• Journal of Environmental Policy
• /
• v.8 no.1
• /
• pp.49-72
• /
• 2009

To analyze the direct and indirect $CO_2$ emission structure according to industries in Korea, a hybrid IO table quantifying the section of energy in the IO table is needed. However, the results of the recent researches revealed differences in the total amount of $CO_2$ emission by researchers in addition to significant standard deviation in industrial distribution. This study intends to make comparative analysis of the existing method of making an IO table for energy and environment and presents an improvement scheme to contribute to an improvement in calculation of the total amount of $CO_2$ emission and estimation of the emission by industries in Korea. For this purpose, division was made into use as raw materials of energy and that as fuel and a new hybrid IO table was made by removing confounding factors caused by the product tax and subsidies. As a result, the oil and coal industry emitted 5.2 times less $CO_2$ after removing energy inputted as raw materials from the transaction table than before. The amount of $CO_2$ emission estimated by using the IO table based on basic price was found to be 2.7% less than by using the IO table based on the producer price.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.849-864
• /
• 2022

In case of a specific sector being divided into sub-sectors, this study presents a process for estimating an input-output table, which is frequently used as basic data in fields of energy and environment economics. RAS method, which is universally used for this case, requires information on production, intermediate input sum, and intermediate demand sum for each sector in the new table. But in many cases, it is difficult to secure information on intermediate demand sum by sector. This study suggests a process for estimating a new input-output table without using information of intermediate demand sum in the case of sector separation, under the assumption that information of production value and intermediate input sum by sector are available. The key idea is that the values of many elements in the input-output table after disaggregation are the same as those in the table before disaggregation and that the sum of the elements after disaggregation, equals the values of the elements before disaggregation. The process of estimating the intemediate transaction matrix or the input coefficient matrix is presented by using these information instead of intermediate demand sum information. A small-scale simulation shows that the average error rate of the process proposed in this study is about 11.23% in estimating input coefficients, which is smaller than the 11.30% estimation error of RAS using the information of intermediate demand sum. However, since it is known in the literature that using additional information does not always improve estimation performance compared to not using it, additional research on various simulations is needed to apply the method of this study to reality.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.247-255
• /
• 2011

Currently, there is database for per unit requirements of major construction materials in terms of energy consumption and $CO_2$ emission based on the input-output table published by the Bank of Korea in 2000, but no database for per unit requirements based on input-output tables was published in 2005 and 2007. The purpose of this study was to calculate the unit requirement values of major construction materials in terms of energy consumption and $CO_2$ emission generated by using the input-output tables published in 2005 and 2007. To estimate the unit requirement values, a database building method with the input-output tables was adopted by selecting 16 types of construction materials in wide use on construction sites. When the study results were compared with existing unit requirement values based on the input-output table of 2000, there were small discrepancies, from which it can be interpreted that the method used in the study is reasonable. Unit requirement values estimated based on input-output tables of 2005 and 2007 tended to decrease, and the highest value of energy consumption and $CO_2$ emission were found in the materials using cement and rebar.

• Economic and Environmental Geology
• /
• v.47 no.3
• /
• pp.237-246
• /
• 2014

In this study, it is estimated how many changes of macroeconomic variables are happened under the proposition of import substitution of mining products 1% using macroeconometric input-output model. For this, used macroeconometric input-output model is composed of 141 behavioral equations representing the macroeconomy structure. In general, macroeconometrics models are constructed mainly on the side of the expenditure then it is not easy to estimate the effects of the shocks occurred from industry level. To mitigate that, this study tries to construct a macroeconometric input-output model. Macroeconometrics model which is useful to estimate the effects of macroeconomic shocks, economic policy and more, in this study, is linked with input-output table through the NDI(national disposable income) derived from compensation of employee. And this paper presents the estimation results of import substitution effects of mining products on Korean economy. As a results, GDP is increased 0.00073%, gross labor employed 0.00029%, current balanace 0.00010% and unemployment rate is mitigated 0.00233%.

