매우 큰 광흡수계수를 가지고 있으므로 박막형 태양전지의 광흡수층 재료로서 많은 연구가 진행되고 있다. 박막이 태양전지의 광흡수층으로 이용되기 위해서는 큰 결정크기와 평탄한 표면, 적당한 전기적 특성을 가져야 한다. 이러한 특성들은 CIGS 박막의 조성에 큰 영향을 받고 있는 것으로 보고되고 있다. 본 연구에서는 동시증발법을 이용하여 Cu/(In+Ga) 비를 0.9로 고정한 후 Ga 조성(Ga/(In+Ga)의 비 : 0.32, 0.49, 0.69, 0.8, 1)을 변화시켜 Wide band gap CIGS 박막태양전지를 만들었다. 기판은 soda line glass를 사용하였고 뒷면 전극으로는 Mo를 스퍼터링법으로 증착하였다. 또한 버퍼층으로는 기존에 쓰이고 있는 CdS를 CBD(Chemical Bath Deposition)법으로 층착시켰으며, 윈도우층으로는 i-ZnO/n-ZnO를 스파터링 법으로 층착하였다. 그리고 앞면전극으로는 Al을 E-beam 으로 증착하였다. 분석은 XRD, SEM, QE로 분석하였다. 위 실험에서 얻은 결과로는 Ga/(In+Ga)비가 증가할수록 Cu(In,Ga)Se2 박막은 회절 peak들이 큰 회절각으로 이동하였고, 이것은 Ga 원자와 In 원자의 원자반경의 차이에서 기인된 것으로 사료된다. 또한 Ga 조성이 증가할수록 단파장 쪽으로 이동하는 것을 볼 수 있으며, Voc가 증가하다가 에너지 밴드캡이 1.62 eV 이상에서는 Voc가 감소하는 것을 볼 수 있는데 이것은 Ga 조성이 증가할수록 에너지 밴드캡이 커지면서 defect level 이 존재하기 때문인 것으로 사료된다. Ga/(In+Ga)비가 1일 때의 변환효율은 8.5 %이고， Voc : 0.74 (V), Jsc : 17.2 ($mA/cm^{2}$), F.F : 66.6(%) 이다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.1
• /
• pp.84-96
• /
• 2006

This paper presents a simplified numerical method that can be used to incorporate the partial reflection and transmission of water waves in the hyperbolic mild-slope equation. For given reflection and transmission coefficients, wave fields around a porous breakwater including reflection, transmission, and diffraction can be simulated accurately. For the verification of the proposed method, numerical experiments have been carried out and compared with analytic solutions given by Yu(1995) and McIver(1999). The proposed method is easy to implement and is computationally efficient. It is demonstrated that the method performs well with a sloping bottom bathymetry and varying incident wave angles.

• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.77-85
• /
• 1992

The design of a flat-field XUV spectrograph is optimized for a high throughput, aberration-corrected spectral image in the wavelength region of 50-300 $\AA$ The varied-line spacing (VLS) concave grating theory for an XUV spectrograph with a toroidal mirror in front of an entrance slit is derived. Since the derived theory includes the arbitrary shaped source, it is able to correct the limit of the simple optimization theory which considers only a point source at the center of the entrance slit. The reflection matrix at the toroidal mirror and the diffraction matrix at VLS grating are derived and compared with those of a holographic grating. The absolute energy efficiency of a flat-field spectrograph is calculated by considering the reflectivities of the toroidal mirror and the Au coated concave grating and the grating efficiency. The alignment sensitivity of the toroidal mirror and the concave grating is investigated, and the method to achieve the best imaging of XUV spectrum is discussed. The calculated resolving power of the flat-field XUV spectrograph is more than 4000 in the aberration-corrected wavelength range. The focused spot size at the dispersion plane is less than $20\mu \textrm m\times \mu \textrm m$at the wavelength 100$\AA$ It is shown that a high throughput characteristic can also be achieved through a careful adjustment of alignment parameters.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.143-148
• /
• 2021

A systematic study of Bloch surface wave (BSW), which is created by guided mode resonance (GMR) of dielectric multilayer structures with a grating profile, is presented to analyze the sensing performance of bio-sensors. The effect of structural parameters on optical behavior is evaluated by using Babinet's principle and modal transmission-line theory. The sensitivity of designed bio-sensors is proportional to the grating constant at wavelength spectrum, and inversely proportional to the normal wave vector of incident electromagnetic wave at angular spectrum. Numerical results for two devices with SiO/SiO₂ and TiO₂/SiO₂ multilayer dielectric stacks are presented, showing that BSW can be exploited for the realization of efficient diffraction-based bio-sensors from infrared to visible-band range.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.62-69
• /
• 1998

We demonstrated the character display unit using a binary phase hologram array and a liquid crystal-spatial light modulator (LC-SLM). It combines the dynamic property of the LC-SLM with the high-efficiency property of the phase hologram fabricated by photolithography. Experimental results of the proposed unit are presented. The character display unit proposed in this paper has a fundamental and important meaning as new method displaying images by using light, and it will be used in optical information processing and optical communications fields.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1353-1361
• /
• 1992

Holographic optical element(HOE) is fabricated with the properties of lightweight, thin thickness and interconnectivity for free space. Particularly, HOE for optical interconnection and multiple image processing should have a high efficiency and equal spot intensity, Nonlinear equations for 2-dimensional binary phase grating(BPG) structure is solved by computer simulation based on modified Newton method. Computer-generated pattern drawn by plotter is scaled down and translated into the microfilm. After contact printing between the microfilm and silver halide hologram film, phase diffraction grating produces the $5{\times}5$ multiple spots. Experimental results are shown that bleached phase grating has a high efficiency and equal focused beams except central zero order.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.341-347
• /
• 1996

We fabricated the effective $Cu_2S$/CdS solar cells with large area by a spray pyrolysis method. In preparation process, we investigated the process parameters which directly influenced the efficiency of solar cell, such as the grid contact for electrodes, the temperature condition of CdS spray and the junction characteristics of $Cu_2S$ layer, by scanning electron microscope(SEM), x-ray diffraction(XRD) and temperature dependent optical absorption and photoconductivity. The $Cu_2S$/CdS solar cell with area of 1$\textrm{cm}^2$ showed the efficient of 3.15% under air mass 2(AM2) spectrum irradiation with 75mW/$\textrm{cm}^2$.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.73-77
• /
• 2002

Applying the computer interface cards installed to old-fashioned, used PENTIUM I for the basic optical experiment makes students to have more attention and interests in the experiment, and enhanced the accuracy of the optical experiment. When applied for the light diffraction experiment, the above way of results made the experiment more accurate comparing with those of other experiments operated in advance. In addition, they turned out to be as same as the data in theory. Applying the above way not only for the basic optical experiments to recycle old-fashioned PCs being abandoned but also for the automation of optical experiments in manual could enhance the efficiency of the experiment a lot.