• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.542-544
• /
• 2022

In this study, a basic study was conducted to confirm the wound recovering ability using LEDs. After cultured fibroblast on 6-wells we formed a wound. Here, LEDs of a specific wavelength are irradiated and check the wound healing through Matlab image processing. As a result, it was confirmed that fibroblast recovered faster when LED was irradiated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.40-43
• /
• 2003

전기방전에 대한 shed 재료의 열화내성과 우수한 발수성의 장기간 유지특성은 폴리머 애자의 장기성능에 있어서 가장 중요한 인자들이다. 애자 제조시 무결점 성형성 또한 중요한데 열화내성을 확보하기 위해 다량의 ATH의 첨가가 수반되기 때문에 적절한 process oil의 사용이 불가피하다. 사용하는 오일의 종류와 량에 따라 옥외절연물의 장기성능에 영향을 주는 표면발수성이나 방전내성은 크게 차이가 나는 것으로 밝혀지고 있다. 본 논문에서는 화학적 구조와 정도가 다른 몇 가지 실리콘 fluid들을 실리콘 고무에 처방하여 기본물성과 초고압 옥외절연물의 shed 재료로서 장기성능에 영향을 주는 방전열화내성과 표면발수성의 회복특성을 평가하였다. 실리콘 고무의 무결점 사출성형에 가소도가 중요한데 동일한 무기물 첨가조건에서 유사한 가소도를 갖게 하는데 필요한 량은 fluid들의 종류에 따라서 상당한 차이가 있었다. 특히 PDMS는 점도는 낮지만 분자량이 커서 많은 량이 첨가되어 기계적 특성저하가 크게 일어났다. 코로나 처리후 발수성 회복특성은 fluid들의 분자크기와 반응기의 종류에 따라 상당히 영향을 받았으며 분자가 클수록 초기회복속도는 다소 느려도 최종의 상시발수성은 다소 높게 유지되었으며 2일 이내에 거의 초기 접촉각으로 회복되었다. 내아크성은 무게손실이 적을수록 오차범위도 작은 안정된 특성을 보였으며 fluid들의 종류에 따른 무게손실의 차이는 크지 않았다. 트래킹 방전에 의한 무게 감소는 fluid의 분자가 크면서 페닐기를 가진 fluid들이 첨가된 고무가 우수한 특성을 보였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.69-75
• /
• 2009

This paper studies the aerodynamic performance that the vent mixer-new conceptual supersonic mixer-showed with its geometric characteristics. The hole is 2 mm with 2 mm's distance from the wall in case 1 and with no distance in case 2. In case 3 die hole is 1 mm. Case 1 and case 2 showed the same total pressure recovery ratio, of which the case 3 was lower than that. While cases 1-3 had the same reattachment length, the shear layer was thicker in cases 1 and 2 than in case 3. Within the recirculation zone, cases 1 and 2 had lower pressure loss and higher velocity gradient difference than case 3-they enhance mixing between air and fuel. Separation bubble which is developed by the inflow into the recirculation zone has a significant effect on the total pressure recovery ratio in the combustor. Also separation bubble influences pressure distributions and recirculation flows in the recirculation zone. Therefore, inflow rate of air into the recirculation zone mainly affects the performance of vent mixer.

• Applied Microscopy
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2002

To confirm the effect of electroacupuncture on the regeneration of injured peripheral nerve, the change of evoked potential in the sciatic nerve, the change of enzyme activity in the spinal cord, and morphological change of injured sciatic nerve were examined comparatively in acupuncture group (AG) and control group (CG) after sciatic nerve of guinea pig was injured by purpose. The value of evoked potential after injury of the sciatic nerve was increased in both AG and CG, but the increase rate of that was higher in AG than CG. Acid phosphatase activity of the spinal cord was increased in 1CG and 2AG, but shown are tendency to return to the normal state as time went by. Ultrastructural recovering rate of the injured sciatic nerve was higher in AG than CG. Also, there was developed only adipose tissue in sciatic nerve of AG. As mentioned above, the effect of electroacupuncture on the regeneration of injured peripheral nerve was confirmed experimentally by change of evoked potential, acid phosphatase and ultrastructure. Especially, the effect of electroacupuncture was appeared clearly in an early stage than other treatment stages.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1442-1444
• /
• 2003

