• Title/Summary/Keyword: 회전자 구속시험

Search Result 7, Processing Time 0.028 seconds

Compensation Algorithm Rotor Parameter Variation for I.M Using Fuzzy Logic Controller (퍼지논리제어기를 이용한 유도전동기 회전자 상수변동 보상제어기법)

  • 류경윤;이홍희
    • Proceedings of the KIPE Conference
    • /
    • 1999.07a
    • /
    • pp.531-534
    • /
    • 1999
  • 벡터제어기법은 유도전동기의 무부하 시험 및 구속시험 등을 통하여 구한 고정자 및 회전자 상수를 이용한 전동기의 수학적 모델을 기초로 하여 이루어진다. 따라서 유도전동기의 수학적 모델을 구성하는 고정자 및 회전자 상수의 정확성은 곧 벡터제어의 성능과도 직결된다. 하지만, 온도 상승 등의 영향으로 회전자 저항값은 정상치보다 최대 80∼100%까지 상승 할 수 있으며, 이는 벡터제어의 특성을 저하시키는 요인이 된다. 따라서, 본 연구에서는 회전자 저항을 이용하는 자속 PI제어부를 회전자 저항을 사용하지 않는 자속 퍼지제어부로 대체하고 측정한 3상 전류를 이용하여 회전자 저항값의 변화를 실시간으로 추정·보상하는 퍼지추론기를 구성하므로써 회전자 저항의 변화에도 최적의 효율 및 성능을 가지는 보완된 벡터 제어 기법을 개발하였다.

  • PDF

A Study on the Outside Rotor Type Induction Motor (외측회전형 유도전동기에 관한 연구)

  • 김현수;배철오;김종수
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.7 no.4
    • /
    • pp.812-818
    • /
    • 2003
  • This paper presents a developed outside rotor type induction motor for the fan. Nearly all of the induction motors consist of two parts, rotor and stator, and the position of rotor is generally inside of stator. However, the rotor of the developed induction motor is located outside of stator. It is believed that the outside rotor type induction motor is suitable for the fan due to its large inertia, that is, it is considered that the change of air flow rate resulting from input power or load fluctuation is reduced. In this paper, the two tests which are suitable to obtain the electrical parameters of the outside rotor type induction motor were described, then various parameters of outside rotor type induction motor were measured. These are the locked rotor test and no load test. By using these tests, it was possible to determine the parameters which are presented in the steady-state equivalent-circuit of the outside rotor type induction motor. Load test of induction motor was carried out using a dynamometer and the torque-speed curve was obtained. It is believed that the results of this paper can be used for the development of the outside rotor type induction motor.

An Improvement Characteristics for Squirrel cage Induction Motor of 5-Phase 1.5KW (5상 1.5[KW] 농형 유도전동기의 특성개선)

  • Jung, Hyung-Woo;Kim, Min-Huei;Kim, Nam-Hun;Kim, Dong-Hee;Song, Hyun-Jig
    • Proceedings of the KIPE Conference
    • /
    • 2012.11a
    • /
    • pp.219-220
    • /
    • 2012
  • 본 연구는 3상 보다 많은 장점을 가지는 다상 교류전동기를 연구하기 위하여 개발된 5상 1.5Kw 220V, 60Hz 농형 유도전동기의 특성 개선에 대한 연구결과이다. 연구용으로 개발된 5상 전동기는 정격운전에서 전압변동률, 속도변동률, 역율, 효율 및 운전특성 등이 많이 저하 되어 이에 대한 문제점의 개선를 요구하고 있었다. 이에 따라 기존에 개발된 고정자와 회전자의 철심 코아의 구조는 변화 하지 않고 그대로 고정된 상태를 유지하면서, 고정자 권선의 재설계와 제작을 되풀이하는 시행오차 법에 의해 최적의 전동기를 설계 제작하여 정밀 시험을 통하여 운전특성이 개선된 연구결과를 보여준다. 제시되는 특성실험 결과는 무부하시험, 구속시험, 부하특성실험, FFT 고조파 분석, 전동기의 정수 결정 및 등가회로이다.

  • PDF

A Study on the outside rotor type double squirrel cage Induction motor (외측회전형 이중 농형 유도전동기에 관한 연구)

  • 김현수;배철오;안병원
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.27 no.6
    • /
    • pp.776-782
    • /
    • 2003
  • This paper describes a newly developed double squirrel cage induction motor in which the rotor is located outside the stator. The outside rotor type brushless dc motor has been used for VTR's head drum and PC's cooling fan, but this kind of induction motor has not been developed yet. The parameters of outside rotor type induction motor were measured from the locked rotor test and no load test. It is possible to determine the parameters which are presented in the steady-state equivalent-circuit of the outside rotor type induction motor. Load test of induction motor was carried out using a dynamometer. For the characteristics of torque, efficiency, power factor and output. the developed double squirrel cage induction motor is compared with the ordinary induction motor It is believed that the results of this paper can be used for the development of the outside rotor type induction motor.

