• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.337-344
• /
• 2006

KVN simulation, which is focused on evaluating the impacts of KVN to geodetic VLBI network, was performed. The KVN is under construction with three radio telescopes VLBI system for radio astronomy and space geodesy. To distinguish the impacts of KVN on global and local scale networks, we designed two different sizes of VLBI networks, namely, KVN-Asia and KVN-Pacific. While the former consisted of Far East Asia region VLBI stations, the latter consisted of pacific region VLBT stations. The primary purpose of our simulation is quantitative evaluation of KVN impacts before and after the participation of KVN in the previous two virtual networks. We selected two different sets of parameters to be estimated in the simulation as indices of evaluating estimation precision: station coordinates and EOPs. The station coordinates are evaluating index for KVN-Asia and the EOPs are another evaluating index for KVN-Pacific. From the simulation results of comparisons between evaluating indexes, 50% and 20% of maximum improvements for KVN-Asia and KVN-Pacific were anticipated respectively. We expect that the space geodetic use of KVN will be focused on the several promising research fields which are proposed through the simulation results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.69-74
• /
• 2018

Large industrial motors require a large area because of the high risk of shutdown accidents and large industrial accidents due to the lowering of the dielectric strength of the armature windings and overheating problems. Therefore, there is a demand for a large-capacity motor that has small size, light weight, and excellent dielectric strength compared with conventional motors. Superconducting motors have advantages of high efficiency and output power, low size, low weight, and improved stability. This results from greatly increasing the magnetic field generation by using superconductive field coils in rotating machines such as generators and motors. It is very important to design and analyze the cooling system to lower the critical temperature of the wires to achieve superconducting performance. In this study, a field loss analysis and low-temperature heat transfer analysis of the cooling system were performed through the conceptual design of a 100-HP high-temperature superconducting synchronous motor. The field loss analysis shows that a uniform pore magnetic flux density appears when high-temperature superconducting wire is used. The low-temperature heat transfer analysis for gaseous neon and liquid neon showed that a flow rate of 1 kg/min of liquid neon is suitable for maintaining low-temperature stability of the high-temperature superconducting wire.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.554-560
• /
• 2020

In the manufacturing process of flat panel displays, a high-precision planar motion stage is used to position a specimen. Stages of this type typically use frictionless linear motors and air bearings, and laser interferometers. Real-time dynamic correction of the yaw motion error is very important because the inevitable yaw motion error of the stage means a change in the specimen orientation. Gantry control is generally used to compensate for yaw motion errors. Flexure units that allow rotational motion are applied to the stage to apply this method to a stage using an air-bearing guide. This paper proposes a method to improve the constant speed motion performance of a H-type XY stage equipped with air bearing and flexure units. When applying the gantry control to the stage, including the flexure units, the cause of the mutual ripple generated from the linear motors is analyzed, and adaptive learning control is proposed to compensate for the mutual ripple. A simulation was performed to verify the proposed method. The speed ripple was reduced to approximately the 22 % level. The ripple reduction was verified by simulating the stage state where yaw motion error occurs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3587-3593
• /
• 2009

Nowadays, the PV systems have been focused on the interconnection between the power source and the grid. The PV inverter, either single-phase or three-phase, can be considered as the core of the whole system because of an important role in the grid-interconnecting operation. An important issue in the inverter control is the load current regulation. In the literature, the Proportional+Integral (PI) controller, normally used in the current-controlled Voltage Source Inverter (VSI), cannot be a satisfactory controller for an ac system because of the steady-sate error and the poor disturbance rejection, especially in high-frequency range. By comparison with the PI controller, the Proportional+Resonant (PR) controller can introduce an infinite gain at the fundamental ac frequency; hence can achieve the zero steady-state error without requiring the complex transformation and the dq-coupling technique. In this paper, a PR controller is designed and adopted for replacing the PI controller. Based on the theoretical analyses, the PR controller based control strategy is implemented in a 32-bit fixed-point TMS320F2812 DSP and evaluated in a 3kW experimental prototype Photovoltaic (PV) power conditioning system (PCS). Simulation and experimental results are shown to verify the performance of implemented control scheme in PV PCS.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.991-998
• /
• 2010

The effect of increasing the elevation of an IHX (intermediate heat exchanger) on the transient performance of the KALIMER-600 reactor pool during the early phase of a loss of normal heat sink accident was investigated. Three reactors equipped with IHXs that were elevated to different heights were designed, and the thermal-hydraulic analyses were carried out for the steady and transient state by using the COMMIX-1AR/P code. In order to analyze the effects of the elevation of an IHX between reactors, various thermal-hydraulic properties such as mass flow rate, core peak temperature, RmfQ (ratio of mass flow over Q) and initiation time of decay heat removal via DHX (decay heat exchanger) were evaluated. It was found that with an increase in the IHX elevation, the circulation flow rate increases and a steep rise in the core peak temperature under the same coastdown flow condition is prevented without a delay in the initiation of the second stage of cooling. The available coastdown flow range in the reactor could be increased by increasing the elevation of the IHX.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.453-458
• /
• 2006