폴리머 애자용 shed 재료의 전기방전에 대한 열화내성과 표면이 오염된 조건하에서도 우수한 발수성 유지는 제품의 장기성능에 있어서 가장 중요한 인자들이다. 내트래킹성 확보를 위한 보강재로는 ATH가 주로 사용되고 있으며 ATH의 첨가량이 많을 수록 내트래킹성은 대체로 향상되는 것으로 되어 있다. 그러나 애자 제조시 무결점 성형성의 만족이 대단히 중요하기 때문에 ATH를 고충진하는 경우 사용하는 process oil들의 종류 및 첨가량을 고려한 ATH 첨가량의 최적화는 필요하다. 본 논문에서는 ATH를 170 part로 다량으로 첨가하면서 화학적 구조와 점도가 다른 몇 가지 실리콘 fliud들을 사용하여 무결점 성형에 적합한 가소도를 갖는 컴파운드를 제조하여 기본물성과 초고압 옥외절연물의 shed 재료로서 장기성능에 영향을 주는 방전열화내성과 표면발수성의 회복특성을 평가하였다. 컴파운드의 성형작업성과 관련이 큰 가소도는 fluid 점도에 따라 상당한 차이를 보이므로 실리콘 fluid 종류의 선택과 첨가량의 최적화에는 성형작업성, 발수성 회복특성, 열화내성 등의 고려가 필요하다. 무결점 애자성형을 위한 진공 사출에서 고무 컴파운드의 가소도가 중요한데 동일한 ATH첨가조건에서 일정한 가소도를 갖게 하는데 필요한 양은 fluid들의 종류에 따라서 상당한 차이가 있었다. 코로나 처리후 발수성 회복특성은 fluid들의 분자크기와 반응기의 종류에 따라 상당히 영향을 받았으며 분자가 클수록 초기회복속도는 다소 느렸지만 평상시에 늘 유지되는 상시발수성은 다소 높게 유지되었다. 아크와 트래킹 방전에 의한 무게 감소는 ATH가 과량으로 첨가되어 상당히 적었으며 fluid의 분자가 크면서 페닐기를 가진 fluid들이 첨가된 고무가 우수한 특성을 보였다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.38-38
• /
• 2022

동해안 지역에서 발생되는 대형 산불의 원인은 건조주의보, 영동지역에서 불어오는 강한 바람, 소나무의 단순림, 임도 유무와 상태 등을 들고 있다. 조사 대상지인 삼척 검봉산 일대는 기존 소나무가 우점하는 곳으로 2001년 복원을 위해 소나무, 곰솔, 굴참나무 등을 조림하였고, 일부는 자연복원을 하였다. 복원 이후 21년 지난 현재 삼척 검봉산 일대 산불피해 복원지역의 식생은 크게 굴참나무-소나무군락, 소나무신갈나무군락, 곰솔-소나무군락으로 나누어지는 것으로 나타났다. 산불피해지 식생 회복은 굴참나무, 소나무, 곰솔 등 조림으로 현재 식생은 산불 발생 이전의 임상으로 회복되고 있다. 특히, 산불의 유형 중 지표화 피해지역은 하층 식생의 피해가 크다. 기존의 소나무는 결실된 종자를 비산하여 치수를 발생시켜 자연복원의 속도를 높이고 굴참나무를 활용한 인공복원은 맹아를 발달시켜 본인의 영역을 확장하는 전략을 지니고 있다. 단, 입지적 환경이 동일하다는 전제 조건에서 숲에서 재생 기작이 진행되는 자연복원보다는 인공복원이 회복시간과 종다양성이 높은 측면에서는 효과적인 것으로 결론을 지을 수 있다. 식생군락을 분류한 결과 굴참나무-소나무군락, 소나무-신갈나무군락, 곰솔소나무군락으로 3개 군락으로 나누어졌다. 인공복원지에 식재한 굴참나무, 소나무, 곰솔은 복원 이후 지속적으로 해당지역의 식생이 우점종으로 자생하고 있는 것으로 나타났으나, 소나무-신갈나무군락의 경우 참나무과 식물인 신갈나무와 굴참나무, 졸참나무가 교목층과 아교목층에 자연유입되고 있어 향후 신갈나무가 우점하는 활엽수림으로 천이 될 것으로 예상된다. 군락의 종다양도지수는 낙엽활엽수가 우점하는 굴참나무-소나무군락이 가장 높게 나타났으며, 침엽수림인 곰솔소나무군락이 가장 낮게 나타났다. 산불피해지 식생은 조림수종에 영향을 크게 받으며, 21년이 지난 현재 산불 이전 임상으로 회복되는 경향을 나타내었다. 향후, 효과적인 복원을 위한 DB구축 및 모니터링자료 마련을 위해 산불피해지에 대한 지속적인 식생조사를 통한 자료구축이 필요하다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.3
• /
• pp.257-265
• /
• 1999