• Environmental and Resource Economics Review
• /
• v.15 no.3
• /
• pp.425-450
• /
• 2006

The index of energy intensity(energy/GDP) has been a primary policy concern since it can clarify industry sectors which use energy intensively and generate $CO_2$ emission heavily. Although energy intensity index may be suitable for estimating $CO_2$ emission from an isolated industry sector, we need an index for induced $CO_2$ emission since industrial activities are interconnected in terms of input and output. By employing Environmental Input-Output Table 2000, this paper analyses the flow of energy demand and pollutants after first estimating an induced $CO_2$ emissions from various industrial sectors and economic activities. The paper reports higher induced $CO_2$ emissions from industry sectors with larger energy intensity since they produces goods or services retaining relatively considerable environmental load. Furthermore, it is shown that environmental load and $CO_2$ emissions in overall economy are likely increasing when the products of energy intensive industrial sector is used as inputs for less intensive sectors' production process. The result suggests we need consistent policy efforts to reduce energy intensity to lower $CO_2$ emissions.

• Electronics and Telecommunications Trends
• /
• v.30 no.2
• /
• pp.59-67
• /
• 2015

소프트웨어(이하 SW)산업은 빠른 기술개발을 바탕으로 새로운 분야가 등장하는 산업이다. 특히 최근에 SW산업이 시스템 SW, 지능형 SW 그리고 인터넷 SW 부문으로 크게 획정되면서 세 부문별로 서로 다른 성장형태를 보여주고 있다. 그러나 SW산업 환경에서 산업분석 및 경제성분석에 사용되는 산업연관분석표는 세부적 경제와 산업을 분석하는 데 한계점이 존재한다. 본 연구에서는 특정한 산업(즉 SW산업)을 몇 개의 새로운 부문(3개 부문)으로 분할하는 기존 산업연관표의 분할방법을 소개하고, 분할된 투입산출표를 이용하여 SW산업 구조분석에 적용하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.426-426
• /
• 2017

국가간 지역간 물의 이동을 개념화하여 물 부족 현상을 정치경제학적 관점에서 접근하려는 가상수(virtual water) 연구가 국제적으로 진행되고 있다. 가상수를 양적 측면에서 산정하여 정확한 물 수지를 파악하면 수자원에 대한 국가의 계획과 전략 수립에 매우 유리한 여건이 조성된다. 우리나라의 국가계획인 수자원장기종합계획은 국가 간의 물 이동을 고려하지 않고 국내에서 발생하는 용수의 수요와 공급 측면만을 산정하고 있다. 그러나 현재에도 국내에서 소비하는 농산물과 축산물의 상당량은 수입에 의존하고 있으며, 향후 국제교역과 FTA의 확대 등으로 그 의존도는 더욱 증대될 것으로 추산된다. 따라서 국가 간 물 이동에 대한 양적 규모를 파악하여 국가전략을 수립하는 기초자료로 활용하기 위한 연구가 필요하다. 이에 본 연구에서는 산업연관분석법을 활용하여 국내 산업별(제조업, 서비스업) 가상수를 산정하여 국가 수자원계획 수립에 필요한 기초자료로서 제공하고자 한다. 산업연관분석(Inter-industry analysis)은 산업연관표를 바탕으로 산업 간의 상호 연관관계를 수량적으로 파악하는 방법이다. 이를 가상수 산정에 활용하여 직접수와 간접수를 포함한 물의 전체 사용량을 산정할 수 있다. 본 연구에서는 각 산업의 용수량을 총 생산량으로 나누어 물 강도($m^3$/원)를 계산하고, 생산유발계수와 최종수요를 곱하는 방식으로 산업별 가상수량을 산정하였다. 산업별 가상수 산정 결과는 경제총조사의 용수비와 산업연관표의 생산유발계수를 적용하였으며, 제2차 산업인 제조업 분야의 연간 가상수량은 60.4억 $m^3$, 제3차 산업인 서비스 분야의 가상수량은 연간 43.1억 $m^3$으로 분석하였다. 또한 향후 10년의 OECD 기술수준 제품군별 무역수지 전망을 고려한 결과, 기술수준 중 및 고 기술제품의 가상수 수출량이 2020년에는 2010년에 비해 약 3배 증가하는 것으로 산정하였다. 이와 같은 방법으로 산정된 산업별 가상수는 각 산업의 물 사용량을 추정하고 산업 전반의 수자원 활용도를 파악하는데 이용 가능하다. 더불어 국제 환경 및 기후변화가 반영된 가상수 시나리오 연구를 통해 장래 용수 수요변화예측 등 효과적인 물 관리 정책 수립에 기여할 수 있다.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.129-141
• /
• 2024

