• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.202-208
• /
• 2016

최근 5년간 발생한 국적 항공기 사고 23건 중 헬기사고가 16건으로 전체 항공사고의 70%를 차지한다. 현재 국내에서 고정익 항공기 549대, 회전익 항공기 186대가 각각 운영(군 경찰 보유헬기 제외)되고 있음을 감안하면 회전익 항공기 사고가 훨씬 높은 편이며, 고정익 항공기 가동시간에 비하여 가동률이 매우 낮은 회전익 항공기를 고려하면 비행시간당 항공기 사고 비율은 회전익 항공기가 월등하게 높은 편이다. 또한 고정익 항공기의 평균기령은 10.9년인데 비하여 산림항공본부를 비롯한 헬기운영업체에서 운영 중인 회전익 항공기의 평균기령은 18.9년으로 회전익 항공기가 전체적으로 노후화 되어 있으나, 국적항공사에 운영 중인 노후 항공기 관리프로그램을 회전익 항공기 운영사에서는 운영하지 않고 있다. 따라서 본 연구를 통하여 노후 항공기 운영현황을 검토하여 노후 회전익 항공기 운영기준을 수립하고 노후 회전익 항공기의 정비프로그램을 정립하여 회전익 항공기의 지속감항성을 확보할 수 있는 방안과 수명주기 설정을 마련하고자 한다.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.196-204
• /
• 2008

Modem rotorcraft is required to have the capability to operate in all-weather conditions. Also icing condition is important issue to aircraft safety and certification. And rotorcraft icing research has come a long way during the past few decades. The aircraft icing is the most difficult to handle. So, icing-related accidents, incidents and operating problems still occur regularly in service, despite improvements in design and test techniques. By reviewing icing certification requirement of FAR(Federal Aviation Regulations) and KAS(Korean Airworthiness Standard), this paper describes methods how to demonstrate safety in the flight and consideration of icing when rotorcraft is required TC(Type Certification).

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.1
• /
• pp.104-111
• /
• 2007

내충돌성(crashworthiness)은 항공기 추락시 탑승객을 보호할 수 있는 항공기와 그 내부 시스템 및 구성품의 성능으로 정의할 수 있다. 민간 항공 분야에서 내충돌성에 대한 체계적인 연구가 시작된 것은 1980년대로서 90년대에 이르러서야 감항 기준으로서 완성되게 된다. 항공기의 안전성과 관련된 주요 설계 요건들이 이미 50-60년대에 기본적인 틀을 갖추었다는 점을 감안하면 내충돌성과 관련된 설계 요구조건은 상대적으로 새로 운 설계 개념으로 생각할 수 있다. 본 논문에서는 회전익 항공기를 중심으로 내충돌성 확보를 위해 고려해야 할 사항을 살펴보고, 현재 민간 회전익 항공기에 적용되고 있는 주요한 내충돌성 설계기준을 소개하도록 한다.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.79-83
• /
• 2016

1990년부터 14년간 총 65건의 회전익 사고가 발생하여 연 평균 4.6건의 사고가 발생하였다. 항공대국으로 안전한 수준에 이르기 위하여 회전익 항공기 사고의 잠재적 조건 선행 분석자료 및 연구결과 등을 활용하여 회전익 항공기 항공안전대책을 살펴보았다. 소방항공의 경우 인적요인이 사고 발생원인의 57%로 주 요인으로 나타났으며, 국가기관에서도 2000년 이후 사고 중에서 인적요인이 주 요인으로 인적요인이 중요한 개선대상으로 밝혀졌다. 항공안전 전문가들과 인터뷰를 실시하여 회전익 항공기의 잠재 조건에 대해 논의하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.243-250
• /
• 2012

In this paper, a systematic consequence of evaluation method, procedure, and flight data analysis is investigated for application of ADS-33E-PRF to UAV. And it is applied to unmanned rotorcraft for evaluation. CNUHELI-020, which is developed in Chungnam National University, is used for assessment of handling quality: decoupled longitudinal and lateral/directional model were used to assess handling qualities. Evaluation flight maneuvers are categorized as hover/low-speed requirements, small-amplitude attitude change, and moderate-amplitude attitude change requirements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.9-15
• /
• 2005

