• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.131-131
• /
• 2012

압전재료는 그 특성상 항공우주분야에서 활용범위가 넓어지고 있는데, 특히 진동제어 분야에 널리 이용되고 있다. 최근에는 위성카메라의 영상 품질개선을 위한 구동기(actuator) 연구도 진행 중이다. 그러나 위성체가 작동하는 우주환경인 고진공상태에서는 각 부품에서 발생할 수 있는 outgassing으로 인해 위성체가 오염되어 위성임무 실패를 초래할 수도 있다. 따라서 지상에서 위성체 부품에 대해 고온($60^{\circ}C$)과 고진공(5.0 E-03 Pa 이하)의 상태를 모사하여 오염물질을 제거함으로써 outgassing 발생을 막고, 오염근원을 검출할 수 있는 bacuum bake-out 시험이 필요수적이다. 압전체의 위성부품 활용성 연구를 위하여 bake-out 챔버를 이용하여 오염측정에 관한 연구를 수행하였다. Vacuum bake-out 시험시에는 TQCM을 사용하여 발생하는 오염물질의 방출률을 측정한다. 아울러, 압전체에 대한 시험 전후의 압전특성을 비교 분석하여 진공 및 온도 환경하에서의 특성 변화를 관찰하였다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.3
• /
• pp.149-159
• /
• 2011

Nuclear power utilities should establish a site-specific groundwater monitoring program for early detection of unplanned radioactive material's releases which can occur due to degradation of systems, structures and components of the nuclear power plants in order to keep the impact of the unplanned releases on the environment and the residents as low as reasonably achievable. For this end, groundwater flow on site should be evaluated based on characterization of the hydrogeology of a site of concern. This paper aims to provide data necessary for establishing groundwater monitoring program which is currently considered at Kori nuclear power plant 1 by characterizing groundwater flow system on the site based on the existing hydrogeological studies and related documents, and by modeling tritium transport. The results showed that the major groundwater flow direction was south-west and that most of groundwater entered a southern and eastern seas. Although the tritium plume also released into the sea, its rate was delayed by dewatering sump.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2023

Chlorine dioxide (ClO₂) is widely used for post-harvest sterilization treatment. However, there are limitations in the retail application of ClO₂ due to difficulties in handling, expensive facilities, and safety concerns. Therefore, it is necessary to develop a ClO₂ technology that can be easily applied and continuously released for a long period. In this study, a series of ClO₂ self-releasing sachets were developed. First, poly(ether-block-amide) (PEBAX) and polyethylene-glycol (PEG) composite films containing different ratios of citric acid (CA) were prepared using the solution casting method. The as-prepared PEBAX/PEG-CA composite films were evaluated using FT-IR, DSC, and TGA to confirm chemical structure and thermal properties. Subsequently, PEBAX/PEG-CA composite films were designed in the form of a sachet and NaClO₂ powder was transferred into the sachet to achieve a ClO₂ self-releasing system. The ClO₂-releasing behavior of the sachet was investigated by measuring the release amount of the gas using UV-vis. The release amount of ClO₂ increased with increasing CA contents owing to the existence of higher protons (trigger) in the polymer matrix. Further, ClO₂ gas was released for a longer time. Therefore, the as-prepared smart sachet can be tuned according to applications and packaging sizes to serve an optimal sterilization effect.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1995.10a
• /
• pp.152-156
• /
• 1995

서해 연안에 위치한 임해발전소는 지형의 특성상 천해역으로 냉각수를 방출하는데 현재까지는 시공성과 유지관리측면에서 심층방류보다 유리한 표층방류를 대부분 택하고 있다. 본 연구에서는 점차 그 중요도가 증대되는 연안환경 보호측면에서 표층방류된 냉각수의 확산거동을 심도있는 실측을 통하여 살펴보고, 이러한 표층 부력？의 거동을 전문가 해석 기법을 응용한 특성길이 혼합모형인 CORMIX3를 이용한 결과와 비교한다. (중략)

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.04a
• /
• pp.97-107
• /
• 1993

프시톤 형상에 관한 연구는 엔진의 열효율을 상승시키는데 중점을 두었으나 캘리포니아주의 환경 관련 법안을 계기로 공해 물질의 배출을 중이는 방향으로 연구가 이루어지고 있다. 즉, 실린더내의 최고 온도와 압력을 적정한 수준에서 조절하여 공해물질의 방출을 극소화시키면서 열효율을 높힐 수 있는 방안에 대한 연구를 많이 진행하고 있다. 본 논문은 유한요소법을 이용하여 저마찰 패드식 피스톤에 대한 트라이볼로지적 해석으로 피스톤의 편심에 따른 압력 분포도 해석, 마찰력과 피스톤의 동특성에 대하여 알아보고자 한다. 이들을 해석하기 위한 가장 중요한 역학적 상태량은 피스톤 표면의 압력 분포와 피스톤의 편심량이며 특히, 압력 분포 해석은 피스톤의 유막 설계시 기본이 된다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.64-65
• /
• 1994

