• Clean Technology
• /
• v.27 no.4
• /
• pp.332-340
• /
• 2021

With the recent reinforcement of emission standards, it is necessary to make efforts to reduce NOx from air pollutant-emitting workplaces. The NOx reduction method mainly used in industrial facilities is selective catalytic reduction (SCR), and the most commercial SCR catalyst is the ceramic honeycomb catalyst. This study was carried out to reduce the NOx emitted from steel plants by applying De-NOx catalyst coated on metallic monolith. The De-NOx catalyst was synthesized through the optimized coating technique, and the coated catalyst was uniformly and strongly adhered onto the surface of the metallic monolith according to the air jet erosion and bending test. Due to the good thermal conductivity of metallic monolith, the De-NOx catalyst coated on metallic monolith showed good De-NOx efficiency at low temperatures (200 ~ 250 ℃). In addition, the optimal amount of catalyst coating on the metallic monolith surface was confirmed for the design of an economical catalyst. Based on these results, the De-NOx catalyst of commercial grade size was tested in a semi-pilot De-NOx performance facility under a simulated gas similar to the exhaust gas emitted from a steel plant. Even at a low temperature (200 ℃), it showed excellent performance satisfying the emission standard (less than 60 ppm). Therefore, the De-NOx catalyst coated metallic monolith has good physical and chemical properties and showed a good De-NOx efficiency even with the minimum amount of catalyst. Additionally, it was possible to compact and downsize the SCR reactor through the application of a high-density cell. Therefore, we suggest that the proposed De-NOx catalyst coated metallic monolith may be a good alternative De-NOx catalyst for industrial uses such as steel plants, thermal power plants, incineration plants ships, and construction machinery.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.223-232
• /
• 2021

In general, stormwater flows to the road surface, especially in urban areas, and it is discharged through the drainage grate inlets on roads. The appropriate evaluation of the road drainage capacity is essential not only in the design of roads and inlets but also in the design of sewer systems. However, the method of road surface flow analysis that reflects the topographical and hydraulic conditions might not be fully developed. Therefore, the enhanced method of road surface flow analysis should be presented by investigating the existing analysis method such as the flow analysis module (uniform; varied) and the flow travel time (critical; fixed). In this study, the algorithm based on varied and uniform flow analysis was developed to analyze the flow pattern of road surface. The numerical analysis applied the uniform and varied flow analysis module and travel time as parameters were conducted to estimate the characteristics of rainfall-runoff in various road conditions using the developed algorithm. The width of the road (two-lane (6 m)) and the slope of the road (longitudinal slope of road 1 - 10%, transverse slope of road 2%, and transverse slope of gutter 2 - 10%) was considered. In addition, the flow of the road surface is collected from the gutter along the road slope and drained through the gutter in the downstream part, and the width of the gutter was selected to be 0.5 m. The simulation results were revealed that the runoff characteristics were affected by the road slope conditions, and it was found that the varied flow analysis module adequately reflected the gutter flow which is changed along the downstream caused by collecting of road surface flow at the gutter. The varied flow analysis module simulated 11.80% longer flow travel time on average (max. 23.66%) and 4.73% larger total road surface discharge on average (max. 9.50%) than the uniform flow analysis module. In order to accurately estimate the amount of runoff from the road, it was appropriate to perform flow analysis by applying the critical duration and the varied flow analysis module. The developed algorithm was expected to be able to be used in the design of road drainage because it was accurately simulated the runoff characteristics on the road surface.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.245-256
• /
• 2021