An electrochemical COD(Chemical Oxygen Demand) sensor using an electrode-surface finding unit has been constructed. The electrolyzing(oxidizing) action of copper on the organic species was used as the basis of the COD measuring sensor. Using a simple three electrode cell, organic species which has been activated by the catalytic action of copper is oxidized at a working electrode, poised at a positive potential. A novel modification of the above method allowed for extended use of the electrode, in which the action of the electrode is regenerated by an electrode-surface grinding unit. When samples obtained from a wastewater treatment factory were measured, a linear correlation($r^2=0.93$) between the measured value(EOD) and $COD_{Mn}$ of the samples was observed. Overall results indicated that the electrochemical sensor with grinding unit could be applied for continuous measurements of COD in practical fields.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.155-155
• /
• 2011

일반적으로 I형 보에 횡하중이 작용하는 경우, 횡 변위와 함께 회전을 동반하는 횡-비틀림 좌굴(Lateral-Torsional Buckling)이 발생하게 된다. 이러한 I형 보의 탄성 및 비탄성 횡-비틀림 좌굴에 대한 해석적 이론적 연구는 이미 많은 연구자들에 의해 수행되었다(Timoshenko 등, 1961; Galambos, 1963; Lindner, 1974; Trahair, 1993). I형 보의 비지지 길이 내 하중이 작용할 때 모멘트 구배계수(Cb)는 하중이 부재 단면에 작용하는 위치에 따라 달라지게 되는데 이를 하중고 효과(Load Height Effects)라고 한다. 탄성 영역 내 비지지길이가 존재하는 I형 보의 하중고 효과를 고려한 모멘트 구배계수 제안식은 Nethercot & Rockey(1971)에 의해 연구된 바 있다. 또한 Helwig 등(1997)은 Nethercot & Rockey(1971)의 제안식을 간략화 하여 탄성 영역 내 비지지길이가 존재하는 I형 보의 하중고 효과를 고려한 모멘트 구배계수식을 제안하였다. 그러나 현재까지 진행 된 하중고 효과에 대한 연구는 탄성 영역 내 비지지 길이가 존재하는 I형 보에 대한 제안식이며 현재까지 비탄성 영역 내 비지지 길이를 갖는 I형 보의 하중고 효과에 대한 연구는 진행된 바 없다. 본 연구는 비탄성 영역 내 비지지 길이가 존재하는 I형 보의 하중고 효과를 고려한 비탄성 횡-비틀림 좌굴강도에 대한 연구를 수행하였다. 하중조건으로는 집중하중 과 등분포 하중을 적용시켰으며, 비선형 횡-비틀림 좌굴 해석을 위해 잔류응력 및 초기변형을 고려하였다. Pi와 Trahair(1995)이 고려한 단순직선분포를 잔류응력으로 가정하였으며, 국내 I형강 표준 치수 허용치(현대제철, 2006)에 근거하여 부재 길이의 0.1%를 초기 최대 횡 변위로 적용하여 초기제작오차로 고려하였다. 유한요소해석결과를 바탕으로 Nethercot & Rockey(1971)와 Helwig 등(1997)의 연구내용을 바탕으로 범용구조해석 프로그램(ABAQUS, 2007)을 이용하여 비탄성 영역 내 존재하는 I형보의 횡-비틀림 좌굴강도를 산정하였다. 유한요소해석결과를 바탕으로 Nethercot & Rockey(1971)및 Helwig 등(1997)의 모멘트구배계수 제안식과 비교 분석 하였고 회기분석프로그램 MINITAB(2006)을 이용하여 비탄성 영역 내 비지지길이가 존재하는 I형보의 하중고 효과를 고려한 모멘트구배계수식을 개발 제안하였다. 본 연구에서 개발된 제안식은 경제적이고 합리적인 휨부재 강도평가에 적극 활용될 수 있으며, 비탄성 영역내 I형보의 횡-비틀림 좌굴강도 및 휨강도 연구에 널리 활용될 것이다.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.95-100
• /
• 2006

The COMS(Communication, Ocean and Meteorological Satellite) EPS(Electrical Power Subsystem) is derived from an enhanced Eurostar 3000 version. Eurostar 3000 EpS is fully autonomous operation in nominal conditions or in the event of a failure and provides a high level of reconfigure capability. This paper introduces the COMS EPS preliminary design result. COMS EPS consists of a battery, a solar arrat wing, a PSR(Power Supply Regulator), a PRU(Pyrotechnic Unit), a SDAM(Solar Array Drive Mechanism) and relay and fuse brackets. COMS EPS can offer a bus power capability of 3 kW. The solar array is made of a deployable wing with two panels. One type fo solar cells is selected ad GaAs/Ge triple junction cells. Li-ion battery is base lined with ten series cell module of five cells in parallel. PSR associated to battery and solar array wing generates a power bus fully regulated at 50 V. Power bus os centralized protection and distribution by relay and fuse brackets. PRU provides power for firing actuarors devices. The solar array wing is rotated by the SADM under control of the attitude orbit control subsystem. The control and monitoring of the EPS, especially of the battery, is performed by the PSR in combination with the on-board software.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.57-71
• /
• 1983

