• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.273-278
• /
• 2010

지난 2009년부터 30층 이상 건축물에 대해 성능위주 설계가 의무화되면서 초고층 건축물의 피난설계에 대한 관심이 고조되고 있다. 수직적인 계단실 내부에서 반복적으로 회전하며 이동하는 초고층 건축물의 피난행태는 일반적인 건축물과는 큰 차이가 있으므로 그 동안 상대적으로 활발히 진행되어온 일반적 중 저층 건축물의 피난기준을 초고층 건축물에 적용시키기에는 어느 정도 무리가 있다고 판단된다. 이에 본 연구에서는 초고층 건축물의 피난계단실의 합리적인 설계를 위한 선행연구로 건축물에서 피난시간을 결정하는 주요 요소들을 선별하여 각 결정인자의 변화정도에 따라 피난시간이 어떻게 변하는지 민감도 분석을 실시하였다. 실험 시나리오의 작성을 위해 BuildingEXODUS를 사용하였고, PASW 18을 사용하여 결과값에 대한 민감도 분석을 수행하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.104-110
• /
• 2018

Operating mode analysis of a liquid propellant rocket engine(LRE) is a crucial tool through the development of an engine. The operating mode analysis of an engine based on a collection of the acceptance tests of components shows discrepancies when compared to the test results. We propose a correction method for performance parameters to develop an engine analysis model for the gas generator cycle of an LRE. In order to simulate engine behavior, the performance parameters for the analysis model are tuned based on the test results of the 75tf engine of KSLV-II.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2019

The optimal design parameters of a dynamic absorber (DA) in a machine body (that is considered as a rigid body) are discussed in this paper. The bounce and rotation motions of the rigid body have been controlled passively by a DA, which consists of a mass and a spring. The rigid body is subjected to a harmonically excited force and supported by linear springs at both ends. To define the motion of a rigid body with a DA, the equation of motion was expressed in the third-order matrix form. To define the optimal design conditions of a DA, the reduction of dynamic characteristics, represented by the amplitudes of bounce and rotation, and the transmitted powers, were evaluated and discussed. The level of reduction was found to be highly dependent on the location and spring stiffness of the DA.

• Journal of radiological science and technology
• /
• v.36 no.3
• /
• pp.237-244
• /
• 2013

The purpose of this study is to compare method in the treatment of breast cancer using dose index. And, it is to find the optimized treatment technique to the patient. The phantom filled with tissue-equivalent material were used simulation and treatment as techniques of 3D-CRT, IMRT, VMAT was planned using Eclipse v10. By using HI(homogeneity index), CI(Conformity index), OED(Organ equivalent dose), EAR(Excess Absolute Risk), were assessed for each treatment plans. HI and CI of 3D-CRT, IMRT, VMAT were calculated 16.89, 11.21, 9.55 and 0.59, 0.61, 0.83. The organ average doses of Lt lung, Rt lung, liver, heart, esophagus, cord, Lt breast, trachea and stomach were 0.01 ~ 2.02 Gy, 0.36 ~ 5.01 Gy, 0.25 ~ 2.49 Gy, 0.14 ~ 6.92 Gy, 0.03 ~ 2.02 Gy, 0.01 ~ 1.06 Gy, 0.25 ~ 6.08 Gy, 0.08 ~ 0.59 Gy, 0.01 ~ 1.34 Gy, respectively. The OED, EAR of the IMRT and VMAT show higher than 3D-CRT. As the result of this study, we could confirm being higher dose index(HI, CI) in IMRT and VMAT than 3D-CRT, but doses of around normal organs was higher IMRT, VMAT than 3D-CRT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.714-721
• /
• 2018

In this study, we investigate a design technology intended to radically increase the buckling strength of vertically curved panels. Recent studies proposed a buckling strength formula which properly reflects the effect on the local plate buckling strength of flat plates when they are stiffened by closed section ribs. Herein, we attempted to quantitatively evaluate this effect on curved panels and to reveal the correlations with the design parameters. The commercial finite element software, ABAQUS, was used to build a three dimensional numerical model and numerical parametric studies were conducted to evaluate the variation of the buckling strength. In the case of flat panels, the local buckling strength of stiffened curved panels increases proportionally with increasing rotational stiffness of the closed-section ribs. After attaining a limiting value, an obvious tendency was found that the local buckling strength of the stiffened curved panel would converge towards a fixed value when the panels are supported along both sides. The parametric studies performed using the influential design parameters confirmed that the estimated partially-restrained curved panel strength is well correlated with the proposed formula.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.1
• /
• pp.21-26
• /
• 2002

The behavior of the biological water treatment process on start-up operation was evaluated in the integrated recirculating aquaculture system consisting of a double drain type rearing tank ($2.5 m^3$), a sedimentation tank, a floating bead filter, a foam separator and a rotating biological contactor. A system was stocked with nile tilapia (Oreochromis niloticus) at an initial rearing density of $2\%$ for 2 weeks for acclimated rotating biological contactor. The total ammonia nitrogen (TAN) level increased to $13.6 g/m^3$ on day 4 after adding feed and was decreased to $0.3 g/m^3$ on day 7. The total suspended solid was completely removed during overall experimental period.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.29-35
• /
• 2014

