• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1126-1128
• /
• 1992

The object of this study is the design of 3 phase on-board inverter. The key point in the inverter design is the selection of switching device, and its performance effects that of total system. In this study, six-step square wave inverter was designed using IGBT ( Insulated Gate Bipolar Transistor ) which has the advantages of MOSFET and bipolar transistor as switching device. The condition of being small and light which is the one of requirements for on-board equipment was accomplished by using IGBT module and optimising the snubber circuit, and the reliablity was increased. It is confirmed that the designed inverter satisfies the required performance through the performance and environment test.

• Journal of Institute of Convergence Technology
• /
• v.2 no.2
• /
• pp.59-65
• /
• 2012

This paper presents the study on applications of a surplus heat source. The heat is generated while hardwood charcoals are produced. We measure the temperature of the generated heat and analyze whether it can heat water or not. The analytic results show that the generated heat is useful as one of heat sources. In agricultural methods using a vinyl house, heating expenses will be saved by 10~20% when the surplus heat source is used.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.568-574
• /
• 2000

A new pulse multiplication technique based on 6-pulse thyristor converters is proposed in this paper. With the proposed technique, 12-pulse, 18-pulse and 24-pulse operations have been obtained both on the input current and on the output voltage. A control strategy over the whole range of phase angle is provided along with sophisticated input current and output voltage analysis. Experimental results from a laboratory prototype verify the proposed theory.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.3-6
• /
• 2018

최근 방대한 양의 스트림 데이터가 생산되면서 이를 실시간으로 처리하기 위한 프레임워크가 등장하였으며, 오픈 소스 영역에서 Spark Streaming이 주목받고 있다. Spark Streaming은 분산 환경에서 성능 향상을 위해 지연 스케줄링을 기반으로 응용을 수행하지만, 장애 발생 시 사용 가능한 태스크 슬롯을 빠르게 할당받지 못할 경우 장애 복구 시간이 지연될 수 있다는 문제점이 있다. 이러한 문제점을 해결하기 위해 본 논문에서는 실행자의 태스크 슬롯 보장을 통해 대기 시간 없이 즉시 할당할 수 있도록 하는 개선 메커니즘을 제안하였고, 실험 결과 장애 복구 응답성이 39.14% 개선됨을 확인하였다.

• Journal of Industrial Technology
• /
• v.32 no.A
• /
• pp.15-20
• /
• 2012

For emergency patients as heart disease, fast treatment is very important. This paper describes a smart phone software to detect emergency circumstance and request rescue. Detection of emergency condition of heart disease patients is based on physical motion and biological heart signals as electrocardiogram. Most smart phones have three axis acceleration sensor. On emergency condition, patients remain stationary. Thus the software detect stationary condition by using acceleration sensor data. For more precise detection, it combines electrocardiogram of patients. To request rescue, it sends help messages to designated persons. In addition, it generates emergency sound to surrounding people and plays a video of emergency measure that any person on the place can help the patient temporarily.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1091-1093
• /
• 1998

The BESS has a major advantages such as load leveling, quick response emergency power (spinning reserve), frequency and voltage control, improvement of reliability, and deferred generation and transmission capacity construction. However, the economic feasibility of these systems requires justification from the customer side of meter. In this paper, we proposed the economic evaluation model of BESS which is modified and complemented the SYSPLAN model[2]. In addition, we analyzed a economic evaluation from the economic measures such as payback period, overall benefit, ROI, and ROR.

• Journal of ILASS-Korea
• /
• v.9 no.4
• /
• pp.77-82
• /
• 2004

This paper describes the improvement of engine cooling system. To improve engine cooling performance, the authors approached in two ways. One is to increase water pump performance, changing of impeller shape and lightening of material were carried out. The second one is cooling efficiency rise, which were investigated with head gasket coolant flow passage optimization with flow visualization technique. The test results show that water pump performance was increased effectively, reduction of pump drive torque, and increase of pump flow-rate and pressure rise. Gasket hole pattern optimization test results represent an optimized head coolant flow which stands cross flow from exhaust to intake port side and small vortex were removed.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.905-907
• /
• 1993

Demand for electricity is increasing annually. Especially, the daytime demand grawth shows higher than any other time period. So the big difference between maximum and minimum electrical demand becomes another important problem to be solved. The Battery Energy Storage System is chosen as one of the solutions among the sevral methods. The purpose of utilization of Battery Energy Storage System is to improve the daily load factor. Also, Battery Energy Storage System may be used for the load levelling or the load shifting as well as the spinning reserve. Up to now, only the pumped hydro power plant system has been operated on the commercial basis, but this system has so many constraints such as site, environmental effects, construction period, ect. Being considered current electrical power situation the development of electric storage system is in need latly. Among the various electric storage systems, Battery Energy System is chosen with the top priority because it has sevral merits to cover such as the short construction period, the demand site installation, and the food environmental characteristics.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.1
• /
• pp.336-345
• /
• 1996

A theoretical and experimental study was conducted in order to design highly efficient solar air heaters using porous material. Radiative characteristics of glass windows and porous absorbing media were correlated through spectral transmittances measured by the UV-Visible and the FT-IR spectrometers. Using those characteristics the efficiencies of collectors were numerically calculated with the use of the two-flux radiation model. Based on the theoretical results, an experimental solar collector was designed and constructed. Experimental results under various conditions show that the daily efficiencies are over 60% in general and agree well with the theoretically calculated ones.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.44-47
• /
• 2018

시계열 데이터 처리를 위해 방대한 양의 데이터를 스토리지에서 빠르게 읽어와 처리하려는 움직임이 많아지고 있다. 이를 위해 스토리지의 read latency 를 개선하기 위한 여러 기법들이 제안되었지만, 이 기법들은 분산 노드의 스토리지 자원을 충분히 활용하지 못한다는 한계가 있다. 따라서 우리는 시계열 데이터를 실시간으로 처리하기 위해 스토리지에 병렬적으로 접근하여 read latency 를 개선하는 기법을 제안한다. 제안된 기법은 분산 환경에서 스토리지에 병렬적으로 접근하여, 각 노드에서 부분적으로 데이터를 읽어와 전체 데이터를 읽어오는 지연시간을 줄인다. 우리는 제안된 기법을 여러 노드로 구성된 분산 환경에서 구현하였다. 제안된 기법을 적용한 결과, 전체 데이터를 읽어오는 read latency 가 기존 기법보다 28.04% 줄어든 것을 확인하였다.