마찰식 정미기의 성능에 영향을 미치는 기계설계 및 작동상의 인자로는 스크린의 형태, 롤러의 형태, 롤러회전속도, 출구 저항 등 여러가지가 있다. 이러한 요인들에 대한 연구가 본 논문의 저자에 의해서 시리즈로 연구되어 왔으며, 본 연구는 그의 일환으로 스크린의 단면형상(6각, 8각, 12각 그리고 원통형), 스크린에 뚫려있는 슬랏의 기울기($15^{\circ}$, $30^{\circ}$, $45^{\circ}$ 그리고 $-45^{\circ}$), 그리고 출구 저항이 정백미의 질과 양, 정백효율 그리고 정백실내의 정백압력 등에 미치는 영향을 규명하기 위해 수행되었다. 이 실험에 사용된 공시 정미기는 임도정 공장에서 널리 사용되고 있는 흡입마찰식이었며, 사용된 시료는 밀양 23호인 통일계품종이었다. 각 처리마다 동력 소모량과 정백실내의 정백압력을 측정하기 위해서 "KYOWA" 스트레인 게이지 시스템(strain gauge system), 토오크 변환기, 압력변환기 등이 사용되었다. 본 실험 결과를 요약하면 다음과 같다. 1) 정백과정중에 정백실내의 정백압력은 입구에서 가장 높았고 출구쪽으로 갈수록 점차 감소하였다. 평균 정백압력도 순환 횟수에 따라서 변화 하였는데 첫번째 순환에서 가장 높았고 순환횟수가 증가함에 따라 감소하였다. 2) 본 실험에서 사용한 출구저항 수준은 출구저항 수준 1에서 요구되는 정백도의 백미를 얻기 위한 순환 횟수는 2회 이었고 출구저항 수준 2에서는 4회 이었는데, 이를 출구저항 수준이 정백압력, 정백율, 완전미수율 및 도정 효율에 가장 큰 영향을 주었다. 3) 스크린에 뚫려있는 슬랏 각도가 $15^{\circ}$에서 $45^{\circ}$로 증가함에 따라서 정백실내의 평균 정백압력은 감소하였고, 완전미수율과 도정 효율은 증가하였으나, 일반적으로 도정수율은 감소하는 경향을 보였다. $-45^{\circ}$의 슬랏 각도를 가진 스크린에서는 슬랏 각도 $15^{\circ}$인 스크린에서와 거의 비슷한 정백압력 수준을 나타냈으나 완전미와 정백미의 생산은 매우 낮았다. 4) 스크린 표면에 기다란 강편 (보통 "띠"라고 부름)을 붙인 원통과 12각형의 스크린에서는 강편을 붙이지 않은 6각형과 8각형 스크린에서 보다는 비교적 높은 정백압력을 나타냈다. 전자는 후자에 비해서 정백효율은 높았으나 완전미수율은 떨어졌다. 5) 정백실내에서 가장 낮은 정백압력을 나타낸 8각형 스크린은 높은 도정수율과 완전미수율을 가져왔으나 상대적으로 정백효율은 낮게 나타났다. 6) 정백실내의 반경 방향의 평균 정백압력($P_R$)과 완전미수율($Y_h$)은 다음과 같은 1차적인 역비례 관계가 있었으며(평균 정백압력 범위는 0.5-0.9kg/$cm^2$), $Y_h=-28.661P_R+84.860$ ($r^2=0.858$) 정백효율($Y_e$)과 정백압력($P_R$) 사이에는 다음과 같은 2차적인 관계가 존재함을 알 수 있었다. $Y_e=-597.5P_{R^2}+929.96P_R-210.15$ ($r^2=0.759$) 정백효율은 정백압력이 0.7-0.8kg/$cm^2$일 때 가장 높았으며, 이때 변이도 가장 심한 것으로 나타났다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.107-114
• /
• 2017

A turbocharger is an engine supercharger that is driven by exhaust gas. It improves the output and fuel efficiency by increasing the charging efficiency of the mixture gas, which is achieved by changing the rotatory power of the turbine connected to the exhaust passage. It is important to control the supercharging for this purpose. A nozzle slide joint is one of the core parts. Austenitic stainless steel is currently used as the material for this part, and its excellent mechanical properties include high heat resistance and corrosion resistance. However, because of its poor machinability, there are many difficulties in producing products with complicated shapes. Machining is used in the production of nozzle slide joints for high dimensional accuracy after metal powder injection molding. As design variables in this study, we investigated the sintering temperature, product stress, deformation rate, radius of curvature of the punch, and angle of the chamfer punch, which are related to the strain and shapes. The goal is to suggest a forming process using Nitronic 60 that does not require machining to manufacture a nozzle slide joint for a turbocharger. Accordingly, we determined the best process environment using finite-element analysis, the signal-noise ratio, and the Taguchi method for experiment design. The relative density and hydrostatic pressure of the final product were in accordance with the results of the finite element analysis. Therefore, we conclude that the Taguchi method can be applied to the design process of metal powder injection molding.