Purpose : This study has already started commercial Gated RapidArc automation equipment which was not previously in the Gated radiation therapy can be performed simultaneously with the VMAT Gated RapidArc radiation therapy to the accuracy of the analysis to evaluate the usability, Amplitude mode applied to the patient. Materials and Methods : The analysis of the distribution of radiation dose equivalent quality solid water phantom and GafChromic film was used Film QA film analysis program using the Gamma factor (3%, 3 mm). Three-dimensional dose distribution in order to check the accuracy of Matrixx dosimetry equipment and Compass was used for dose analysis program. Periodic breathing synchronized with solid phantom signals Phantom 4D Phantom and Varian RPM was created by breathing synchronized system, free breathing and breath holding at each of the dose distribution was analyzed. In order to apply to four patients from February 2013 to August 2013 with liver cancer targets enough to get a picture of 4DCT respiratory cycle and then patients are pratice to meet patient's breathing cycle phase mode using the patient eye goggles to see the pattern of the respiratory cycle to be able to follow exactly in a while 4DCT images were acquired. Gated RapidArc treatment Amplitude mode in order to create the breathing cycle breathing performed three times, and then at intervals of 40% to 60% 5-6 seconds and breathing exercises that can not stand (Fig. 5), 40% While they are treated 60% in the interval Beam On hold your breath when you press the button in a way that was treated with semi-automatic. Results : Non-respiratory and respiratory rotational intensity modulated radiation therapy technique absolute calculation dose of using computerized treatment plan were shown a difference of less than 1%, the difference between treatment technique was also less than 1%. Gamma (3%, 3 mm) and showed 99% agreement, each organ-specific dose difference were generally greater than 95% agreement. The rotational intensity modulated radiation therapy, respiratory synchronized to the respiratory cycle created Amplitude mode and the actual patient's breathing cycle could be seen that a good agreement. Conclusion : When you are treated Non-respiratory and respiratory method between volumetric intensity modulated radiation therapy rotation of the absolute dose and dose distribution showed a very good agreement. This breathing technique tuning volumetric intensity modulated radiation therapy using a rotary moving along the thoracic or abdominal breathing can be applied to the treatment of tumors is considered. The actual treatment of patients through the goggles of the respiratory cycle to create Amplitude mode Gated RapidArc treatment equipment that does not automatically apply to the results about 5-6 seconds stopped breathing in breathing synchronized rotary volumetric intensity modulated radiation therapy facilitate could see complement.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.1
• /
• pp.46-54
• /
• 1993

On the purpose to increase the cultivation stability of the hulless waxy barley which is unstable in the northern region of Korea, the effects of genes of hulled /hulless and waxy /nonwaxy on seedling emergency was studied by using four isogenic lines of hulled -waxy, hulless -waxy, hulled -nonwaxy and hulless -nonwaxy barley. The germination rates of hulless lines lowered by four to six percent compared with those of hulled counterparts with one day's rainfall just before harvest, and were much deteriorated with raining prolonged. The gaps between emergency rates of hulless lines and their counterparts were greater than those of germination rates, and the differences increased as the seeding depths were deepened. The emergency rates of hulless lines were affected in the order of seeding depth, rotation speed of thresher and preharvest rainfall. Waxy endosperm gene did not show any significant effects on the damage of grain during threshing. It seems that the embryos of hulled lines were less damaged than those of hulless ones during threshing due to the protecting effects by husks. When grains were threshed with thresher of 600rpm or 900rpm and dehulled with dehuller of 750rpm, any significant depreciations such as broken seeds and decreased germination rate did not occured in hulled lines. But the grains of hulless lines received some damages with the rotation speeds, especially germination rates decreased seriously when the rotation speed of de huller was high. Prehavest sprout rates of the lines incorporated with the waxy genes were higher than those with nonwaxy genes whereas the genes of hulled and hulless did not give any significant effects.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1237-1244
• /
• 2015

A gerotor can be manufactured in a miniature size because it has a high discharge per cycle and a simple structure. Gerotors are widely used for the lubrication oil of an engine and as the hydraulic source of an automatic transmission. Recently, improvements in fuel efficiency and noise reduction have come to the fore in the automobile industry, and it has been necessary for better fuel efficiency to continuously improve the flow rate and noise of internal gear pumps through the optimal design of the gerotor and port shape. In this study, gerotors were generated based on the equations derived for a lobe shape with multiple profiles (ellipse 1-elliptical involute-ellipse 2). The ranges of the design parameters were considered to prevent a cusp and loop. In addition, the optimal lobe shape was obtained by determining the influence of the lobe shape on the performances (flow rate, irregularity, etc.), according to the values of the design parameters.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.401-413
• /
• 1988

To investigate the users' activity, impact and psychology in Naejang Temple district at Mt. Naejang National Park in Korea, users' density and questionnaire survey at three major picnic areas and passenger counting at major pass were executed and environmental impacton on the site was surveyed. The total number of visitors showed stability at the level of one million persons every year after 1984. Users' impact was much severe along the main trail, the upper cablecar station and the slope from the observatory to Keumsun Valley, The maximum momentary number of users was estimated as 53,000 persons in autumn. Approximately 20% of the total number of visitor used Keumsun Valley and Weonjeok Valley area and 80% of visitors left after using only grassland and cablecar. The visitors' characteristics was similiar to the type of long-distanced national park and the main visiting purpose was to see autumn leaves. The psychological satisfaction did not very significantly as to increasing user's speace. As a result of varimax rotated factor analysis, the 1st factor, most affecting users' psychological satisfaction, was related to landscape and consisted of nature disturbance, crowdedness, noisiness, cleanness, in order of importance. The 2nd factor was related to facilities and consisted of number of toilet, number of waste-baskets, amount of drinking water, safety, in order of importance.