This study was conducted to identify the applicability of a LiDAR sensor to forest resources inventories by comparing data on a tree's position, height, and DBH obtained by the sensor with those by existing forest inventory methods, for the tree species of Criptomeria japonica in Jeolmul forest in Jeju, South Korea. To this end, a backpack personal LiDAR (Greenvalley International, Model D50) was employed. To facilitate the process of the data collection, patterns of collecting the data by the sensor were divided into seven ones, considering the density of sample plots and the work efficiency. Then, the accuracy of estimating the variables of each tree was assessed. The amount of time spent on acquiring and processing the data by each method was compared to evaluate the efficiency. The findings showed that the rate of detecting standing trees by the LiDAR was 100%. Also, the high statistical accuracy was observed in both Pattern 5 (DBH: RMSE 1.07 cm, Bias -0.79 cm, Height: RMSE 0.95 m, Bias -3.2 m), and Pattern 7 (DBH: RMSE 1.18 cm, Bias -0.82 cm, Height: RMSE 1.13 m, Bias -2.62 m), compared to the results drawn in the typical inventory manner. Concerning the time issue, 115 to 135 minutes per 1ha were taken to process the data by utilizing the LiDAR, while 375 to 1,115 spent in the existing way, proving the higher efficiency of the device. It can thus be concluded that using a backpack personal LiDAR helps increase efficiency in conducting a forest resources inventory in an planted coniferous forest with understory vegetation, implying a need for further research in a variety of forests.

• The Korean Journal of Archival Studies
• /
• no.24
• /
• pp.113-171
• /
• 2010

The purpose of this study was to examine the characteristics of Seoul Olympic Organizing Committee's official documents. To conduct this work, the fundamental of producing archives were examined by analyzing structure and management of Seoul Olympic Organizing Committee and structure of official document production. After all, simultaneous and synthesis characteristics of Seoul Olympic Organizing Committee's official documents were presented through overall analysis of production fundamental and relationship between their management and remained archives. The result of this study are as follows. Firstly, The Organizing Committee had bicameral organizational structure and matrix organizational format consisting of functional department and project department. Indicating the institutions and development phase of decision making in the committee, most of institutions were in name only. Also, there were many problems occurred in the procedure of decision making since the president of committee exercised all of the authorities. Secondly, It was found that existing official documents of the committee were partial and caused fragment phenomenon and severe situations because of unsystematic archival management department and regulations. Moreover, as the result of investigating production procedure and management of official documents, procedure of production, distribution, preservation and abolition of them were specifically verified. Thirdly, It was verified that the official documents were abolished arbitrarily because of unsystematic archival management department and insufficient regulations. For the actual condition of management, filing or description activity which is essential measure for using and utilizing the official documents has not been conducted yet. Based on these facts, the characteristics of Seoul Olympic Organizing Committee's official documents can be referred as follows. The official archives of the committee have multiplicity of the origin and severe fragment phenomenon damaging the origin and the elementary substance of the archives. Also, the format of existing archives was unbalance. Besides, there was not enough related research since they were in adverse situation to utilize them as the archives which are not assessed or not arranged. Thus, it was hard to grasp the utility value at present and future, and was also limited for usage object.

• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.261-272
• /
• 2018

This study was conducted to evaluate the difference in the quality of chicken thigh meat from conventional and animal welfare farms during refrigeration storage over 9 days. Chicken thigh meat from conventional (CTC, n = 30) and animal welfare farms (CTW, n = 30) was tested. The pH value was significantly lower in CTW (6.28) than in CTC (6.37) on day 1; however, no significant differences were found on subsequent days. The yellowness of CTW was higher than that of CTC on day 1, but CTW showed lower yellowness than did CTC on day 7 and 9. The cooking loss, water holding capacity, lightness, redness, and coliform levels of CTC did not show any significant difference when compared with CTW during storage. The shear force of CTW was significantly higher than that of CTC on day 1, 3, 7, and 9. Total microorganism and coliform in CTC and CTW increased with increasing storage days. On day 7 and 9, the total microorganism level of CTW was lower than that of CTC. The thiobarbituric acid value of CTW was lower than that of CTC on day 9. The volatile basic nitrogen (VBN) of CTW was lower than that of CTC during storage. Anserine content and 1,1-diphenyl-2-picryl-hydrazyl(DPPH) scavenging activity of CTW was significantly higher than CTC on day 1. These results suggest that CTW stayed fresher for longer than did CTC because of low total microorganism level on day 7 and 9, and VBN during refrigerated storage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.200-206
• /
• 2019

