• 한국전기화학회:학술대회논문집
• /
• 2001.06a
• /
• pp.231-236
• /
• 2001

용융탄산염 연료전지용 anode의 creep 현상을 개선하기 위해 $Ni-5wt.\%Al$ green sheet를 사용하여 다양한 소결조건을 적용, $Al_2O_3$를 형성시킨 전극을 제조하고 그 $Al_2O_3$의 형태에 따른 creep 특성에 대해 연구하였다. 소결은 각각 환원분위기, 완전산화-환원분위기, 부분 산화-환원분위기의 서로 다른 분위기에서 진행하였는데, 부분산화-환원분위기로 소결한 경우 Ni-Al 고용체 네트워크를 깨드리지 않고 $A1_2O_3$를 미세한 입자형태로 분산시킬 수 있었다. 그리고, 상기의 방법으로 제조된 anode를 $650^{\circ}C$에서 100psi로 가압하면서 creep test를 실시한 결과 약 $2.3\%$의 변형율을 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.66-66
• /
• 2010

잉크젯용 저온 Cu ink의 소성 특성을 향상 시키기 위해 소성 분위기롤 조절 하였다. 일반적으로 Cu는 산화가 잘되는 물질로 환원 분위기에서 소성이 이루어져야만 하기 때문에 acid, alcohol, aldehyde, ether와 같은 환원제를 소성시 사용하였다. 또한 1종의 환원제가 아닌 2종의 환원제롤 일정 비율로 섞음으로써 환원력를 조절하여 소성 품질을 향상 시킬 수 있었으며, 이러한 환원 분위기 조절을 통하여 300도 이하 저온에서 소성이 가능하였다. 또한 optical microscopy와 field emission scanning electron microscopy를 통해 막 품질과 미세조직의 치밀도를 확인하였고 배선 재료로써의 적용을 위해 resistance를 측정 비교하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.328-328
• /
• 2010

압전 세라믹스는 엑츄에이터 및 센서 등의 다양한 응용분야로 인하여 많은 연구가 진행되어왔다. 최근 친환경 무연 압전계인 Bi층상구조 (BNT) 및 알칼리 니오븀산화물계 (KNN)에 대한 연구가 집중되고 있다. 한편, 소형화 및 고성능의 압전소자에 대한 요구 증가로 고가의 내부전극인 Ag, Ag-Pd합금으로 이루어진 적층압전소자에 대한 연구개발이 진행되어 왔다. 본 연구에서는 Ni이나 Cu를 내부전극으로 사용하는 적층압전소자의 개발가능성을 타진하고자 Ni의 산화를 억제할 수 있는 환원분위기 소결시에 압전소재의 상변화 및 내환원성 정도를 조사하였다. 압전소재인 BNT 및 KNN를 공기중에서 합성한 후, 환원분위기의 영향을 조사하고자 샘플을 디스크 형태로 성형하여 $1000{\sim}1200^{\circ}C$에서 2 시간 동안 공기, 중성 (N2) 와 환원 분위기 (3 % H2 - 97 %의 N2) 에서 소결한 후 미세구조와 전기적 특성을 SEM, EDS, XRD, impedance analyzer로 조사였다. 환원분위기에서 소결된 BNT 샘플은 페롭스카이트 상이 관찰되지 않았으며, SEM/EDS 분석결과 시편의 표면에 Bi의 석출이 관찰되었다. KNN의 경우에는 공기중에서 소결 시편뿐만 아니라 환원분위기에서 소결된 시편에서도 페롭스카이트 구조를 보였으며, EDS분석결과 K 및 Na의 휘발이 비교적 적었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.1-8
• /
• 2008

Effects of annealing process in a reduction ambient on thermoelectric properties of the $(Bi,Sb)_{2}Te_3$ thin films prepared by thermal evaporation have been investigated. With annealing at $300^{\circ}C$ for 2 hrs in a reduction ambient(50% $H_2$+50% Ar), the crystallinity of the $(Bi,Sb)_{2}Te_3$ thin films were substantially improved with remarkable increase in the grain size. Seebeck coefficients of the $(Bi,Sb)_{2}Te_3$ thin films increased from$\sim90{\mu}V/K$ to $\sim180{\mu}V/K$ with annealing in the reduction ambient due to decrease in the hole concentration. Power factors of the $(Bi,Sb)_{2}Te_3$ thin films were remarkably improved for $5\sim16$ times with annealing in the reduction atmosphere. After annealing in the reduction ambient, a $(Bi,Sb)_{2}Te_3$ evaporated film exhibited a maximum power factor of $18.6\times10^{-4}W/K^{2}-m$.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.64-72
• /
• 2020

