• 제목/요약/키워드: 회로소음

검색결과 93건 처리시간 0.02초

발사시 야기되는 랜덤진동을 고려한 위성체 전장품 설계 및 검증에 대한 연구 (Design Consideration and Verification on Random Vibration of Satellite Electronic Equipment while Launching)

  • 김홍배;서현석
    • 소음진동
    • /
    • 제10권6호
    • /
    • pp.971-976
    • /
    • 2000
  • High level random vibration environments induced while launching of spacecraft can damage sensitive electronic equipment, unless the equipment is properly packaged. Thus careful consideration on the launch environment, especially for high level random vibration, is required in the design stage of electronic equipment of spacecraft. This paper describes the development process of Solar Array Regulator for KOMPAT-2, which is designed and tested by Korean engineers. Both analytical and experimental techniques are introduced in this paper.

  • PDF

Projector 회로 소음 및 진동 저감의 실험적 연구 (An Experimental Study on the Noise and Vibration reduction of Projector Driving Board)

  • 최영수;송근영;이종권;오홍렬;이승규
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2013년도 춘계학술대회 논문집
    • /
    • pp.135-140
    • /
    • 2013
  • This paper deals with noise reduction on a light source driving board in a projector. We analyze causes of noise/vibration in the circuit with the present increasing use of LD and LED driving boards. The main source of noise is the MLCC in the driving board. Our aim is to investigate how the mechanical arrangement of the circuit elements affects noise reduction. The result of our experiment shows that noise can be reduced by symmetrical arrangement and slots in PCB. This result is expected to facilitate a variety of applications for manufactures without a need to change circuit elements.

  • PDF

발파소음의 예측기법과 환경규제 기준으로의 변환 연구 (A Study on the Prediction & Transformation of Blasting Noise for Environmental Regulation Standard)

  • 김남수;양형식
    • 화약ㆍ발파
    • /
    • 제18권2호
    • /
    • pp.14-22
    • /
    • 2000
  • 발파소음을 계측하여 예측방법의 타당성을 검토하였고, 환경규제 기준으로의 변환방식을 규명하였다. 환산거리에 따른 발파소음의 예측은 환산거리와 음압레벨의 상관성이 더 좋았으나, 상관계수가 낮아서 환산거리 설계 의한 발파소음의 조절은 어려움이 있었다. 발파시 동시에 측정된 음압레벨과 소음레벨의 상관식에 의한 변환과, 음압레벨의 우세주파수에 해당하는 청감보정회로의 보정치만큼 간이 보정하여 변환하는 방법과, 퓨리에 변환을 하여 청감보정한 후 소음레벨을 구하는 방법을 시도하였다. 세 가지 방법 모두 변환하는 데에는 많은 오차가 발생하였으나 우세주파수, FFT를 이용한 변환보다는 발파시 동시에 측정된 음압레벨과 소음레벨의 상관식에 의한 변환 방법이 가장 실용적인 방법이었다.

  • PDF

수동과 능동방식을 혼용한 폐공간에서 소음감쇠 (Noise Reduction using Passive and Active Noise Control in the Closed Area)

  • 조병모
    • 전기전자학회논문지
    • /
    • 제5권1호
    • /
    • pp.16-23
    • /
    • 2001
  • 수동적인 소음 감쇠는 산업현장에서 발생되는 소음을 감소시키기 위해서 주로 사용된 방법이다. 그리고 능동적인 소음 감쇠방법은 수동적인 소음 감쇠방법에 비해 많은 이점을 가지고 있다. 능동적인 소음 감쇠 시스템은 낮은 대역의 주파수 영역에서 소음 감쇠 성능이 우수하며, 소형 경량으로 설계할 수 있는 이점이 있다. 본 논문에서는 능동적인 소음감쇠를 위한 간단한 궤환 루프 제어 시스템을 제안한다. 능동적인 궤환 제어 시스템은 위상 지연 보상과 반전 회로와 외부 소음을 수음할 수 있는 마이크로폰과 외부 소음을 줄이기 위해 위상이 반전된 소음을 발생시키는 스피커로 구성되어 있다. 그리고 소음감쇠 성능을 향상시키기 위해서 위상천이기를 사용하여 진폭 응답 곡선에서 최대가 되는 주파수에서 위상차가 $180^{\circ}$가 되도록 위상을 보정하여 소음을 제거했다. 능동소음제어에서 위상 지연이 $50^{\circ}$$310^{\circ}$ 사이에 존재하는 소음이 감소되는 경향이 있었으며, 소음은 헬멧 내에서 약 20[dB] 감쇠되는 결과를 얻었다.

