• 한국해양학회지
• /
• v.29 no.2
• /
• pp.83-94
• /
• 1994

Two-dimensional tidal and tidal residual currents in Chinhae Bay are investigated by field observations, hydraulic and numerical experiments. The results of hydraulic and numerical model experiments roughly coincide with the field measurements. Maximum tidal currents during the spring and neap tides in Kaduk and Kyunnaeryang channel and the central channel of Chinhae Bay are strong as 90 to 110 and 30 to 40 cm/s respectively, and strong tidal residual currents having numerous eddies take place. Maximum tidal currents during the spring and neap tides in the western and northern parts of the bay are weak as below 30 and 10 cm/s respectively, and also tidal residual currents are relatively weak. Tidal residual currents in the northern part of Kajo-do go toward the north, whereas the currents in the southern part move down the bay, and the currents rotating clockwise occur around Bu-do. The surface currents in the bay depend strongly on the wind and river inflow, and such phenomena are more remarkable during he neap tide than the spring tide.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.2
• /
• pp.80-85
• /
• 2017

Purpose The D530c have cadmium zinc telluride(CZT) detectors that are arranged focus on the heart. This structural characteristic allows for quicker imaging without rotation, but this is sensitive to patient movement and can affect the test results. The aim of this study is to optimize the image quality by reducing patient movement during the examination. Materials and Methods We analyzed the patients' movements, and performed various activities such as provided patient education about correct breathing techniques and avoiding patient movements, and created breathing correction tools to minimize patient movement during exam. The 70 patients who underwent myocardial perfusion SPECT with D530c in November 2016 were categorized as the group before the corrective steps. Another 70 patients who underwent the procedure with D530c from February 14, 2017 to February 21, 2017 were categorized as the improvement group. Images acquired during stress and at rest were compared and analyzed by measuring the durations of heart movements over certain distances (4 mm, 8 mm, 12 mm, or more) noted on the x-, y-, and zaxes. Results After the activities, the durations of heart movements decreased in the images acquired both under stress and at rest. In particular, there were no large motions greater than 12 mm recorded in the stress images after the improvement. There was a significant difference (p<0.005) in the 4-mm and 8-mm fluctuations on the X-axis and the 8-mm fluctuations on the Z axis in the stress images, but there was no significant difference (p>0.005) in the other stress and rest intervals. Conclusion The decrease in the time of motion occurrence due to the 4 mm fluctuation distance that can occur through breathing can be understood as a result of the breathing being corrected through training and motion prevention tools. It is expected that the image quality will be improved by reducing the occurrence time according to the variation distance of 8 mm or 12 mm, which is expected as the actual movement of the patient other than the breathing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.624-634
• /
• 1995

Tides at both of northern and southern entrances of Kamag Bay were compared by deploying tide gauges for 18 days during July-August 1994. To examine the response of the inner bay to the tidal waves through both entrances, a current meter was moored at the eastern pan of the inner bay. Current meter mooring failed at the northern entrance (Yosu) while the current data was collected for only 5 days at the southern site (Songdo). Maximum range was 357 and 352 cm at Yosu and Songdo, respectively. Respective amplitudes for M2, S2 Kl O1 tides of 95.5, 48.8, 20.5, 14.0cm at Yosu and 93.6, 47.2, 21.3, 13.1cm at Songdo yielded the form numbers of 0.23 and 0.24, respectively, both of which belong to the predominantly semidiurnal tide, Contributions from the overtides and compound tides were less than $4\%^ at both sites. Differences in Greenwich phase of major partial tides between two sites were negligible. Maximum speed of tidal current was about 100cm/sec at the southern entrance and about 40cm/sec at the inner bay. Residual current speed was 17cm/sec southwestward at the southern entrance and 0.9cm/sec southeastward at the inner bay. Temporal change in current at the inner bay showed that the wind had a significant influence upon the circulation in Kamag Bay.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.409-418
• /
• 2020

