• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.82-82
• /
• 2019

종자은행은 종자를 보존하는 가장 경제적이고 효율적인 보전방법이지만, 수종에 따라 저장특성의 차이가 커서 수종별 저장방법의 확립이 필요하다. 초저온저장 방법은 세포 분열, 대사 작용을 정지 상태로 유지하므로 현재까지 장기간 보존을 위한 비용이 효율적이며 안정적인 방법이다. 공시재료는 멸종위기 야생식물 등 22종을 대상으로 하였다. 액체질소에 7일간 종자를 침지한 후 $37^{\circ}C$ 항온수조에서 10분간 해동하였다. 휴면이 있는 수종은 파종 전 종자를 저온습윤 하였고, 저온습윤 처리 후에도 휴면타파 되지 않는 수종은 농황산, 지베렐린을 개별 또는 혼용으로 처리하였다. 발아 및 유묘 평가는 $25^{\circ}C/20^{\circ}C$(광12h/암12h)조건에서 진행하였으며, 매일 28일차까지 발아조사를 수행한 후 평가하였다. 진달래속의 꼬리진달래와 철쭉이 초저온 민감성을 보였으며, 오리나무속의 물오리나무, 사방오리는 부분 민감성을 보였다. 민산초나무는 지하부건물중이 유의하게 감소한 결과를 보였으며, 이외의 수종은 초저온 민감성을 보이지 않았으므로 장기보존을 위한 초저온 동결보존이 가능한 것으로 보였다.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.2
• /
• pp.20-26
• /
• 1984

This study was carried out to investigate the influence of chemical type and its retention in the fire-retardant treated plywoods on the static bending strength, a property peculiar to plywood. Being soaked in 20% aqueous solution of $(NH_4)_2SO_4$, $NH_4H_2PO_4$, $(NH_4)_2HPO_4$. Borax-Boric acid and Minalith for 3 to 12 hours at three-hour intervals and redried at $120^{\circ}C$ in hot press, the treated plywoods were put to static bending test. The values of chemical treated plywoods in Stress at proportional limit, Modulus of elasticity, Modulus of rupture and Work per unit volume to proportional limit were widely higher than those of water treated plywoods(control) and Borax-Boric acid treatment showed the highest value in the four mechanical data. And the bending strength of fire-retardant treated plywoods increased with the extension of soaking time or the increase of chemical retention in themselves. Borix-Boric acid was the desirable fire-retardant for thin plywood in view of mechanical strength and soaking defects in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.358-373
• /
• 2013

In this study, both mild acid and alkali treatments with 1.0 wt% and 2.0 wt% of $H_2SO_4$ and NaOH solution were applied to evaluate the effects on chemical compositions of wood biomass. Yellow poplar (Liriodendron tulipifera L.) and larch (Larix kaempferi C.) were chosen due to major species planted in Korea. Chemical treatments of biomass were carried out by being soaked in either acid or alkali solution with 1:20 ratio for 72 hours at ambient temperature. Afterward, lignin, 5 major reduced sugars, ash contents and elemental composition were determined. To statistically understand the relationship between samples and chemical treatments, the Tukey test, simple linear regression model and ANOVA analysis were introduced using a statistical software R. As results from both wet chemistry and statistical analysis, yellow poplar was more affected on the lignin and xylose contents by acid treatments under these experimental conditions. Meanwhile, larch was more affected on the composition of galactose and lignin by alkali treatments. A series of results in this study would show that equivalent chemical treatment makes a change the chemical composition of each species.

• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.143-152
• /
• 1992

Corrosion resistances in various acids and high temperature oxidation properties have been investigated for the Ni-base superalloy KM 1557. Corrosion tests were performed in $H_2SO_4$, HCl, $HNO_3$, $H_3PO_4$ and $CH_3COOH$. Oxidation tests were carried out in air for 20 and 110hrs at $900^{\circ}C$, $950^{\circ}C$ and $1050^{\circ}C$. Hot corrosion tests were done in salt bath of 75% $Na_2SO_4-25%$ NaCl at $900^{\circ}C$ for 20hrs. After the tests, the samples were observed by optical microscopy and analysed by EPMA and X-ray mapping in order to investigate the distribution of composition. It was shown that corrosion resistances in various acids and hot salt bath were proven to be excellent. It was suggested that the amounts of oxides were determined mainly by the depth of internal and intergranular $Al_2O_3$ oxide layers.

• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.111-119
• /
• 2018

This study was carried out to investigate the differences in germination and growth of Quamoclit coccinea Moench under various temperatures, seeding depths, and levels of shading and soil moisture for effective weed management. Seed dormancy of Q. coccinea Moench was over 1 year; best results were obtained when seeds were soaked in sulfuric acid for 15 minutes in order to break the dormancy. Germination rates of Q. coccinea Moench ranged from 69 to 73% at $25-35^{\circ}C$ and 26% at $15^{\circ}C$. The germination rates ranged from 70-84% at 2, 3, 5, 7, and 8 cm of seeding depths. In addition, the germination rates were 7% and 13% at 12 cm and 15 cm of seeding depths, respectively, and showed normal growth at the both seeding depths. Q. coccinea Moench showed a high germination rate regardless of shading levels, but shoot fresh weight varied depending on the level of shading as follows: 20%>no shading=shading 35%>shading 50%>shading 75%=shading 90%. Q. coccinea Moench did not germinate when soil had a saturation rate of either 30% or 100%. However, 60-83% of seeds germinated with optimal growth when soil had saturation rates of 60% and 80%.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.4
• /
• pp.12-18
• /
• 1984