Numerical Simulation of Triaxial Compression Test Using the GREAT Cell: Preliminary Study (GREAT 셀을 이용한 삼축압축시험의 수치모사: 예비연구)

  • Park, Dohyun;Park, Chan-Hee
    • Tunnel and Underground Space
    • /
    • v.32 no.3
    • /
    • pp.219-230
    • /
    • 2022
  • The Geo-Reservoir Experimental Analogue Technology (GREAT) cell was designed to recreate the thermal-hydro-mechanical conditions of deep subsurface in the laboratory. This apparatus can generate a polyaxial stress field using lateral loading elements, which rotate around the longitudinal axis of a sample and is capable of performing a fluid flow test for samples containing fractures. In the present study, numerical simulations were carried out for triaxial compression tests using the GREAT cell and the mechanical behavior of samples under different conditions of lateral loading was investigated. We simulated an actual case, in which triaxial compression tests were conducted for a polymer sample without fractures, and compared the results between the numerical analysis and experiment. The surface strain (circumferential strain) of the sample was analyzed for equal and non-equal horizontal confining pressures. The results of the comparison showed a good consistency. Additionally, for synthetic cases with a fracture, we investigated the effect of the friction and type of fracture surface on the deformation behavior.

The Study of Determination to Equivalent Circuit Parameters for Single phase Induction Motor using MATLAB (매트랩을 이용한 단상유도전동기 등가회로 정수 산출에 관한 연구)

  • Lee, Byung-Sun;Kim, Yang-Ho
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.21 no.1
    • /
    • pp.125-130
    • /
    • 2007
  • Single-phase is used widely power of field of appliance because can use commercialized power directly without power transform. Specially, because condenser nu-drive style single-phase induction motor efficiency is excellent, and most suitable in embodiment as economical. It is established true that method by crossing self-discipline and method by revolving magnetic field are interpretation of net single-phase induction motor, but method to calculate electric motor inside proper move in existent theory or method is some complex. That arbor in the law of circuit constant that combine equivalent circuit law with numerical analysis law according to development of the latest computer or microprocessor is suggested and does the calculation processing fast and correct. In this paper, measurement wishes to present method that calculate after calculate digital measurement that measures correctly and measures impossible the first and the second leakage reactance and no-load test locked-rotor test, DC test and resistance measurement of stator winding in circuit parameter calculation program that is had for MatLab program individually in single-phase power.

Development and Experimental Performance Evaluation of Steel Composite Girder by Turn Over Process (단면회전방법을 적용한 강합성 소수주거더 개발 및 실험적 성능 평가)

  • Kim, Sung Jae;Yi, Na Hyun;Kim, Sung Bae;Kim, Jang-Ho Jay
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.30 no.5A
    • /
    • pp.407-415
    • /
    • 2010
  • In Korea, more than 90% of the total number of steel bridges built for 40~70 m span length is a steel box-girder bridge type. A steel box-girder bridge is suitable for long span or curved bridges with outstanding flexural and torsional rigidity as well as good constructability and safety. However, a steel box-girder bridge is uneconomical, requiring many secondary members and workmanship such as stiffeners and ribs requiring welding attachments to flanges or webs. Therefore, in US and Japan, a plate girder bridge, which is relatively cheap and easy to construct is generally used. One type of the plate girder bridge is the two- or three-main girder plate bridge, which is a composite plate girder bridge that minimizes the number of required main girders by increasing the distance between the adjacent girders. Also, for the simplification of girder section, the stiffener which requires attachment to the web is not required. The two-main steel girder plate bridge is a representative type of plate girder bridges, which is suitable for bridges with 10 m effective width and has been developed in the early 1960s in France. To ensure greater safety of two- or three-main girder plate bridges, a larger steel section is used in the bridge domestically than in Europe or Japan. Also, the total number of two- or three-main girder plate bridge constructed in Korea is significantly less than the steel box girder bridge due to a lack of designers' familiarity with more complex design detailing of the bridge compare to that of a steel box girder bridge design. In this study, a new construction method called Turn Over method is proposed to minimize the steel section size used in a two- or three-main girder plate bridge by applying prestressing force to the member using confining concrete section's weight to reduce construction cost. Also, a full scale 20 m Turn Over girder specimen and a Turn Over girder bridge specimen were tested to evaluate constructability and structural safety of the members constructed using Turn Over process.