The purpose of this study is to analyze the economic feasibility of public postpartum care centers established for health care of low-income postpartum mothers. 6 of 8 public postpartum care centers were used to verify the economic feasibility and research data were collected through the centers. A sensitivity analysis was performed with the bed turnover rate, assuming that users in a postpartum care center will be decreased. As a result, B/C ratio was estimated to be 1.50 and the net benefit was estimated to be KRW 186,557 in million. A sensitivity analysis showed that B/C was 1.42 at 17.4 of bed turnover rate and 1.26 at 15.4 which indicates the lowest bed turnover rate among subjects. A public postpartum care center was evaluated as economically feasible as public works. Therefore it is necessary that the public postpartum care centers operated by local governments should be expanded through legal amendment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.541-550
• /
• 2021

While open-air compost has value as a source of nutrients for crops in agricultural land, it acts as a pollution that adversely affects the environment during rainfall, and management is required. In this study, it was intended to analyze the accuracy of calculating open-air compost volume using fixed-wing UAV (unmanned aerial vehicle) capable of acquiring a wide range of images and automatic path flights and to identify the possibility of utilization. In order to evaluate the accuracy of calculating the three open-air compost volume, ground LiDAR surveys and precision surveys using a rotary UAV were performed. and compared with the open-air compost volume acquired through a fixed-wing UAV. As a result of comparing the calculation of open-air compost volume based on the ground LiDAR, the error rate of the rotary-wing was estimated to be ±5%, and the error rate of fixed-wing was -15 ~ -4%. one of three open-air compost volume calculated by fixed-wing was underestimated as about -15 %, but the deviation of the open-air compost volume was 2.9 m3, which was not significant. In addition, as a result of periodic monitoring of open-air compost using fixed-wing UAV, changes in the volume of open-air compost with time could be confirmed. These results suggested that efficient open-air compost monitoring and non-point pollutants in agricultural for a wide range using fixed-wing UAV is possible.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.6
• /
• pp.642-648
• /
• 2015

Recently, there have been many studies pertaining to reducing energy consumption on ships. As part of those studies, the energy consumption of ships can be reduced by understanding and controlling the varying loads, excluding fixed loads. In existing ships, engine room fans are usually operated based on the actual experience of the crew without any special guidelines. To realize energy reduction, we investigate the characteristics of engine-room fans, and we propose an energy-management system called the engine room fan control system (ERFCS) and the ERFCS algorithm. The ERFCS controls the fan speed depending on the temperature and pressure, where one to four fans are operated depending on changes in the load. In addition, the minimum rotation speed of the engine-room fan was limited to 50% to prevent the surging phenomenon, which is due to fan damage or low pressure resulting from mechanical friction or heating at low fan speeds. We develop a fan control system simulation model using LabVIEW that is based on the proposed algorithm and ISO 8861. Finally, we perform simulations to confirm that operation of the proposed fan control system is possible using only 46.4% of the power required by the existing method.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.73-73
• /
• 2017