  • PDF

비행체 탑재 회로카드 조립체의 내충격 향상을 위한 설계 (Design for improving the impact resistance of a vehicle equipped with the circuit card assembly)

  • 이창민;강동석;신영훈;이기선
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.48-53
    • /
    • 2014
  • Rocket, held using the CCA for the mission, a plurality of recording devices, and navigation equipment. In case of a projectile which is entered the water after fired into the air, after performing stages and fairing separated in flight to enter the underwater. It is caused by the explosion of gunpowder mainly, vibration phenomenon of a large transition is induced structurally very, also on entering the water, have a significant shock structurally separated. If shock is transmitted directly to the CCA through the body, it can be caused malfunction of payloads, resulting in failure of the mission of the projectile. In order to ensure the stability against shock, in this paper, Calculating a target resonacne frequency of the CCA, and verified through modal test and analysis. Maximum acceleration position of CCA is checked by SRS analysis. In addition, effectiveness of shock isolation system through shock analysis.

  • PDF

등가 회로 모델을 이용한 압전 진동 에너지 수확 장치의 해석 (Analysis of Vibration-powered Piezoelectric Energy Harvesters by Using Equivalent Circuit Models)

  • 김재은
    • 한국소음진동공학회논문집
    • /
    • 제20권4호
    • /
    • pp.397-404
    • /
    • 2010
  • The use of equivalent circuit models of piezoelectric energy harvesters is inevitable when power circuitry including rectifying and smoothing circuit elements is connected to them for evaluating DC electrical outputs. This is because it is difficult to incorporate the electro-mechanical coupling resulting from the additional circuitry into the conventional finite element analysis. Motivated by this observation, we propose a method to accurately extract the equivalent circuit parameters by using commercially available FEM software such as ANSYS which provides three-dimensional AC piezoelectric analysis. Then the equivalent circuit can be analyzed by circuit simulators such as $SimPowerSystems^{TM}$ of MATLAB. While the previous works have estimated the circuit parameters by experimental measurements or by analytical solutions developed only for limited geometries and boundary conditions, the proposed method has no such limitation because piezoelectric energy harvesters of any shapes and boundary conditions can be treated in FEM software. For the verification of the proposed method, multi-modal AC electrical power output by using a corresponding equivalent circuit is compared with that by ANSYS. The proposed method is then shown to be very useful in the subsequent evaluation of DC electrical output which is obtained by attaching a bridge diode and a storage capacitor to a piezoelectric energy harvester.

자동차 부품 고장 진단에 관한 연구

  • 오재웅;한창수;이호택;신준;모종운;국두윤
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2001년도 추계학술대회 논문집
    • /
    • pp.144-148
    • /
    • 2001
  • 자동차의 발전과 함께 유지 보수를 위한 사용자의 요구는 급증하고 있으나 정비사의 부족으로 인해 경제성 및 신속성 등 이 문제가 되고 있고 이를 해결하기 위해 현재 개발되고 있는 장치들은 대부분 전자 제어 유닛에서 발생시키는 신호를 분석하거나 운전자와의 대화를 통하여 진단하는 방식으로 고장으로 인한 소음이나 진동등 운전자들의 주관적인 평가대상에 대해서는 적절한 해결책으로 제시해 주지 못하고 있다. 그러므로 계측에 의한 소음과 진동 데이터를 이용하여 전문가의 판단을 가지고 고장의 원인을 규명하며 운전자를 위한 오디오적인 표현을 해 줄 수 있는 진단 전문가 시스템이 필요하게 되었다. 본 논문에서는 자동차의 여러 단품중 쇼크 옵서버와 에어컨에 대하여 소음 진동 현상의 정상 및 이상 증상과 신호 계측 방법을 연구하였고 계측된 신호에 대해 패턴 화하여 인공 신경 회로망과 퍼지 추론을 통한 진단을 할 수 있는 알고리즘을 개발하였으며 차후 계속되는 연구에 사용될 정상 및 이상신호에 대한 기본적인 데이터 베이스를 구축하였다.

