• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.43-45
• /
• 2023

현재 운용 중인 전구식 회전식 등명기의 운용현황과 문제점을 알아보고, 이를 개선하기 위한 개선 방향을 검토 후 가장 근본적인 문제 해결을 위한 전구를 대체할 새로운 광원으로 LED를 선정하고 선정된 새로운 광원을 이용한 고광도의 LED 회전식 등명기의 개발에 따른 장점과 기존의 규정 및 검사 방식에 대한 의견을 제시한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.28-30
• /
• 2022

종래의 프레넬렌즈가 회전하는 중대형 회전식 등명기는 고압방전등(메탈할라이드) 전구를 광원으로 사용하고 있으나, 에너지효율, 수은 등의 함유로 인한 환경오염과 폐기 문제로 인해 2010년 초에서 현재에 이르기까지 선진국을 중심으로 사용규제가 강화되고 있는 실정이다. 국내에 설치 운영되고 있는 회전식 등명기는 내용연수 초과 혹은 도래시기 점차 다가오고 있기 때문에 이에 대한 대응 방안이 필수적인 상황이다. 프레넬렌즈를 회전시키는 회전식 등명기의 LED 광원 개발은 2010년 초부터 해외업체에서 제품출시가 이루어졌으나 국내 중대형 회전식 등명기에 적용된 사례는 없으며 국내에서도 해당 기술 미비로 개발된 사례가 없었다. 이에 본 연구를 통해 단일 고출력 COB LED, 리플렉터, 집광렌즈 등을 이용한 가상초점광원 구현 기술로 회전식 등명기용 LED 광원 연구를 수행하고 해당 연구기술이 적용된 시제품 제작을 통해 성능을 검증하였다.

• Journal of the KSME
• /
• v.54 no.3
• /
• pp.47-51
• /
• 2014

이 글에서는 요양시설에서 고령자의 수발에 필요한 실내이동 복합기능형 베드부 회전식 리프트의 핵심기술 개발 및 사용성 평가를 통한 유효성 검증 결과에 대하여 소개하고자 한다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.101-106
• /
• 2009

Although ADCP(Acoustic Doppler Current Profiler) have been introduced and utilized for flow measurements since the end of 1990's, in-situ behavior performance of ADCP at stream gauging stations has not been evaluated in Korea. The purpose of this study is for verification and application of velocity measurements using a price meter and ADCP. The verification of measured velocities was carried out in a laboratory open-channel. The differences between the two velocity values measured by a pirce meter and ADCP are within 2.1%, which means that ADCP can be used at stream gauging stations. After verification, ADCP was applied to the Maekok stream selected as a test site for application. for application. The test application was performed by comparison of velocity results measured by ADCP and a price meter. Results show that the velocity values obtained by using ADCP coincide well with those by using conventional devices with the average measurement discrepancy of 10.5%.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.06a
• /
• pp.99-110
• /
• 1998

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.175-179
• /
• 2016

수상 태양광 발전시설은 댐이나 호소, 저수지의 잉여공간인 수면역에 설치하여 수위 변동에 대응하고 육상 대비 발전효율이 높은 발전시스템이지만 수상 태양광 발전시설의 설치로 인하여 수질오염 및 수생태계 교란을 야기할 수 있다는 우려가 지속적으로 대두 되고 있다. 본 연구는 안성시에 위치한 금광저수지 내 수상회전식 태양광 발전시설의 모니터링을 통해 발전시설의 설치가 수질에 미치는 영향을 파악하고자 하였다. 본 연구에서는 수상회전식 태양광 발전시설로 인하여 차광이 되는 차광구역 6지점과 그 외 비차광구역 4지점을 선정하여 차광으로 인한 수질의 변화를 알아보고자 하였다. 연구 결과 수상회전식 태양광 발전시설의 설치로 인하여 수체의 차광 및 광에너지 저하로 인한 수질 및 조류 농도의 변화는 통계학적으로 유의할 정도(p<0.05)의 수준은 아닌 것으로 판명되었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.7
• /
• pp.516-523
• /
• 2013

The tip clearance effect on counter-rotating ducted fan of VTOL UAV in hovering condition, was investigate using computational analysis. The $k-{\omega}$ SST turbulence model is employed in this study. The numerical results of baseline model are validated by wind tunnel test in hovering and forward conditions. It is observed that if tip clearance of one rotor in the counter-rotating ducted fan increase then the thrust coefficient of another rotor increases. In Addition to this, when the tip clearance of the rear rotor increases, the thrust of the ducted fan is improved due to increasing of average total pressure at exit plane.

• Tunnel and Underground Space
• /
• v.9 no.4
• /
• pp.328-336
• /
• 1999

To characterize the hydro-mechanical behavior of a rock joint, a rotary shear testing apparatus was devised in this study. Shear stress was driven by twisting the end of a sample in the rotary shear testing apparatus. The test results show that the rotary shear test underestimates the peak shear strength of a rock joint. The torque is known as a function of the radial distance from the axis of rotation, resulting in the radial variation of the shear stress. Fluid flow through rock joints is mainly dependent on the Joint roughness, contact area, initial aperture. To examine the dependency, the relationship between the hydraulic and the mechanical apertures for shear-flow was established by measuring the initial aperture. It shows that the mechanical aperture and the hydraulic aperture increase linearly with the dilatancy. The difference between the hydraulic and mechanical apertures describes the deviation from the behavior predicted by the parallel plate model.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.305-310
• /
• 2007

For the understanding of the complex flow characteristics in the counter-rotating axial flow fan, it is necessary to investigate the three-dimensional unsteady flow fields in the counter-rotating axial flow fan. This information is also essential for the prediction of the aerodynamic and acoustical characteristics of the counter-rotating axial flow fan. Experimental study on the three-dimensional unsteady flow in the counter-rotating axial flow fan is carried out at the design point(operating condition). Three-dimensional unsteady flow fields in the counter rotating axial flow fan are measured at the cross-sectional planes of the upstream and downstream of each rotor using the $45^{\circ}$ inclined hot-wire. Three-dimensional unsteady flow fields in the counter-rotating axial flow such as the wake, the tip vortex and the tip leakage flow are shown the form of the velocity vectors and the velocity contours.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.267-276
• /
• 2001

On the basis of structural analysis of the radial gate(that is, Tainter gate), this paper focuses on the optimization of the moment distribution according to the location of the arm of the radial gate. In spite of its importance from economical view point, we could hardly find the study on the optimum design of radial gate. Accordingly, the present study identifies the optimum section modulus for a radial arm along with the optimum position for 2 of 3 radial arms with a convex cylindrical skin plate relative to a given radius of the skin plate curvature, pivot point, water depth, ice pressure, etc. These optimum measurements are then compared with previously constructed radial gates. The results indicate that the optimum section modulus vague for a radial arm was appreciably smaller than the previously constructed examples.