When the multi-stage combustion process is applied to the cement kiln to reduce nitrogen oxide emissions in the cement industry, oxidation/reduction section that can increase combustion efficiency by reducing NO_x to NO and completely burning unburned materials is essential In this study, when applied the oxidation/reduction system of the cement kiln preheater and calciner, the optimal oxidation/reduction calcination crisis that can secure the quality stability of the final product, cement clinker, was to be observed macroscopically, and the mass change of raw materials according to the burning conditions, decarbonation rate, and calcination rate were investigated. The results showed that the thermal decomposition of raw materials tends to be promoted in the oxidation condition rather than in the reduction condition, and that the thermal decomposition of limestone, which has a relatively high CaO content, is carried out later than that of cement raw meal, which is thought to be caused by the CO₂ fractionation in the kiln. The thermal decomposition properties of raw materials according to oxidation/reducing burning condition showed a relatively large difference in temperature range lower than normal limestone themal decomposition temperature, which is thought to be expected to improve the thermal efficiency of raw materials according to the formation of oxidation condition in the section 750℃ of burning temperature. However, for this study, lab scale. Because there is a difference from the field process as a scale study, it is deemed necessary to verify the actual test results of the pilot scale.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.2
• /
• pp.71-75
• /
• 2006

The aggregates made of clay, carbon and $Fe_2O_3$ were prepared to investigate the mechanism of black core formation and the property differences at various sintering atmospheres. The aggregates were sintered at oxidized, neutralized and reduced atmospheres. The specific gravity, absorption rate, percent of black core area were measured at various compositions and sintering atmospheres. The aggregates sintered at oxidized atmosphere showed clear border between shell and black core area. Hence, the aggregates sintered at reduced and neutralized atmospheres showed only black core area in the cross-section of the aggregates. The specific gravity of the aggregates sintered at reduced atmosphere increased with increasing carbon contents and that was the lowest of all aggregates sintered at various atmospheres. Adsorption rate increased with increasing carbon contents at all atmospheres.

• Resources Recycling
• /
• v.19 no.1
• /
• pp.21-26
• /
• 2010

In order to understand the microwave carbothermic reduction of steelmaking slag to recover Fe, the effects of gas atmosphere and carbon addition on the carbothermic reduction behavior of CaO-$SiO_2$-FeO slag were investigated. It was found that the maximum temperature and the reduction rate were higher in air than in nitrogen atmosphere. In addition, under air atmosphere, the maximum temperature and the reduction rate were increased by increasing the amount of additive carbon. When the carbon equivalent is 5, the maximum temperature reached as high as 1800K and the reduction rate was approximately 90%. As the Carbon equivalent increased further, the maximum temperature and the reduction rate did not change.

• Journal of Energy Engineering
• /
• v.28 no.2
• /
• pp.55-62
• /
• 2019

The purpose of this research is to find the optimum combustion conditions for the celadon using a gas kiln. It is clearly defined by the amount of CO gas in the kiln that it is fired in the commonly used oxidation and reduction atmosphere. As a result, while celadon was fired at $1250^{\circ}C$, oxidation happened when the amount of CO was 0~4,500 PPM, a neutral condition happened when the of CO was 4,500~25,000PPM and a reducing process was happened when the of CO was more that 25,000PPM. To reduce gas and firing time while keeping uniformly the firing temperature and firing condition of the gas kiln, you can partially block the gas corridor and adjust it as a damper. This adjustment reduces gas consumption by 40% and shortens the firing time by 1 hour.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.7
• /
• pp.689-696
• /
• 2010

The Because of its high thermal efficiency, the direct injection (DI) diesel engine has emerged as a promising potential candidate in the field of transportation. However, the amount of nitrogen oxides ($NO_x$) increases in the local high-temperature regions and that of particulate matter (PM) increases in the diffusion flame region during diesel combustion. In the de-$NO_x$ system the Lean $NO_x$ Trap (LNT) catalyst is used, which absorbs $NO_x$ under lean exhaust gas conditions and releases it in rich conditions. This technology can provide a high $NO_x$-conversion efficiency, but the right amount of reducing agent should be supplied to the catalytic converter at the right time. In this research, the emission characteristics of a diesel engine equipped with a micro-reformer that acts as a reductants-supplying equipment were investigated using an LNT system, and the effects of the exhaust-gas temperature were also studied.

• Cement
• /
• s.87
• /
• pp.48-50
• /
• 1982

화학적인 면에서 황색 clinker를 생성하는 근본원인은 $Fe^{3+}$이온이 $Fe^{3+}$이온으로 되거나, $Mg^{2+}$이온이 $Fe^{3+}$에 작용할수 없는 경우다. 이러한 원인이 생기는 공정상의 요인으로는 전체적 또는 부분적인 환원분위기, 화염접촉 및 과소, 원료에 산화물이 함유된 경우, 서냉 또는 1,250$^{\circ}C$이하에서 냉각, 기타 MgO, $MnO_2$, $Cr_2O_3$, $TiO_2$ 등 미량성분의 경향을 들 수 있다. 환원분위기의 경우에는 free CaO의 증가, $C_3S$의 감소로 인한 강도저하와 $C_3A$ 증가, $C_4AF$ 감소에 의한 조기 경화를 초래하게 되어 품질이 저하된다.