• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.66-72
• /
• 1994

For the reliable prediction of maneuverability of a ship, lots of captive model tests have been carried out for over 10 years. But the parameters appearing in the mathematical model are so versatile and showing complex characteristics, and it is still hard to establish the useful formulae that we can adopt directly in the design stage. In this paper, the most important parameters in the mathematical model. i.e.($1-\omega_P$) the effective wake fraction at propeller, and $\delta_R(\beta_R)$), the effective rudder inflow angles are investigated by the captive model tests at the circulating water channel. The model is tested at designed speed and at low speed, and the drafts at both full load and ballast load conditions are taken. Propeller thrusts and rudder normal forces are measured at the given drift angle and propeller revolution. These forces are used for the analysis of the effective flow velocity or flow direction, to the propeller or rudder.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.601-608
• /
• 2019

In this study, the effect of hull appendages on the high-speed catamarans with reverse bow shapes is compared and analyzed by numerical analysis and circulating water tank model test. The reverse bow shape showed an improved wave shape by shifting the generation position of forward divergent wave to the stern direction and was effective in resistance and stable running posture (Kim et al., 2019). In the model test results of the running performance as the wave patterns and the change of the running posture due to the fin fitted with the inner side of the inverted bow and the interceptor, 1) Trim characteristics of the inverted bow 2) Improvement of superposition of inner wave by Fin 3) The trim control by the fin and the interceptor is considered to be effective in reducing the impact of the two hull connection decks (wetdeck).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.2
• /
• pp.73-88
• /
• 2000

A series of analysis and experiment on the fishing gear and method of the existing midwater pair trawl net with 12,800mm of maximum mesh size is carried out to determine the most effective shape factor. As the first step of this study, the fishing gear and method for the existing net are analyzed to solve problems, such as being low of the net height by increasing the towing speed, twist of net pendant and twine, suspension of float between knots of mesh. etc. Standing on these results, the existing net are modified by very effective shape based on the theory and technology designing the fishing gear. Also, the model experiment is carried out to determine the most effective shape factor of the modified net in the circulation water channel. The obtained results can be summarized as follows : 1. On the length of net pendants(No.2 and No.3) connected with side line, opening efficiency of net with length 8.0cm of net pendant is the greatest and in the order of 11.5cm, 15.0cm. 2. On the number of the net pendant, opening efficiency of net with 4 lines of net pendant is the greatest and in the order of 3 lines, 2 lines. Center part of side panel is pushed out backward, and the pushed length is increasing by increasing flow speed. 3. On the sinking force, opening efficiency of the net is increasing by increasing sinking force. And opening efficiency shows almost the same when sinking force is greater about 1.5 times than that of the existing net in case of the net with 3 lines of net pendant, and about 1.6 ~ 1.7 times than that of the existing net in case of the net with 2 lines.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.45-51
• /
• 2001

In order to investigate the optimal design weight of sinkers for preventing cage net from deforming in current, the model experiment on 2 types of square cage nets with different S sub(n)/S, the ratio of total area of netting projected to the perpendicular to the water flow S sub(n) to wall area of netting S, and 4 kinds of sinkers was carried out in circulation water channel. The model cage nets were made in 1/10 scale and the total weight in water of 4 sinkers attached to each corner of their bottom frames was 18, 54, 90, and 126g, respectively equivalent to 0.1, 0.3, 0.5, and 0.7 kg per unit area of prototype net. The results obtained can be summarizes as follows; Due to the deformation of each net where it was lifted towards the surface in severe conditions, its volume was reduced. This depended highly on the weight of sinkers placed in the bottom corner of cage nets, even if the variation of S sub(n)/S had a little effect on their deformation in current less than 0.4 m/s. In addition, it was observed that the total weight of sinkers for preventing the net from deforming to the extent of less than 50% inside its initial volume was 31 to 245 kg in the range of 0.3 to 0.6 m/s and the adequate design weight of sinker was approximately 0.5 kg per its unit area.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.43-57
• /
• 2002

This paper introduces an analysis method to predicting the flow characteristic of flow field around otter board In order to develope a high performance model. In this experiment, it is used a numerical analysis of flow field through CFD(Computational Fluid Dynamic), PIV method in which quantitative, qualitative evaluation is possible. In this experiment, it is used PIV method with flow filed image around otter board in order to analysis of flow characteristic. The result compared flow pattern with analysis result through CFD and also measurement result of lift and drag force coefficient carried out in CWC(Circulating Water Channel). The numerical analysis result is matched well with experiment result of PIV in the research and it is able to verify In the physical aspect. The result is as follows ; (1) It was carried out visibility experiment using laser light sheet, and picture analysis through PIV method in order to analysis fluid field of otter-board. As a result, the tendency of qualitative fluid movement only through the fluid particle's flow could be known. (2) Since PIV analysis result is quantitative, this can be seen in velocity vector distributions, instantaneous streamline contour, and average vorticity distributions through various post processing method. As a result, the change of flow field could be confirmed. (3) At angle of attack 24$^{\circ}$ where It Is shown maximum spreading force coefficient, the analysis result of CFD and PIV had very similar flow pattern. In both case, at the otter-board post edge a little boundary layer separation was seen, but, generally they had a good flow (4) As the result of post processing with velocity vector distributions, instantaneous streamline contour and average vorticity distributions by PIV, boundary layer separation phenomenon started to happen from angle of attack 24$^{\circ}$, and from over angle of attack 28$^{\circ}$, it happen at leading edge side with the width enlarged.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.340-349
• /
• 1995

