• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.218-231
• /
• 2008

The purpose of this study was made for the pre-teacher of university to enhance understanding for the concept of engine performance and to provide information regarding engine performance in the institute of teacher educator. This study was carried out through engine performance experiment with The Cussons Engine Test Bed P8250, internal combustion engine, in order to analyze data quantitatively, and apply and verify factors of controlling engine performance. The main results of this study are as follows: First, power and brake horsepower increased linearly, and torque over the mid-speed as engine rps(revolution per second) decreased. Second, the change of torque and specific fuel consumption were able to be verified and the concept of engine performance was able to be understood. Third, the experimental values of brake horsepower and torque on engine performance showed the same tendency as theoretical values. Fourth, air/fuel ratio increased proportionally as engine speed increased.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1279-1289
• /
• 2013

In recent times, turbomolecular pumps (TMPs) have been used frequently to generate and maintain high and clean vacuum. Because of the high-speed rotation of the rotor, its structural safety should be treated as the first design concern. This paper presents the structural analysis and optimization of rotor blades of a TMP. To increase the numerical efficiency in the finite element modeling and analysis, the P-method provided in Pro/ENGINEER was used for simulation. The structural responses for several types of rotor blades were investigated, and the effects of the blade angle, blade length, and round size are thoroughly studied for each type of TMP blade. In addition, structural optimization to reduce and even the maximum stress at each stage of the TMP by changing the size of rounds between the blade and the hub was performed very successfully by using the P-method.

• Journal of KIISE
• /
• v.42 no.10
• /
• pp.1185-1194
• /
• 2015

A spherical panoramic image does not conform to the pin-hole camera model, and, hence, it is not possible to utilize previous techniques consisting of plane-to-plane transformation. In this paper, we propose a new method to estimate the planar geometric transformation between the planar image and a spherical panoramic image. Our proposed method estimates the transformation parameters for latitude, longitude, rotation and scaling factors when the matching pairs between a spherical panoramic image and a planar image are given. A planar image is projected into a spherical panoramic image through two steps of nonlinear coordinate transformations, which makes it difficult to compute the geometric transformation. The advantage of using our method is that we can uncover each of the implicit factors as well as the overall transformation. The experiment results show that our proposed method can achieve estimation errors of around 1% and is not affected by deformation factors, such as the latitude and rotation.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.3 s.46
• /
• pp.259-268
• /
• 2000

In the friction-type joints the external applied load is transmitted by frictional force acting on the contact area of the plates fastened by the high strength bolts. This frictional force is proportional to the product of the bolt clamping force and slip coefficient of the faying surface. But the bolt clamping force is dependent on many factors when the turn-of-nut method is used. The preserved thread length and length-to-diameter ratios are one of the major factors governing the bolt clamping force. This paper presents the correct method of high strength bolt tightening through the experiment on the mechanical properties on sets of high strength bolts in accordance with preserved thread length and length-to-diameter ratios.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.4
• /
• pp.3572-3584
• /
• 1974

본 논문은 Thrower의 양곡성능에 관한 예측 방정식을 차원해석법을 적용하여 유도하는데 있다. Thrower의 능률에 큰 영향을 미친다고 생각되는 인자들간의 관계식들을 Buckingham의 $\pi$이론에 의하여 구하여 졌으며 본연구에 사용한 Thrower는 현재 농촌에서 사용되고 있는 자동탈곡기의 Thrower와 유사한 형으로 제작된 것이며 실험에 사용된 시료는 벼의 경우는 통일벼와 미네히까리 품종이고 보리 품종으로서는 나맥이며, Thrower의 Impeller 직경, 속도 및 투입량을 변화시켜 가면서 각 시료에 대하여 양곡높이를 측정하여 그 예측방정식을 유도하였다. 본 논문에서 얻은 결과는 다음과 같다. 1. Thrower의 양곡성능에 지대한 영향을 미친다고 생각되는 주요 인자들을 Thrower의 양정, impeller의 직경과 속도, 투입량, 곡립의 밀도, 중력가속도등이라 간주하여 Buckingham의 $\pi$이론을 적용하여 이들에 관한 $\pi$항들을 결정하였으며 그 결과는 다음과 같다. {{{{ pi 1= { D} over {H } , pi 2= { { DN}^{ { 1} over {2 } } } over { { g}^{ { 1} over { 2} } }, pi 3= { Q} over { { g}^{ { 1} over {2 } } { rho D}^{ { 2} over {6 } } }}}}} 2. 실험에 의하여 구해진 $\pi$항문의 관계식을 합성하여 Thrower의 양곡성능에 관한 시료별 예측방정식을 구하였으며 이 식들은 아래와 같다. 통일 : $\pi$1=0.1223($\pi$2)-1.1813$\times$($\pi$3)-0.1864 미네히까리 : $\pi$1=0.1185($\pi$2)-0.9663$\times$($\pi$3)-0.1575 나맥 : $\pi$1=0.1599($\pi$2)-1.2350$\times$($\pi$3)-0.1382 3. 현재 농촌에서 사용되고 있는 자동탈곡기체 부착된 Thrower의 회전수, Impeller의 직경 및 투입량은 각각 1,100rpm, 30cm 및 150gr/sec 정도로서 이와같은 수준의 변량들을 기초로 하여 본 논문에서 유도한 예측방정식을 적용하여 Thrower의 양정을 산출한 결과, 통일벼의 경우는 2.6m정도였고 미네히까리 품종과 나맥의 양정은 각각 2.4m, 2.9m 정도였다. 이와같은 사실로부터 1m내외의 양정만으로 되어있는 자동탈곡기 Thrower의 경우 제작비절감, 소요동력 감소를 기하고 아울러 과립의 손상을 줄이기 위해서는 설계 또는 작동조건의 변경을 통해 Thrower의 회전수를 현재 수준이하로 줄일 필요가 있다고 판단되었다.

• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.13-19
• /
• 2011

Purpose: Not much is known about the obvious relationship between posteroinferior rotator cuff tear and biceps lesion. The purpose of this study is to analyze the effect of posteroinferior rotator cuff tear on a biceps lesions by comparing the rotator cuff tear and biceps lesions with the number of cuff tears and the degree of degeneration of the rotator cuff. Materials and Methods: 65 patients who underwent surgery for a posteroinferior rotator cuff tear from 2002 to 2009 were included as subjects. The study determined the factors (the number of cuff tears and the degree of degeneration as assessed by MRI) that affected biceps lesions and the kinematic stability of the rotator cuff. Results: Biceps lesion was noted 11 patients among the 51 patients with supraspinatus tendon tears and in 8 patients among the 14 patients with supraspinatus, infraspinatus or teres minor tendon tears, and there was a statistically significant difference between those two groups (p=0.0095). The number of cuff tears was proportional to biceps lesion with statistical significance (p=0.0095). Among the biceps lesions, SLAP II lesion showed a statistically different distribution according to the number of cuff tears (p=0.0073). The degeneration factors (Goutallier's classification and the tangent sign) had no correlations with biceps lesion. Conclusion: Posterosuperior cuff tear may affect biceps lesion. Especially, the number of cuff tears has a close relationship, but the degenerative indicators have no relationship with biceps lesion.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.86-86
• /
• 2017