근래 환경 문제의 중요성이 크게 대두되면서 여러 제조 공정에서 방출되는 폐수등을 처리하는데 필요한 내구성이나, 내미생물성, 내약품성이 우수한 분리막 재료에 대한 연구가 진행되고 있다. 내구성이 우수한 역삼투막 재료를 얻기 위한 방법의 하나로 엔지니어링 플라스틱을 친수화시키는 방법이 개발되어 왔다. 특히 PPO (poly(2-6-dimethyl-1,4-phenylene oxide))로 만들어진 분리막은 내산화성이 우수하고 내구성이 뛰어나다고 알려져왔고 본 연구에서는 PPO에 carboxyl기를 도입하여 친수성을 부여하고, 상전이법을 이용하여 얇은 표피층이 선택성을 높이고 다공성 구조가 표피층을 지지하도록 만든 비대칭성 구조의 분리막을 제조하고 그 투과특성을 살펴보았다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.243-244
• /
• 2002

대기 중으로 방출된 대기오염물질의 제거과정에는 주로 강수에 의한 습성침착(wet deposition)과 직접 지표면부근으로 침착하는 건성침착(dry deposition)으로 구분 할 수 있다. 습성침착의 경우 지구 환경문제의 하나로서 주목되고 있는 산성비 문제로 지금까지 국내외의 많은 보고들이 있다. 그러나 건성침착의 경우 침착현상의 복잡성 때문에 건성 침착을 평가하는 표준적인 방법은 아직 정리되어 있지 않은 실정이다. 그러나 건성침착량은 습성침착량과 거의 동등하다고 알려져 있어, 침착 대기오염물질로 인한 지표면 부근의 환경에 주는 부하량을 평가하기 위해서는 습성침착 뿐만 아니라 건성침착을 포함한 총침착물(total=wet+dry) 특성에 대한 연구가 중요하다. (중략)

• Membrane Journal
• /
• v.17 no.1
• /
• pp.67-79
• /
• 2007

Uniform microcapsules containing ionic model drugs were prepared by controlling various conditions of emulsification procedure using a lab-scale membrane emulsification system with a SPG (Shirasu porous glass) tubular membrane. We observed the effects of various emulsification parameters [concentration and molecular weight of polycaprolatone (PCL) polymer, transmembrane pressure and emulsifier concentration in disperse phase and continuous phase, stirring speed] on the mean size and size ditribution of microcapsules containing lidocaine hydrochloride (cationic drug), sodium salicylate (nonionic drug) and 4-acetaminophen (anionic drug) used as a model drugs. Also, release characteristics of a model drugs from PCL microcapsules were investigated. Controlling membrane emulsification parameters, uniform PCL microcapsules with about $5\;{\mu}m$ of the mean size were finally prepared. The release rate and the burst effect of microcapsules were decreased in condition of the acidic solution, but it was increased in condition of the base solution.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2009

This study has been focused on determining the chemical composition of $^{14}C$ - in terms of both organic and inorganic $^{14}C$ contents - in reactor coolant from 3 different PWR's reactor type. The purpose was to evaluate the characteristic of $^{14}C$ that can serve as a basis for reliable estimation of the environmental release at domestic PWR sites. $^{14}C$ is the most important nuclide in the inventory, since it contributes one of the main dose contributors in future release scenarios. The reason for this is its high mobility in the environment, biological availability and long half-life(5730yr). More recent studies - where a more detailed investigation of organic $^{14}C$ species believed to be formed in the coolant under reducing conditions have been made - show that the organic compounds not only are limited to hydrocarbons and CO. Possible organic compounds formed including formaldehyde, formic acid and acetic acid, etc. Under oxidizing conditions shows the oxidized carbon forms, possibly mainly carbon dioxide and bicarbonate forms. Measurements of organic and inorganic $^{14}C$ in various water systems were also performed. The $^{14}C$ inventory in the reactor water was found to be 3.1 GBq/kg in PWR of which less than 10% was in inorganic form. Generally, the $^{14}C$ activity in the water was divided equally between the gas- and water- phase. Even though organic $^{14}C$ compound shows that dominant species during the reactor operation, But during the releasing of $^{14}C$ from the plant stack, chemical forms of $^{14}C$ shows the different composition due to the operation conditions such as temperature, pH, volume control tank venting and shut down chemistry.

• Journal of Radiation Protection and Research
• /
• v.25 no.2
• /
• pp.75-80
• /
• 2000

The predicted results of INDAC code were compared with measured $^3H$ concentrations in air and pine-needle around the Wolsung site. The optimal sets of input data to INDAC were in addition selected by comparing the measured values with the predicted values of INDAC based on various conditions such as the release modes of effluents into the environment, the classification of wind classes, and the consideration of terrain. The predicted $^3H$ concentrations in air and pine-needle were shown to have good agreement with measured values, although there are some limitations such as uncertainties in measured values, complex topology around the site, and the land-sea breeze effects. The assumption on the $^3H$ behavior in vegetables or plants that the ratio of $^3H$ concentration in plant water to $^3H$ concentration in atmospheric water is 1/2 was shown to be conservative in terms of the audit calculation performed by the regulator. It was also found that data sets based on mixed mode and no terrain data were not appropriate for the audit calculation ensuring the compliance with regulations. Thus, if the mixed mode is considered as the release mode of effluents into the environment, meteorological data measured at 58 m height and terrain data should be used to evaluate the atmospheric dispersion factor.