Korea is introducing new animal welfare rearing standards for swine farmers in order to improve the breeding environment of livestock on Korean farms, Korea is establishing a policy to apply to all new farms in 2019 and to all existing farms in 2025. These guidelines are limiting stall breeding of sows after 4 weeks of pregnancy, the light intensity should be above 40lux, the ammonia level should be below 25ppm and the breeding density area should be increased from $1.4m^2$ to $2.25m^2$. In Europe, where animal welfare has been studied and applied for nearly 100 years, the facility specifications and management manuals are available and provided to farmers to introduce proper animal welfare for pigs and to enhance the convenience and utility of farmers who are converting to raising pigs. The EU has established independent standards for each country, and the EU has set the standards for floor facilities to improve animal welfare on pig farms and as applied by farmers. Yet in Korea, there are no methods and techniques for breeding methods that do not use an ordinary stall, except on a few leading farms. There has been no research on the welfare of sows so that farmer could improve sows' living conditions. Thus, farmers can minimize the difficulty of implementing the changing government policies, and they must develop farm turnover policies and specification management manuals to cope with the introduced regulations on sow group housing. We suggest that conducting research and evaluating the level of sows' welfare are important for farmers.

• Korean Journal of Community Nutrition
• /
• v.24 no.3
• /
• pp.232-244
• /
• 2019

Objectives: This study evaluated the nutritional status and prevalence of metabolic syndrome of the people who participated in the KNHANES according to the number of household members. They were assessed by using information from the 2013~2014 Korea National Health and Nutrition Examination Survey (KNHANES). Methods: A total of 6,088 persons aged 19 years and over participated in 2013~2014 KNHANES, and they were classified into three groups according to the number of household members (single-person, two-person, three-person & over). The dietary behavior, nutritional status, health-related factors and the prevalence of metabolic syndrome of the subjects were investigated with using information from the survey questionnaires of KNHANES. The nutrient intake data of the subjects were obtained by the 24-hour recall method and this was analyzed for evaluating the nutrition adequacy ratio and the index of nutritional quality. The prevalence of metabolic syndrome among the subjects, and according to the study groups, was estimated using the blood and physical measurement data of the subjects. Results: As for EQ-5D index available for all the health states generated by the EQ-5D descriptive system, the single-person household member was the lowest among all the household types. The index of nutrition quality for protein, crude fiber, calcium, phosphorus, potassium, riboflavin and vitamin C in the single-person household was lower than that of the two-person or the three-person and over households (p<0.001). The mean adequacy ratio of single-person households was significantly decreased compared with that of the other types of households (p<0.001). The prevalence of metabolic syndrome was higher in the single-person households than that in the multiple-person households (p<0.001). Conclusions: These results showed that dietary behaviors, nutrition status and health status might be influenced by the number of household members. The results from this study would be useful for improving Korean people's dietary life and health status by implementing evidence-based, specialized intervention for the members of diverse types of households.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.127-136
• /
• 2019