마늘파종기는 파종기구동부와 파종후 파종홀의 복토역할을 하는 파종기롤러, 지면과의 마찰을 통해 바퀴의 회전토크가 발생하며 발생된 토크는 파종기 내부 동력으로 전달되어 전체 파종시스템(배종, 호퍼캠, 파종부)을 동작 시키는 기능을 수행하는 파종바퀴, 마늘종구를 한알씩 집어올려 중간이송컵으로 이송하는 자세교정컵이 포함된 배종부와 자세교정컵에서 낙하된 마늘종구를 땅속으로 파종하는 파종장치로 구성된다. 배종율 95%, 2립 배종률 5% 성능을 확보할 수 있는 기술이 개발될 경우 세계적으로도 독보적인 기술 우위를 확보할 수 있다. 이와 같은 기본적인 기능을 구현할 수 있는 컨셉모델에 대한 설계를 수행하여 시제품개발 전 기구해석과 구조해석 등을 위한 기본설계를 수행하였다. 배종율 95% 이상을 확보하기 위해서는 기존의 현장경험의 의한 설계 방식으로는 한계가 있기 때문에 시뮬레이션 및 분석 개발이 필요한데, 프레임은 고정밀 마늘종구 배종부 장착을 위한 기본 구조물로써 작동시 동력을 얻기 위한 바퀴와 연계가 되도록 설계되었으며, 호퍼는 배종 수행을 위해 마늘을 저장해 두는 통으로써 배종부와 연결된다. 배종부의 배종판이 회전함에 따라서 배종판의 홈이 호퍼 내로 들어갔다 나오면서 마늘을 집게되며, 동력 전달부는 배종판을 회전시켜주고, 회전 속도 조절을 가능하게 한다. 파종부는 배종부에서 중간컵을 통해 하나씩 공급해준 마늘을 땅에 심는 부분으로서. 프레임의 바퀴 회전과 연동되어 회전하고 설계하였다. 배종판에서 중간컵으로 이송된 마늘을 파종부의 파종컵에 받아 회전하면서 땅속에 파종컵이 묻히면 파종컵이 열리면서 땅속에 마늘을 심는 원리이다. 조간조정은 7조식의 경우 초기설치시 고정되도록 설계되었으며 농촌진흥청 기계화 표준재배안에 따라 의성마늘 기준 $14{\times}14cm$(조간${\times}$주간)를 기준으로 개발하였다. 조간조정은 기계가 설치되면 조정하기 어려우므로 14cm로 설계하였으며, 주간조정은 원형배종장치의 구동기어부의 속도비로 간격을 조정할 수 있도록 기어장치를 설계하였다. 주간조정은 13에서 18cm의 범위에서 작동하도록 설계되었으며, 필요에 따라 간격조절이 가능함. 마늘은 그 크기가 다르고, 형상도 다르기 때문에 종자에 따른 개별적인 파종기술들이 개발되어야하기 때문에 개발 기간이 오래 걸리고, 수익에 비하여 개발비가 과다하게 요구되는 실정인데 축적된 시뮬레이션 툴을 이용한 파종기 분석 기술을 확보할 경우 다른 파종기의 연구 개발에도 크게 도움이 될 것으로 기대되며, 생육측정 실험과 동역학 해석 툴 RecurDyn을 통해 파종기의 기구학적 분석을 통한 설계반영 인자를 도출할 계획이다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.5
• /
• pp.477-486
• /
• 2010

This study was performed with the object in which it improves the nitrification by using RBC, that is one of the biological waste water treatment process. By applying the Modified Dephanox process to RBC in this research in order to evaluate the improvement of the nitrification by RBC a research was conducted. There is the most conspicuous feature of the process of using RBC. it is that the nitrification can be smoothly performed even if the suspended solid of the high concentration as the interference factor in the nitrification tank is flowed in. Moreover, as a result of experiment, TCOD removal efficiency of the process showed up more than about 90%. when influent TCOD loading rate was 0.04~0.1 kg / $day{\cdot}m^3$. and T-N removal efficiency is high at about 75% in spite of the process operating of the laboratory scale was observed. Also, As increasing influent ${PO_4}^{3-}$-P, T-P loading rate, ${PO_4}^{3-}$-P, T-P removal efficiency was increased. Finally, it was elucidated that the utilization of RBC in external nitrification system resulted in not only high nitrification performance but also stable system operation by minimizing inhibitory effect of overflowed suspended solid (SS).

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.235-241
• /
• 2008

If the target volume cannot be included with one field at head and neck cancer, we commonly used two or more field. It is very important to irradiate uniform dose at junction area of the fields. However, according to body shape of patient or general condition of patient, skin junction area can be matched incorrect, So overdose area or underdose area can be appeared in the junction area. This study researched therapy technique which can give uniform dose at skin junction owing to applying the edge block of lateral field at head and neck cancer. We measured the changed distance and rotational angle between central line of anterior supraclavicle lymph node and low margin of right lateral field on simulation process using the shielding block of variable rotation. As a result, the changed distance between central line of anterior supraclavicle lymph node and low margin of right lateral field was below 2mm to ${\pm}$10cm distance at central line of Y axis, changed angle was average 1.28 degree. But by using it the shielding block of variable rotation, the incorrect match at junction can be minimized. We think that this technique is very efficient one to apply this technique at head and neck cancered by the movement of organs can be not included, Therefore we have to pay attention on the process to imput MLC layer

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.2
• /
• pp.180-185
• /
• 1999

Rotating Biological Contactor (RBC) was tested for the treatment of artificial rearing water in n simulated aquaculture system. Performance of RBC on the removal of TAN and COD was evaluated by controlling hydraulic residence time (HRT). As HRT of RBC was increased, TAN removal rate ana removal efficiency of RBC and TAN concentration of rearing water were increased, but COD removal rate was decreased. Total alkalinity consumption rate was increased by increasing HRT of RBC. Ratio between total alkalinity consumption rate and TAN removal rate was 7.73. HRT for maintaining lowest TAN and COD concentration of artificial rearing water was 14,6 minutes and at that condition TAN and COD concentration of the water was 1.28 and $5.59 g/m^3$, respectively.