To investigate the sequential changes in microvascular architecture and osseous regeneration during the bony healing after an application of the guided tissue regeneration method, we made artificial defects measuring $0.7cm{\times}0.3cm$ in size on femoral bones of rats measuring about 200gm and applied non-absorbable TEFE membrane at experimental sites but not at control sites. Then we observed the sequential changes and correlations between new vacuolation and bony regeneration using microvascular corrosion cast method and routine light microscopic observation at 1, 2 and 3 weeks after operation, respectively. The results showed that there were close relationships between regeneration of microvasculature and bone. In early phase, the invasion of granulation tissue at control sites delayed bony regeneration, however, in later phase, there was no remarkable differences in bony regeneration between control and experimental sites. The placement of barrier also affected in revascularization of regenerating bony defects. This is, the experimental sites showed parallel arranged nutritional vessels along long axis with well developed retiform plexus whereas the control revealed vertical invasion of microvasculature from outside of marrow space through bony defects which was also rearrange with time into parallel pattern with a vertical plexus but lesser organized than that of experimental sites. These findings suggest that the reconstruction of regenerating vasculature within the marrow cavity only may be sufficient and/or more be efficient in regeneration of bony defects.

• Asian Journal of Turfgrass Science
• /
• v.26 no.2
• /
• pp.135-139
• /
• 2012

Creeping bentgrass (Agrostis stolonifera) is one of the most popular turfgrasses for high-quality playing surface such as putting green on golf courses and athletic fields. Continues damage such as divot injury on creeping bentgrass is major issue to maintain golf course properly. Although plentiful researches to maximize divot resistance have been reported, minimal research has focused on relation between nitrogen (N) sources and divot resistance. The study was conducted to determine the effect of N source for turfgrass divot recovery and overall tee performance. Eleven fertilizer treatments as N sources were applied to creeping bentgrass 'Penncross'. Before the first application, divot injuries were simulated by removing a core of soil and turfgrass from established plots and backfilling with native soil. Data collection included turfgrass color and quality. N release speed did not influenced divot recovery. Frequency of urea application had no effects on divot recovery. Urea with split application had no difference with no treatment for divot recovery. Polyon product especially polyon mini (41-0-0) had the best performance for divot recovery and for maintaining better turfgrass quality. Overall, small particle size of slow-release N form would influence creeping bentgrasss to recover divot damage.

• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.719-726
• /
• 2016

The effect of high and low temperatures on seedling quality while raising of paprika (Capsicum annuum L.) seedlings, and their early development after planting was investigated. The control raising seedling temperature (RST) was $23^{\circ}C$; high temperature, $31^{\circ}C$; and low temperature, $15^{\circ}C$ throughout the raising seedling period. At $15^{\circ}C$ and $30^{\circ}C$, plant height, stem diameter, fresh weight, dry weight, number of leaves, and seedling leaf area were significantly lower than those at $23^{\circ}C$. At 4 weeks after planting, seedling's growth characteristics showed a similar pattern. Compared to $23^{\circ}C$, seedlings raised at $15^{\circ}C$ and $30^{\circ}C$ had an increased dry weight and leaf area per unit time after planting than during the seedling raising period. At 4 weeks after planting, crop growth rate and leaf area index were unaffected by RST, and relative growth rate and net assimilation rate at RSTs of $15^{\circ}C$ and $31^{\circ}C$ were higher than those those at RST of $23^{\circ}C$. At an RST of $15^{\circ}C$, growth speed and net assimilation rates were higher after planting than before planting, according to increased photosynthetic rate. Thus, high and low temperatures during the seedling raising period significantly reduced seedling growth and plant growth after planting. After planting, seedlings raised at $15^{\circ}C$ recovered more quickly than did those raised at $31^{\circ}C$.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.8
• /
• pp.5-15
• /
• 2015

One-dimensional rainfall laboratory tests using gneissic weathered soil were conducted to investigate effect of antecedent rainfall on infiltration characteristics. Experimental results using samples from Chuncheon and Chungju sites showed that rainfall onto the ground surface decreased initial negative pore water pressure of unsaturated soils, which recovered gradually after the end of rainfall. Rainfall intensity increases water infiltration rate, and infiltration rate during main rainfall is faster than that of the preceding rainfall. It is considered that higher water saturation after antecedent rainfall increases water infiltration rate during main rainfall. In particular, Chungju sample with higher clay content had slower recovery of negative pore water pressure and infiltration rate. Numerical results using finite element slope stability analysis showed that reduction of initial negative pore pressure due to rainfall infiltration deteriorates slope stability, and diffusion of pore water pressure after the end of rainfall further reduces FS of the slope in the short term. Main rainfall after prior rainfall further reduced factor of safety of the unsaturated slope. Pattern of antecedent rainfall has a significant impact on the magnitude and distribution of initial pore water pressure in unsaturated soils which are controlling factor to assess factor of safety of unsaturated slope during rainfall.