Sweet sorghum (Sorghum bicolor L. Moench), compared to traditional crops, has been evaluated as a useful crop with high adaptability to the environment and various uses, but cultivation has not expanded owing to a lack of related research and information in Korea. This study was conducted to estimate heading date in 'Chorong' sweet sorghum based on climate data of the last 30 years (1989 - 2018) from six regions (Jeonju, Buan, Jeongup, Imsil, Namwon, and Jangsu) in Jellabuk Province. In addition, we compared the growth and quality factors by sowing date (April 10, April 25, May 10, May 25, June 10, June 25, and July 10) in 2018. Days from sowing to heading (DSH) increased to 107, 96, 83, 70, 59, 64, and 65 days in order of the sowing dates, respectively, and the average was 77.7 days. The effective accumulated temperature for heading date was $1,120.3^{\circ}C$. The mean annual temperature was the highest in Jeonju, followed in descending order by Jeongup, Buan, Namwon, Imsil, and Jangsu. The DSH based on effective accumulated temperature gradually decreased in all sowing date treatments in the six regions during the last 30 years. DSH of the six regions showed a negative relationship with mean temperature (sowing date to heading date) and predicted DSH ($R^2=0.9987**$) calculated by mean temperature was explained with a probability of 89% of observed DSH in 2017 and 2018. At harvest, fresh stem weight and soluble solids content were higher in the April and July sowings, but sugar content was higher in the May 10 ($3.4Mg{\cdot}ha^{-1}$) and May 25 ($3.1Mg{\cdot}ha^{-1}$) sowings. Overall, the April and July sowings were of low quality and yield, and there is a risk of frost damage; thus, we found May sowings to be the most effective. Additionally, sowing dates must be considered in terms of proper harvest stage, harvesting target (juice or grain), cultivation altitude, and microclimate.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.1
• /
• pp.101-116
• /
• 2019

Technology-based start-up is important in that it encourages innovation, facilitates the development of new products and services, and contributes to job creation. Technology-based start-up activates entrepreneurship when appropriate support is provided within the ecosystem. Thus, understanding the technology-based start-up ecosystem is crucial. The purpose of this study is as follows. First, in Herrmann et al.'s(2015) study, we compare and analyze the ecosystem of each country by selecting representative regions such as Silicon Valley, Tel Aviv, London and Singapore which have the highest ranking in the start-up ecosystem. Second, we try to deeply understand the start-up ecosystem based on in-depth interviews with various stakeholders such as VC investors, start-ups, support organizations, and professors related to the Korean start-up ecosystem. Finally, based on the results of the study, we suggest development and activation of Korean technology-based start-up ecosystem. As a result, the Seoul start-up ecosystem showed a positive evaluation of government support compared to other advanced countries. In addition, it was confirmed that the ratio of tele-work and start-up company working experience of employees was higher than other countries. On the other hand, in Seoul, It was confirmed that overseas market performance, human resource diversity, attracting investment, hiring technological engineers, and the ratio of female entrepreneurs were lower than those of overseas advanced countries. In addition, according to the results of the interview analysis, Seoul was able to find that start-up ecosystems such as individual angel investors, accelerators, support institution, and media are developing thanks to the government's market-oriented policy support. However, in order for this development to continue, it is necessary to improve the continuous investment system, expansion of diversity, investment return system, and accessibility to the global market. A discussion on this issue is presented.

• Korean Journal of Breeding Science
• /
• v.49 no.3
• /
• pp.129-140
• /
• 2017

This study was carried out to develop of environmental risk assessments and the biosafety guide for Vitamin E enhanced transgenic soybean at LMO (Living Modified Organism) isolation field. In LMO quarantine area of National Institute of Agricultural Sciences, insect species diversities and population densities on vitamin E enhanced transgenic soybean and non-GM soybeans (Willams 82 and Seoritae) were investigated. A total of 17,717 individuals of 77 species from 8 orders were collected in LMO isolation field. In three type soybeans field, total of 5,250 individuals in Vitamin E enhanced transgenic soybean, 5,510 individuals in Willams 82, and 6,957 individuals in Seoritae were collected, respectively. There was no difference between the population densities of insect pests, natural enemies and other insects on Vitamin E enhanced transgenic soybean and Willams 82, while natural enemies density on Seoritae was higher than on Vitamin E enhanced transgenic soybean, but insect pests density on Vitamin E enhanced transgenic soybean was higher. These results provided the insects diversity for risk assessment survey of Vitamin E enhanced transgenic soybean and suggested that the guideline could be useful to detect LMO crops.