This paper describes the test carried out on an experimental study of fuselage drag and stability characteristics of a helicopter configuration and the test techniques developed for the testing and the lessons learned in the Agency for Defense Development Low Speed Wind Tunnel(ADD-LSWT). The main objective of this test is to determine the drag and stability characteristics of helicopter configurations according to the various configuration changes. The fuselage model with a highly modular structure is a representation of 1:8 scale of the external contour of the conceptual design helicopter configuration with rotating main rotor hub including blade stubs capable of rotating up to 500 rpm. The test results are compared with the available similar data and fair to good agreement is obtained.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.22-31
• /
• 2005

A design study was conducted for a new concept aircraft(Canard Rotor/Wing: CRW) that has the capability of dual mode flight, a rotorcraft and a fixed wing mode. The CRW can show a vertical take off/landing and a high speed/efficiency cruise performance simultaneously. It is not surprising to develop a new sizing code for this class of aircraft because conventional sizing codes developed solely for either the rotary wing or the fixed wing aircraft are not adequate to design a dual mode aircraft operated both by the rotary wing through tip jet effux and the fixed wing lift. Thus, a new design code was developed based on the conventional sizing code by adding some features including rotor performance, duct flow, and engine flow analysis, hence could eventually predict the performance of reaction driven rotor, the flight performance and the flight characteristics. The various design parameters were investigated to find their influences on the flight performance then, a small UAV(Unmanned Aircraft Vehicle) of 1500 lbs class was optimally designed to have minimum weight using the developed sizing code.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.16-23
• /
• 2021

Domestic and foreign manufacturers are developing VTOL UASs in various shapes in line with demand for future technologies. UASs have been developed in a shape classified as fixed/rotary wing, and verified by appropriate certification standards. However, airworthiness certification of recent VTOL UASs is strict with the absence of VTOL-specific certification standards. In this paper, criteria applicable to VTOL UAS were presented through analysis of STANAG-4671 and STANAG-4702, which are certification standards for fixed/rotary wing UAS of the North Atlantic Treaty Organization (NATO) and the Special Condition for VTOL Aircraft (SC-VTOL) of European Aviation Safety Agency (EASA). For this, the categorization criteria of general/fixed-wing/VTOL characteristics were established for each standard item and utilized for analysis.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.255-261
• /
• 2023

A main purpose of this research was to analyze environmental factors to influence helicopter accidents contrary to the fact that the almost 80% of helicopter accidents happened due to pilots' human errors. There have been about 14 helicopter accidents in civil aviation sector last decade. It is noteworthy that nine of 14 accidents happened during the external sling load operation. Moreover, there is no law or regulation which could cover the helicopter external sling load operation or human external cargo in Korea. In this paper, it was analyzed the training and education regulations regarding helicopter external sling load operation or human external cargo in regulations of FAA and EASA, Based on analyzing and comparing the FAR part 133 and domestic aviation law (aviation safety act and flight safety regulations), it was found out the implication how to apply helicopter type rating for external sling load operation and human external cargo operation. To sum up, this paper expect central government should cooperate and amend aviation law which apply external sling load operation and external cargo to establish sound safety culture in Korea.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.9-16
• /
• 2017

Researchers are now faced with a limited flight time of the hoverable UAV due to the sluggish technological advances of the Li-Po energy density and try to find a bypassing solution for the fully autonomous hoverable UAV mission planning. Although there are several candidate solutions, automated wireless charging is the most likely and realistic candidate and we are focusing on the autolanding strategy of the hoverable UAV in this paper since it is the main technology of it. We developed a hoverable UAV flight simulator including Li-Po battery pack simulator using MATLAB/Simulink and UAV flight and battery states are analyzed. The maximum motor power measured as 1,647 W occurs during the takeoff and cell voltage decreases down to 3.39 V during the procedure. It proves that the two Li-Po battery packs having 22 Ah and connected in series forming 12S1P are appropriate for the autolanding mission planning.