• Journal of the Mineralogical Society of Korea
• /
• v.23 no.3
• /
• pp.243-250
• /
• 2010

Froth flotation of complex copper ore from Indonesia Jambi mine has been carried out to produce high-grade Cu concentrate. Since the ore contained minor Cu sulfides in addition to major Cu carbonate (malachite), copper concentrate was recovered by two-stage process of flotation, which consisted of copper sulfide flotation using xanthate followed by copper oxide flotation using oleic acid. The copper sulfide concentrate of 57.5% Cu grade with 9.5% recovery was obtained by copper sulfide flotation under conditions of 300 g/t collector (1 : 1 mixture of xanthate series Aero Promoter 211 and Aero Promoter 242) and pH 6.0 pulp. In subsequent copper oxide flotation on sink products, the concentrate of 30.8% Cu grade with 92.1% recovery was obtained under the conditions of oleic acid 300 g/t, AF65 50 g/t, pH 8.0 and 2 times cleaning. The flotation techniques which can achieve a Cu grade of 36.1% and a recovery of 92.1% have been developed from the two-stage process of flotation.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1996.04a
• /
• pp.87-87
• /
• 1996

상기도 점막의 분비세포와 이로부터 분비되는 점액은 각 부위에 따라 형태학적, 기능적 특성이 다르다. 특히 후두의 성대부위는 발성시 고속의 마찰진동이 있게 되어 성대상피를 보호하기 위한 윤활제 역할의 점액이 필요하다. 점탄성과 밀접한 연관이 있는 점액당단백질 분비세포의 조성비율과 밀도를 알기 위해서 개 10마리의 후두, 기관, 상악동, 비강점막을 채취하여 periodic acid-Schiff, alcian blue 1.0, alcian blue 2.5, high iron diamine-alcin blue염색을 하여 다음과 같은 결론을 얻었다. 1. 후두점막에서 선포의 밀도는 성문부의 후두실 상부에서 가장 높았다. 2. 후두점막에서 점액세포의 조성은 성문상부에서 가장 높았고, 장액세포의 조성은 성문부에서 가장 높았다. 3. 황화점액의 조성비는 성문부가 성문상부, 성문하부보다 유의하게 높았고, 후두의 세 부위와 기관에서 상악동과 비강보다 유의하게 높았다. 4. 타액점액의 조성비는 성문부에서 성문하부보다 유의하게 낮았으며, 성문부는 성문상부에 비해서도 통계적 유의성은 없었으나 낮은 경향을 보였다. 5. 상기도의 각 부위에서 당단백질의 조성비는 모든 부위에서 중성점액이 가장 높았고 산성점액중 성문부에서는 황화점액이 타액점액보다 유의하게 높았으며 성문하부, 상악동, 비강에서는 타액점액이 황화점액보다 유의하게 높았다. 이상의 결과에서 성문부에서 나타나는 높은 장액세포의 비율과 점액당단백질 조성의 특징이 성문부 점액의 성대운동에 대한 윤활작용에 적합한 생리적 역할을 담당하는 것으로 생각된다.

• Journal of the Korean institute of surface engineering
• /
• v.16 no.4
• /
• pp.160-172
• /
• 1983

티오요소류, 폴리에테르류, 염료와 같은 유기화합물이 첨가된 황산동 전기도금욕에서 석출된 구리의 광택, 평활력효과를 무첨가욕과 기존 광택제가 첨가된 도금욕에서와 각각 비교하여 이들 유기첨가제가 구리의 석출상태와 음극분극에 미치는 영향을 Hull cell 실험과 현미경관찰, 전기화학적 측정방법에 의해 고찰하였다. 황산동 전기도금욕에서 thiourea, 2-mercapto-2-imidazoline, 1-acetyl-2-thiourea와 같은 유기 황화합물은 비교적 고전류 밀도 범위에서 결정성장이 억제되고 입자가 미세한 구리석출을 일으켜 양호한 광택효과와 평활력을 가져오나, 특히 저전류밀도에서는 해로운 줄무늬가 발생한다는 점에서 많은 개선의 여지가 필요하다. 그러나 이들 유기 황화합물에 1,3-dioxolane polymer와 소량의 염소 이온을 혼합 첨가할 것 같으며 넓은 전류밀도 범위에서 양호한 광택과 평활력이 있는 동석출을 얻을 수 있었다.

• Journal of Conservation Science
• /
• v.33 no.3
• /
• pp.167-179
• /
• 2017

In this study, Sangpyeontongbo excavated at Bigyeongdo, Seosan, were investigated to determine the components of the corrosion products that were formed while they were buried underwater in an anaerobic environment. The causes of corrosion product formation were also determined. Microstructure observation, element mapping, principle component analysis for each year, and the detection of corrosion products were carried out. Results indicate that the concretions of corrosion products on the surface are needle-, hexahedral-, and octahedral-shaped; Pb, Cu, and S were among the elements detected. The Cu-S layer was clearly verified using element mapping. An analysis of major elements for each layer showed that Cu, S, and Pb were present and that most Zn was eliminated. The corrosion products detected were $PbCO_3$ (concretion) and $Cu_{1.96}S$ (metal). Accordingly, the anaerobic corrosion properties of Sangpyeongtongbo are summarized as follows: dezincification, copper sulfide, and lead compound.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.31-36
• /
• 2008

