• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.150-158
• /
• 1999

본 연구는 저온플라즈마를 이용하여 배기가스중의 SOx와 NOx를 동시에 처리하는 공정을 개발하는 것으로서, 최적의 반응제 선정과 효율적인 공정의 구성을 위해 SOx, NOx와 반응제와 반응기구를 밝히고자 하였다. 실험은 1.0 N㎥/h의 모사가스를 이용한 기초실험과 20 N㎥/h의 실제 연소가스를 이용한 실험으로 진행되었으며, 반응제로는 NH3와 파리핀계 및 올레핀계 탄화수소를 사용하였다. NH3를 반응제로 한 SO2 제거반응은 비플라즈마 조건에서는 NH4HSO3, 플라즈마 조건에서는 (NH4)2SO4의 생성반응이었고, 두 조건 모두 높은 제거율을 나타냈다. 반응제를 사용하지 않은 플라즈마 조건에서 SO2는 환원반응이 일어나고 O2 농도의 증가는 역반응을 증가시키는 화학평형에 의해 SO2의 제거율이 감소되었다. 플라즈마 조건에서 NO는 O2농도가 낮은 경우는 NO의 환원반응이 주로 일어나고, O2 농도가 높을 경우는 산화반응이 지배적이었다. 올레핀계 탄화수소는 플라즈마 조건에서 NO 산화 반응에 탁월한 효과를 보였을 뿐만 아니라 SO2 제거에도 효과를 보여 최대 40%의 제거율을 나타냈으며, NH3의 사용을 줄일 수 있음을 확인하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.117-121
• /
• 2003

Nickel(Ni) powders were prepared from the mixture of nickel chloride and magnesium stearate by a hydrogen reduction process, and the effect of reaction temperature and the addition of magnesium stearate on the chracteristics of the powders were investigated. The effect of size reduction of nickel particles was observed in the presence of magnesium stearate owing to the inhibition of excess growth of paricles. The size reduction and the degree of agglomeration of the particles affected by the amounts of liqiud phase, which related to the increase of magnesium stearate.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.145-146
• /
• 2003

질소산화물은 천연가스, 석유, 석탄과 같은 화석연료 연소 시에 배출되는 대표적 오염물질로 산성비를 유발시키며, 오존, PAN, aldehyde와 같은 광화학 산화물을 형성하여 광화학 스모그를 유발한다. 따라서 NOx 제어의 필요성은 더욱 강조되고 있다. NOx 처리 공정 중 대표적인 SNCR(Selective Non-Catalytic Reduction)공정은 N-계열 시약(환원제)을 노내의 온도가 90$0^{\circ}C$에서 110$0^{\circ}C$인 구역으로 주입하여 NOx가 복잡한 단위반응들을 거쳐서 N2와 $H_2O$로 분해되는 저감기술의 하나로서 초기 설치비가 저렴하고 단기간에 쉽게 설치 가능한 기술이지만, 대부분 외국기술의 도입에 의존하고 있는 실정이므로 국내개발을 필요로 한다. (중략)

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.356-362
• /
• 2006

The $SO_2$ reduction using CO and $H_2$ over Sn-Zr based catalysts was performed in this study. Sn-Zr based catalysts with Sn/Zr molar ratio (0/1, 1/4, 1/1, 2/1, 3/1, 1/0) were prepared by the precipitation and co-precipitation method. The effect of the temperature on the reaction characteristics of the $SO_2$ reduction with a reducing agent such as $H_2$ and CO was investigated under the conditions of space velocity of $10,000ml/g_{-cat.}h$, $([CO(or\;H_2)]/[SO_2])$ of 2.0. As a result, the activity of Sn-Zr based catalysts were higher than $SnO_2$ and $ZrO_2$. The reactivity for the $SO_2$ reduction with CO was higher than that with $H_2$, and sulfur yield in the $SO_2$ reduction by $H_2$ was higher than that by CO. The reactivity for the $SO_2$ reduction with $H_2$ was increased with the reaction temperature regardless of Sn-Zr based catalyst with a Sn/Zr molar ratio. $SnO_2-ZrO_2$ (Sn/Zr=1/4) had highest activity at $550^{\circ}C$, in the $SO_2$ reduction with $H_2$ and $SO_2$ conversion of 94.4％ and sulfur yield of 66.4％ were obtained at $550^{\circ}C$. On the other hand, in the $SO_2$ reduction by CO, the reactivity was decreased with the increase over $325^{\circ}C$. At the optimal temperature of $325^{\circ}C$, $SO_2$ conversion and sulfur yield were about 100％ and 99.5％, respectively, in the $SO_2$ reduction over $SnO_2-ZrO_2$ (Sn/Zr=3/1). Also, the $SO_2$ reduction using syngas with $CO/H_2$ ratio over $SnO_2-ZrO_2$ (Sn/Zr=2/1) was performed in order to investigate the application possibility of the simulated coal gas as the reductant in DSRP. As a result, the reactivity of the $SO_2$ reduction using syngas with $CO/H_2$ ratio was increased with increasing the CO content of syngas. Therefore, it could be known that DSRP using the simulated coal gas over Sn-Zr based catalyst is possible to be realized in IGCC system

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.04a
• /
• pp.33-33
• /
• 2001

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2004.11a
• /
• pp.107-109
• /
• 2004

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2002.05a
• /
• pp.113-114
• /
• 2002

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.87-88
• /
• 2008

전통 쪽 염색과정을 단순화하여 기존의 환원과 발생이 동시에 이루어지는 공정조건을 다룬다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.11a
• /
• pp.43-43
• /
• 2007

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2005.04a
• /
• pp.39-40
• /
• 2005