가축의 영양소 요구량 유지, 비육, 증체, 생산, 번식, 계절환경에 따라 달라지는 변동요인을 감안하여 하루 동안에 필요로 하는 영양소 요구량을 충족하도록 여러 종류의 사료를 혼합한 TMR(Total Mixed Ration)사료의 중요성이 커지고 있다. 이에 가축의 생산성 향상(등급 향상)과 축산농가의 영농비용 절감, 생력화를 위해 범용적으로 사용가능한 TMR플랜트의 개발이 반드시 필요하다. 본 연구에서는 사료비절감을 위한 식품부산물 발효탱크의 개발을 통해 발효탱크 밑 부분을 구성하고 있는 스위프오거와 이를 고정하면서 Z축으로 회전하는 고정부를 대상으로 하여 시각화 할 수 있는 FEM 시뮬레이션 기법을 이용하여 작업 중 적용되는 하중에 대해 충분한 구조 안전성을 가지고 있는지 해석하였다. 스위프오거의 재질은 SM45C, 작용하는 하중은 감속기의 출력량, RPM을 이용하여 토크 값을 구하고 조사료와 부산물사료가 포함된 TMR사료의 무게와 스위프오거의 단면적을 이용하여 압력 값을 도출하였다. 하지만 부산물사료가 발효되면서 저장탱크를 통해 배출되기 때문에 전체 사료 무게가 줄어 스위프오거에 작용하는 압력 또한 작아지는 것을 확인하였다. 이에 본 연구에서는 저장탱크에서 TMR사료가 배출되기 직전의 가장 높은 압력 상태를 가정하였다. 이 가정을 통해 토크 값은 $1.4N{\cdot}m$, 압력 값은 43 Mpa으로 나타났고 이를 바탕으로 구조해석을 진행하였다. 그 결과 스위프오거는 고정단 부근에서 최대 폰 미세스 응력 310 Mpa이 발생하여 구조적으로 가장 취약한 것으로 나타났다. 하지만 이는 SM45C의 항복강도인 343 Mpa 보다 낮아 안전한 것으로 분석된다. 또한 사료가 배출되면서 스위프오거에 작용하는 압력이 작아져 폰 미세스 응력도 작아지는 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1886-1896
• /
• 1991

This paper presents a method to predict the flying height of the head slider in a hard disk drive. Quantitative predicts of the flying height according to the variations of the external load and the disk velocity have been done by numerical computation. In addition, the magnitude of the external load to keep flying height constant were also suggested. The Modified Reynolds' equation driven from hydrodynamic lubrication theory under slip flow condition was used to describe air-bearing system under the slider. To solve the equation, a Finite Volume Method (FVM) has been applied. To determine the final minimum flying height and pitch angle of the head slider, the Secant iteration method is used which update initial guess of the minimum flying height and pitch angle of the slider. In this study, the model head slider has been selected from a real hard disk drive which is equipped in many commercial personal computers. As a result, as the disk velocity increases at constant external load, the minimum flying height and the pitch angle increase due to the in crease of the air-bearing force at the bottom of slider.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.35-42
• /
• 2001

We demonstrated the importance of initial estimates of model parameters and the utility of an optimization approach of the uncertain forcing of wind-driven circulation off the southeastern coastal waters of Korea. The wind stress represents the upper boundary condition in this model and enters in the model equation as a forcing term in the numerical formalism. The wind field contributes to maintain the almost time-independent distribution of the upper layer thickness feature in a north-south direction and negative wind stress curl to maintain the formation of warm eddy off the southeastern coastal waters of Korea. Elucidated is the variational characteristics of the East Korean Warm Current due to the variations of the zonally averaged wind stress (southward transport) from the seasonal variations of the meridional transport by the Ekman transport.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1370-1378
• /
• 2007

High speed railway bridge is affected on safety of bridge by dynamic amplification effect, when dynamic response of bridge is equal to effect cycle load for rolling stock axle according to high speed operation train. And excessive deformation of structure has negative effect on operation safety of train and comfort of passenger due to fluctuation of wheel load by torsion of track etc. and decrease of contact force on vehicle wheel-rail. To ensure the safety of track and train operation safety, it is have to perform the study on resonance and deformation of structure. That criteria and requirement of railway bridge is limitation of vertical acceleration on deck for dynamic behavior of structure, contact of vehicle wheel and rail, limitation of face distortion and rotation angle of end deck, and limitation of vertical displacement by train. Unlike KYEONGBU High Speed Railway, New constructed HONAM High Speed Railway have to applied the new requirement for dynamic behavior safety according to change of condition which is type of ballast (slab ballast), interval of track, and actual rolling stock load. Therefore, in this paper, it was conformed the dynamic characteristic due to parameter, which related with above mentioned criteria, for steel composite bridges.