There are several problems in a fishing by the midwater pair trawl net which is used in Denmark; steeply decreasing of the net height with the towing speed increasing, the larger volume of the fishing gear in comparison with the size of the trawler, and catching of a float in a mesh, etc. To prevent steeply decreasing of the net height with the towing speed increasing and catching of a float in a mesh, it is sometimes more useful to use the kite instead of floats. This paper describes the hydrodynamic drag and the opening efficiency of the midwater pair trawl net and the midwater kite pair trawl net obtained by the model test in the circulation water channel. The results can be summarized as follows; 1. The hydrodynamic drag of the midwater kite pair trawl net is about 0.7 times smaller than that of the midwater pair trawl net. 2. The net height, mouth area and filtering volume of the midwater kite pair trawl net are smaller then those of the midwater pair trawl net when the towing speed is below 2.5knots, almost the same at 2.7knots, and are larger over 3.0knots. The net width of the midwater kite pair trawl net is same as that of the midwater pair trawl net. 3. The shapes of net mouth of both net are an oval steeply flatted with the towing speed increasing. The filtering volume of the midwater kite pair trawl net is larger then that of the midwater pair trawl net by 3% at 3.0knots, 11% at 4.0knots, and 16% at 5.0knots respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.15 no.1
• /
• pp.5-16
• /
• 1979

At the holding of live anchovies which will be used as bait for the skipjack fishing, it is necessary to transrer the holding creel to the holding ground from the long distanted fishing ground. Usually, the creel made with net webbing and shaped like pound, was towed with a tow rope fastened to the front fringe or it, when two serious problems were found. The one was that the leading flap or the webbing of creel was drifted backward by the drag and caused to decrease the volume of the creel and made anchovies mortal. The other was that much time were spent to tow creels for long distance with slow speed, whereas to tow fast made anchovies worn out and caused them mortal. To prevent these defect, the authors carried out a model experiment in a circular flowing tank with a 1/15 scale model creel by four different arrangement of towing, and found out two suitable method, then these two methods were experimented in the sea with full rigged creel, and found the most suitable method out. To decrease the interior current speed of the creel even if it was towed fast, the apron which made by the same webbing of the creel body was enclosed the leading flap of creel, when the interior current speed showed the 35 to 40 percent of towing speed, whereas it showed 50 to 55 percent without apron.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.3
• /
• pp.234-240
• /
• 2002

The static stability of the otter board in relation to the angle of attack ($\alpha$) was studied analytically and experimentally from the moments of tensions and hydrodynamic force acting on it. Three flat plates of 0.5, 1.0, and 1.5 aspect ratios (λ) and four cambered plates of 5, 10, 15, and 20% camber ratios (CR) with the same aspect ratio (λ=1.5) were tested in a circulating water tank for measuring the hydrodynamic forces and moments relevant to the position of hydrodynamic center. And, center-of-pressure coefficients ($C_p$) and moment coefficients ($C_M$) of each plate as a function of the angle of attack were calculated for estimating the static stability from hydrodynamic forces. The obtained results are summarized as follows ； 1． When the angle of attack for otter board is changed from equilibrium for some reason, moments depending upon tensions of warp and sweep line always act in order to have the static stability, respectively. 2. Position of center-of-pressure of each flat plate moves from leading edge to center of plate with the increase of the angle of attack. It means that the moment of hydrodynamic force acting on flat plates also increases the static stability of plate. 3. With the increase of the angle of attack for cambered plates, the positions of center of-pressure move from trailing to leading edge, and then turn toward center of plate. As the camber ratios increase, the ranges of the angle of attack of the static un stability depending on moment of hydrodynamic force become wide.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.795-801
• /
• 2019

The aim of this study was to investigate the possibility of the skin-friction reduction by vortex control. A vortical system such as a horseshoe vortex, a hairpin vortex, and a wake region was induced around a hemisphere attached on a Perspex flat plate in the circulating water channel. Hairpin vortices were developed from the wake region and horseshoe vortices were formed by an adverse pressure gradient in front of the hemisphere. The horseshoe vortices located on the flank of the hemisphere induced a high momentum flow in the wake region by the direction of their vorticity. This process increased the frequency of the hairpin vortices as well as the frictional drag on the surface of the wake region. To reduce the skin-friction drag, suction control in front of the hemisphere was applied through a hole. Flow visualization was performed to optimize the free-stream velocity, size of the hemisphere, and size of the suction hole. Once the wall suction control mitigated the strength of the horseshoe vortex, the energy supplied to the wake region was reduced, causing the frequency of the hairpin vortex generation to decrease by 36.4 %. In addition, the change in the skin-friction drag, which was measured with a dynamometer connected to a plate in the wake region, also decreased by 2.3 %.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.274-282
• /
• 1998

This study deals with sinking resistance for purse seine, in the case of different d/l, ratio of twine diameter and leg length. Experiments carried out on the six types simplified reduced model seines which were made of knotless netting. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two -ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cm for seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. Experiments were measured in the observation channel of a flume tank at the static conditions Sinking motion was recorded by the two sets TV-camera for VTR which were placed in top and side of the model seine, and reading coordinate carried out by the video digitization system. An analysis were calculated out by simultaneous differential equations for numerical method by Runge - Kutta - Gill sub - routine. The results obtained were as follows: 1. Average sinking speed of seine of seine margin was fastest for Ⅵ seine followed by V, IV, III, II and I seines. 2. The coefficient of resistance for a seine wall was depended upon the ratio of d/l : KD =0.081 (d/l )-0.5 3. The coefficient of resistance for netting bundle was not depended upon the ratio of d/l :CR = 0.91 (), d : Twine diameter, l : Leg length, : Density of netting materals, $\omega$ : Density of water