Soaking treated in 20% aqueous solutions of $(NH_4)_2SO_4$, $NH_4H_2PO_4$, $(NH_4)_2HPO_4$, $Na_2B_4O_7-H_3BO_3$(60:40) and Minalith, the mixed salts for 9 hrs. the wet 3.5mm meranti (Parashorea spp.) plywoods were press-dried at 90, 120 and $150^{\circ}C$ and put to static bending test to examine the influence of redrying temperature on the strength of fire-retardant treated plywoods ill flexure. While water-soaking treatment (control) showed serious reduction in Stress at proportional limit, MOE, MOR, Work per unit volume at $150^{\circ}C$, all the fire-retardant treatments maintained bending strength even at $150^{\circ}C$ and showed rather increased values in case of some chemicals. In view of drying rate and maintenance of strength, the most pertinent platen temperature was $150^{\circ}C$ and Borax-Boric acid was the predominant fire-retardant in this study.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.4
• /
• pp.245-250
• /
• 1998

This research was carried out to investigate the effective methods of browning inhibition on Paeonia lactiflra Pall during hot air dehydratin. After drying for 36 hrs without pretreatment and with briquet fumigation moisture contents of Paeonia lactiflora Pall. was 16.0% and 16.2%, respectively, while with acidic solution, sulfite salt solution and blanching it was lower of 13.5, 12.9 and 14.8%, respectively. Using freeze drying moisture content was highest of 18.8%. The Hunter values of dried Paeonia lactiflora Pall., L, a, band ${\triangle} E$ showed that non-treatment had the most browning with 61.60, 1.89, 10.20 and 39.78, respectively, while briquet fumigation and sulfite salt solution were excellent in reducing browning. During freeze drying browning didn't occur. Paeoniflorin content was 2.41 and 2.51 %, respectively, in briquet fumigation and sulfite salt solution and was the highest (2.70%) in freeze drying. The content of $SO_2$, was 0.63% both in briquet fumigation and sulfite salts. It was 0.15% and 0.17% higher than nontreatment and freeze drying. The most effective pretreatment to inhibit browning of Paeonia lactiflora Pall. was soaking in sulfite salt solution $(0.5% NaHSO_4-0.5% Na_2S_2O_3)$ considering many things such as manpower, economical efficiency, drying time, commodity, etc. but safety should be evaluated to treat sulfite salts solution on peony roots.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.123-130
• /
• 1969

Five varieties of sweetpotatoes recommended in Korea were investigated with respect to the storing capacity, resin content and the possibility of developing sweetpotato chips as a new processed food item. The results are summarized as follows: 1) Two varieties, Suwon No. 147 and Chun-Mi were more resistant to chilling injury and soft-rot decay than other varieties. 2) The contents of resinous and polyphenolic substances were quite different depending upon the variety. 3) Sweetpotato chips of different color were made from different varieties and rapeseed oil was found to be the best as frying oil. 4) Best conditions to prepare sweetpotato chips with fresh color and proper texture were to dip slices of 1-2 mm thickness in 0.25% sodium bisulfite solution at $40^{\circ}C$ for 30-40 minutes and to subject to deep frying in an oil bath at $150-160^{\circ}C$ for 2.5 to 3.5 minutes. 5) Polyethylene-cellophane film as packing material of sweetpotato chips was the film in the moisture proof and film-impact tests.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.80-87
• /
• 2020

The purpose of this study is to investigate the physical properties and self-healing effects of hardener-free epoxy-modified mortars(EMMs) using ground granulated blast furnace slag(GGBFS). The EMMs with GGBFS were prepared with various polymer-binder ratios and GGBFS contents, and tested for strengths, adhesion in tension, water permeation and self-healing effects. The conclusions obtained from the test results are summarized as follows. The compressive strength of the EMMs with GGBFS is reduced with increasing polymer-binder ratios because of reduction of the degree of hardening in the EMMs, and is somewhat inferior to that of unmodified mortars. In the flexural and tensile strengths, the flexural strength of the EMMs is almost constant with increasing polymer-binder ratios. However, the tensile strength of the EMMs is gradually increased with increasing polymer-binder ratios. Regardless of the GGBFS contents, the adhesion in tension of the EMMs increases sharply with increasing polymer-binder ratios. The water permeation of the EMMs is remarkably reduced with increasing polymer-binder ratios and GGBFS contents. The self-healing effect of the hardener-free EMMs with GGBFS is improved with increasing water immersion period at a GGBFS content of 20%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.67-72
• /
• 2022

Concrete prevents corrosion of reinforcing bars due to its strong alkalinity. However, in the sea, strong alkali components with a pH of 12 to 13 are eluted, which adversely affects the ecological environment and growth of marine organisms. In this study, the mechanical properties and durability of the low alkali mortar were evaluated for the development of a low alkali mortar for the 3D printed artificial reefs. As a result of evaluation of strength characteristics, the α-35 mixture, which were produced with fly ash, silica fume and α-hemihydrate gypsum, satisfied the strength requirement 27 MPa in terms of compressive strength. As a result of pH measurement, it was found that mixing with alpha-type hemihydrate gypsum resulted in minimizing pH due to the the formation of calcium sulfate instead of calcium hydroxide production. As a result of the chloride ion penetration resistance test, the α-35 mixture exhibited the best performance, 3844C. As a result of measuring the length change over time, the α-35 mixture showed the shrinkage 33.5% less compared to the Plain mix.