압전션트 회로를 이용한 지능패널의 광대역 소음저감에 관한 연구 (Broadband Noise Reduction of Smart Panels using Piezoelectric Shunt Circuits)

  • 정영채;김재환;이중근;하성호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 추계학술대회논문집
    • /
    • pp.624-629
    • /
    • 2003
  • In this paper, broadband shunt technique for increasing transmission loss is experimentally investigated. Piezoelectric shunt damping is studied using resonant shunt circuit and negative capacitor shunt circuit. A resonant shunt circuit is implemented by using a resistor and inductor. Negative Capacitor shunt damping is similar in nature to resonant shunt damping techniques, as a single piezoelectric material is used to dampen multi-mode. Performance of both methods is experimentally studied for noise reduction. This is based upon SAE J1400 test method and a transmission loss measurement system is provided for it. This paper will present the test setup fer transmission loss measurement and the tuning procedure of shunt circuits. Finally the results of sound transmission tests will be shown.

  • PDF

파형 정합에 의한 초음파센서의 거리 측정 (Distance Measurement of Ultrasonic Sensor-based on Waveform Matching)

  • 신창완;김봉수;김종만;김형석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 G
    • /
    • pp.3227-3229
    • /
    • 1999
  • 수신된 초음파 파형이 표준 파형과 정합되는 시간을 수신 시점으로 사용함으로써 정확한 거리측정을 가능하게 하는 초음파 센서 거리계의 성능 개선을 제안하였다. 근거리 측정용으로 많이 사용되는 초음파센서는 다른 거리측정 시스템에 비해 하드웨어 구현이 용이하고 가격이 저렴한 장점이 있으나 센서 수신부측 Limit 회로의 threshold level의 선택 문제에 따른 거리 측정의 오차와 소음에 의한 거리 측정 오차가 매우 큰 문제가 되고 있다. 본 논문에서는 수신된 초음파 파형에 표준 파형을 정합하여 최대의 정합값을 가지는 시점을 수신 시간으로 간주하여, 소음환경비서도 거리 측정이 가능한 파형 정합 방법을 제한하였다. 본 논문의 실험을 통하여, 잡음이 심한 소음환경에서도 제안한 파형 정합 방법이 Threshold 방법 보다 초음파센서 거리 측정 성능이 개선됨을 확인할 수 있었다.

  • PDF

집단보호장비 내의 회로카드조립체 고장 원인 분석 및 품질 향상 (Analysis of Causes PCB Failure for Collective Protection Equipment and Improvement of Quality)

  • 박세진;기상식
    • 한국산학기술학회논문지
    • /
    • 제20권5호
    • /
    • pp.87-92
    • /
    • 2019
  • 본 논문은 집단보호장비에 들어가는 회로카드조립체의 고장 원인 분석 및 품질 개선에 관한 연구이다. 해당 장비는 현재 운용중인 무기체계의 구성품으로 냉난방 기능뿐만 아니라, 화생 방어 역할을 한다. 그런데 군에서 운용중에 응축부조립체의 팬이 동작하지 않는 현상이 다수 발생되었다. 이에 따라 고장 원인을 분석하였고 특정 회로카드조립체가 소손됨을 확인하였다. 고온의 환경조건에서 지속적인 냉방가동에 따라 부품이 가열되고 이에 따라 고온에 노출된 전자부품이 열화되어 소손됨을 알 수 있었다. 따라서 본 논문은 이를 해결하기 위해 방열판을 적용하여 과온 동작에 의한 고장빈도를 낮추고 회로카드조립체의 수명을 연장한 품질 개선에 관한 연구이다. 개선된 회로카드조립체는 실험을 통해 방열성능을 확인하였다. 뿐만 아니라 체계 호환성 검사, 양압유지, 소음 시험, 작동시험 등을 통해 성능검사를 마쳤으며 현재 개선된 제품을 적용중이다. 이번 개선을 통해 현재까지 해당 회로카드조립체에서 발생한 고장은 없으며 해당 장비의 품질이 향상됨을 확인하였다.