This study derived production-production multipliers using a regional input-output table and estimated the induced effect of aggregates through the non-metallic minerals sector and the concrete products sector. In deriving the induced effect of aggregates, it is difficult to use the regional input-output table due to the sector classification problem. This study analyzed the non-metallic mineral sector, including aggregates, as aggregates sector, and the concrete products sector, which uses most of the aggregate production. By analyzing this, we attempted to alleviate difficulties caused by sector classification restrictions. In the process of estimating the induced effect, it was assumed that there was a decrease in aggregate production, and in the process of analyzing the concrete products sector, the effect of the decrease in concrete product production due to the decrease in aggregate production, that is, the decrease in production of one unit of aggregate was 0.8511 in the concrete product sector. The analysis was conducted on the premise of a decrease in unit production. Inducing effects within and between regions were calculated for the 17 metropolitan cities and provinces classified by the regional input-output table. The employment effect was also calculated, assuming a 10% production decrease to show differences according to the size of the aggregate and concrete product sectors in each region.

• Environmental and Resource Economics Review
• /
• v.7 no.1
• /
• pp.165-183
• /
• 1997

생명공학은 기술의 특성상 보건 의료, 농업, 자원 환경, 에너지 등 광범위한 산업에 응용될 수 있는 고부가가치형, 두뇌기술집약형, 탈공해형, 자원 및 에너지절약형 기술이라는 특징을 지니고 있어 21세기 미래산업을 선도할 것으로 기대되고 있다. 본 연구의 목적은 생명공학기술이 1980년과 1990년 사이의 산업구조에 어떠한 변화를 초래하였는지를 알아보는 것이다. 생명공학의 산업경제적 파급효과를 분석해 보기 위해 한국은행에서 발행한 산업연관표를 이용하여 생명공학 관련산업의 지원에 따른 국내 제반산업의 생산변화율을 측정하였다. 정부의 지원이나 금리 및 세제의 혜택을 통해 생명공학 산업 관련 비용이 감소하게 되면 이에 따른 가격변화가 국내 산업발전과 고용의 증가를 갖는 것으로 믿어진다. 고정계수 아닌 변화계수를 특징으로 하는 본 모형의 접근방법은 생명공학에 대한 재정지원 및 세제 인센티브 등을 외생변수로 처리하여 산업구조 변화의 추이와 고용유발 등을 예측하였다. 본 논문의 가설은 생명공학의 영역이 점차 증대되어 나아가기 때문에 1980년의 제반산업의 영향은 1990년의 영향보다는 적어야 한다. 즉 생명공학 관련비용 하락이 전체산업에 미치는 1980년의 생산율 증가보다 1990년의 생산율 증가가 커야 할 것이다. 본 가설에 대한 검증의 과정에서 얻은 통계치를 통해 생명공학산업이 한국 산업 전체에 미치는 영향이 10년 동안에 그 차이가 거의 없어 미성숙 단계에 있다는 결론을 짓게 되었다. 따라서 생명공학 분야의 계속적인 발전을 위해서는 선진국 수준의 독자적 기술개발을 통한 국제 경쟁력을 강화해야 하는데 이를 위한 정부 및 민간기업 투자확대와 연구개발 지원체제의 확대가 요망되고 있다.

• Environmental and Resource Economics Review
• /
• v.20 no.1
• /
• pp.1-31
• /
• 2011

By employing Environmental Input-Output Table 2005, which has 76 intermediate sector and 21 energy sources, this paper analyses the flow of energy demand and $CO_2$ after estimating an induced $CO_2$ emissions from 76 industrial sectors. Index of $CO_2$ intensity($CO_2/GDP$) and other index of $CO_2$ intensity($CO_2/calory$) showed that final demand sector uses more high calory energy source. Intermediate sector used less environmental friendly energy source and emit more $CO_2$ at same calory. Industries those has high induced $CO_2$ emissions are Thermal Power($32.587CO_2-g/Won$), Cement($10.370CO_2-g/Won$), Road Transportation($7.255CO_2-g/Won$), Cokes and Other Coal Products($5.791CO_2-g/Won$), Steam and Hot water supply, Sewage, Sanitary services($4.575CO_2-g/Won$). It is shown that industry such as Iron and Steel which has low $CO_2$ intensity, high backward linkage effect and high forward linkage effect makes high induced $CO_2$ emissions. Environmental load and $CO_2$ emissions in overall economy will decrease when not high $CO_2$ intensity industry but also low $CO_2$ intensity industry makes lower $CO_2$ intensity.