In hydrogen production for fuel cell by reforming ADG, sulfur compounds, odorant in ADG, are detrimental to reforming catalyst and fuel cell electrodes. We prepared alkali metal impregnated activated carbon to remove sulfur compounds in ADG by adsorption. The sulfur breakthrough adsorption capacity was changed depending on the oxygen concentration and relative humidity. Oxygen 0.2 vol% and RH 90% showed the highest sulfur breakthrough capacity. Adsorption characteristics of $H_2S$ on KI impregnated activated carbon were evaluated using dynamic adsorption method in a fixed bed. Based on the results, adsorption tower was designed and field-tested.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.321-325
• /
• 2016

본 연구에서는 제일 원리 분자 동역학(AIMD, ab-initio Molecular Dynamics) 방법을 이용하여 다양한 크기의 황화 이온 격자 구조에서 리튬 이온의 이온 전도도에 대하여 연구했다. 주어진 격자 구조내에 리튬 이온의 량이 증가할수록 확산도(D, diffusivity)는 감소하는 경향을 보였이지만, 리튬 이온의 농도는 증가 하기 때문에 특정한 농도에서 이온 전도도는 최댓값을 나타냈다. 또한 격자 구조의 부피를 증가 시킬 경우에 리튬 이온의 농도는 감소하지만, 확산도가 증가하여 전체적인 이온 전도도는 증가하는 것을 확인하였다. 본 연구 결과는 격자 구조내 이온의 이동에 대한 이해를 높이고 보다 효과적인 새로운 이온 전도체 개발에 도움이 될것이다.

• Economic and Environmental Geology
• /
• v.31 no.3
• /
• pp.171-183
• /
• 1998

Early Tertiary volcanics, volcanoclastics and granodiorite occur in the Barton Peninsula, King George Island, Antarctica. In the granodioritic stock and volcanic rocks, propylitic alteration characterized by actinolite, epidote, chlorite and calcite is widespread, and disseminations and veinlets of sulfide minerals such as pyrite, chalcopyrite and bornite are ubiquitious. The study on the hydrothermal alteration near granodioritic stock can be summarized as follows; (1) granodiorite intrusion is a small, high level stock associated with calc-alkaline volcanism, and have high copper content, (2) high temperature type of propylitic alteration and common occurrence of copper sulfides in and around granodiorite intrusion, (3) low ${\delta}^{34}S$ values of pyrites by oxidational conditions of sulfide deposition, (4) low ${\delta}^{34}S$ values of quartz and feldspar in the granodiorite, and isotopic non-equilibrium by hydrothermal alteration. It suggest that hyrothermal alteration and mineralization near granodioritc stock should be genetically related to granodiorite intrusion in the Barton Peninsula.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.13-29
• /
• 2016

In this study, we analyzed the causes of major faults in the biogas plant through the case of gas engine failure when cogenerating electricity and heat using biogas as a fuel in the actual sewage treatment plant and suggested countermeasures. Hydrogen sulfide in the biogas entering the biogas engine and water caused by intermittent malfunction of the water removal system caused intercooler corrosion in the biogas engine. In addition, the siloxane in the biogas forms a silicate compound with silicon dioxide, which causes scratches and wear of the piston surface and the inner wall of the cylinder liner. The substances attached to the combustion chamber and the exhaust system were analyzed to be combined with hydrogen sulfide and other impurities. It is believed that hydrogen sulfide was supplied to the desulfurization plant for a long period of time because of the high content of hydrogen sulfide (more than 50ppm) in the biogas and the hydrogen sulfide was introduced into the engine due to the decrease of the removal efficiency due to the breakthrough point of the activated carbon in the desulfurization plant. In addition, the hydrogen sulfide degrades the function of the activated carbon for siloxane removal of the adsorption column, which is considered to be caused by the introduction of unremoved siloxane waste into the engine, resulting in various types of engine failure. Therefore, hydrogen sulfide, siloxane, and water can be regarded as the main causes of the failure of the biogas engine. Among them, hydrogen sulfide reacts with other materials causing failure and can be regarded as a substance having a great influence on the pretreatment process. As a result, optimization of $H_2S$ removal method seems to be an essential measure for stable operation of the biogas engine.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.280-285
• /
• 2006

Adsorption characteristics of $H_{2}S$ on KOH impregnated activated carbon were evaluated using dynamic adsorption method in a fixed bed. The pore properties, including BET's specific surface area, pore volume, pore size distribution, and mean pore diameter of these KOH impregnated activated carbons, were characterized from $N_{2}$ adsorption/desorption isotherms. Adsorption equilibrium data were correlated with Langmuir and Freundlich isotherms. The adsorption of $H_{2}S$ onto the KOH impregnated activated carbon is better fitted by the Langmuir isotherm. An increase in the content of oxygen affects the performance of KOH impregnated activated carbon to the greatest extent.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.2
• /
• pp.45-51
• /
• 2001

Mackban-stone effectively removed heavy metals, such as Fe, Cu, Cd, and Zn, with best removal of Fe and Cu. And the removal of heavy merals related with ion exchange of Ca. Mackban-stone is also an efficient deodorant of hydrogen sulfide and ammonia and inhibited the growth of E coli. The degradation rare of 4-nitropheno1 by Nocardioides sp. PNP101 and 2,4-dinitrophenol by Strain CJ1 and Rhodococcus sp. DNP 505 are increased by Mackbane-srone.