• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.344-352
• /
• 2020

Covertness and performance are very important design goals in the underwater communications. To satisfy both of them, we proposed efficient underwater communication model which combined multiband and direct sequence spread spectrum method in order to improve performance and covertness simultaneously. Turbo coding method with 1/3 coding rates is used for channel coding algorithm, and turbo equalization method which iterately exchange probabilistic information between equalizer and decoder is used for receiver side. After optimal threshold value was set in Rake processing, this paper analyzed the performance by varying the number of chips were 8, 16, 32 and the number of bands were from 1 to 4. Through the simulation results, we confirmed that the performance improvement was obtained by increasing the number of bands and chips. 2~3 dB of performance gain was obtained when the number of chips were increased in same number of bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.858-867
• /
• 2011

In this paper, we propose a microwave radiometer for remote sensing of oil spills on the water surface. In order to achieve the development aim of the measurement accuracy within 0.2 mm for oil slicks of 0~4 mm thickness, the requirements of the microwave radiometer and the specifications of its receiver are drawn. From these requirements and specifications, the receiver with high gain, high sensitivity is designed and implemented. The receiver has the bandwidth of 58 MHz, the system gain of 47.3 dB and the sensitivity of 0.46 K at 10.65 GHz. The processes of design and implementation of the receiver are described in this paper. The effectiveness of the proposed microwave radiometer in the measurement of oil slicks is demonstrated experimentally. The results show the microwave radiometer can detect the oil slicks for 0~5 mm thickness within the accuracy of 0.13 mm successfully.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.835-842
• /
• 2004

In this paper, we have analyzed the MC-DS/CDMA system with input signal synchronized completely through adjustment of the gain in the PLL loop, by using the hybrid SC/MRC-(2/3) technique, which is said to one of the optimal diversity techniques under the multi-path fading environment, assuming that phase error is defined to the phase difference between the received signal from the multi-path and the reference signal in the PLL of the receiver. Also, assuming that the regarded radio channel model for the mobile communication is subject to the Nakagami-m fading channel, we have developed the expressions and performed the simulation under the consideration of various factor, in the MC/DS-CDMA system with the hybrid SC.MRC-(2/3) diversity method, such as the Nakagami fading index(m), $the\;number\;of\;paths\;(L_p),$ the number of hybrid SC.MRC-(2/3) $diversity\;branches\;(L,\;L_c),$ the number of users (K), the number of subcarriers (U), and the gain in the PLL loop. As a result of the simulation, it has been confirmed that the performance improvement of the system can be achieved by adjusting properly the PLL loop in order for the MC/DS-CDMA system with the hybrid SC/MRC-(2/3) diversity method to receive a fully synchronized signal. And the value of the gain in the PLL loop should exceed 7dB in order for the system to receive the signal with prefect synchronization, even though there might be a slight difference according to the values of the fading index and the spread processing gain of the subcarrier.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.239-250
• /
• 2003

The reliability degradation phenomena in the SiGe hetero-junction bipolar transistor (HBT) are investigated in this review. In the case of the SiGe HBT the decrease of the current gain, the degradation of the AC characteristics, and the offset voltage are frequently observed, which are attributed to the emitter-base reverse bias voltage stress, the transient enhanced diffusion, and the deterioration of the base-collector junction due to the fluctuation in fabrication process, respectively. The reverse-bias stress on the emitter-base junction causes the recombination current to rise, increasing the base current and degrading the current gain, because hot carriers formed by the high electric field at the junction periphery generate charged traps at the silicon-oxide interface and within the oxide region. Because of the enhanced diffusion of the dopants in the intrinsic base induced by the extrinsic base implantation, the shorter distance between the emitter-base junction and the extrinsic base than a critical measure leads to the reduction of the cut-off frequency ($f_t$) of the device. If the energy of the extrinsic base implantation is insufficient, the turn-on voltage of the collector-base junction becomes low, in the result, the offset voltage appears on the current-voltage curve.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.417-426
• /
• 2000

In this paper, CE-CPSK(Constant Envelope Continuous Phase Shift Keying) modulated DS/SS(Direct Sequence Spread Spectrum) transceiver with 908 MHz carrier frequency and 1.5 MHz PN clock rate is proposed. To overcome the effect of nun-linear power amplifier, CE-CPSK modulation method which has the constant envelope and continuous phase characteristics is proposed. To analyze the DS/SS receiver performance with respect to code tracking loop, multipath fading channel is characterized as a two-ray Rayleigh fading channel. To compensate the demerit of analog delay locked loop, digital delay locked loop is employed for code tracking loop. Simulation and experimental examination has been carried out in AWGN(Additive White Gaussian Noise) and Rayleigh fading channel environment in order to prove validity of the proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.195-201
• /
• 2006

In multicarrier code division multiple access(MC-CDMA), the total system bandwidth is divided into a number of sub-bands, where each subband may use direct-sequence(DS) spreading and each subband signal is transmitted using a subcarrier frequency. In this paper, the system performance analysis of MC-CDMA using to gain combining(EGC) and maximal ratio combining(MRC) method over frequency selective Nakagami-m fading channel is analyzed. In the proposed system, a data sequence is serial-to-parallel converted, and MC-CDMA is used on each of the parallel data streams. The data streams are spread at both the symbol fraction level and at the chip level by the transmitter. In this paper, the compare to analysis,two standard diversity combining techniques, EGC and MRC, The good performance of system using to MRC more than EGC

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.1-11
• /
• 2012

The multi-code spread spectrum communication system, which spreads data bit stream by multiplexing orthogonal codes, can transmit data in high rate. However it needs the high-cost good linear amplifier because of the multi-level output signal. In order to overcome this drawback several systems making the amplitude of output signal constant with Walsh codes have been proposed. Recently constant amplitude pre-coded multi-code spread spectrum systems using extended m-sequence have been proposed. In this paper we consider an extended m-sequence based constant amplitude multi-code spread spectrum system with code set partitioning. By grouping the orthogonal codes into 4 subsets, not only is the computational complexity of the transceiver reduced but BER performance also improves. It has been shown that parity checking on four detected codes at the receiver can correct code detection error and result in BER performance enhancement. In this paper we propose a improved parity check receiver. We carried out computer simulation to verify feasibility of the proposed algorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.110-118
• /
• 2009

The PB/MC-CDMA(Partial Block Multi Carrier Code Division Multilple Access) system can improve the performance by reducing the ICI(Inter-Code Interference) between users. Also, this system can achieve the frequency diversity gain by avoiding ISI(Inter Symbol Interference). Therefore, the performance of PB/MC-CDMA system is better than that of conventional MC-CDMA(Multi Carrier Code Division Multiple Access) system. However, similarly to other multi-carrier systems, it still has a PAPR(Peak to Average Power Ratio) issue. In this paper, we propose a peak power reduction technique involving optimized spreading code selection without side information for the PB/MC-CDMA. The PB/MC-CDMA system in each block of units reuses the code so the extra code will be remained. This extra code is divided into several groups to calculate the PAPR and solving the PAPR problem by transferring the selected code which has minimum peak power.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.34-43
• /
• 1999

A high-speed image processor (HIP) is implemented for a high-speed multi-function peripheral. HIP has a binarization architecture with unified data path. It has the pixel-by-pixel pipelined processing to minimize size of the external memory. It performs pre-processing such as shading correction, automatic gain control (AGC), and gamma correction, and also drives external CCD or CIS modules. The pre-processed data can be enlarged or reduced. Various binarizatin algorithms can be processed in the unified archiecture. The embedded binarization algorithms are simple thresholding, high pass filtering, dithering, error diffusion, and thershold modulated error diffusion. These binarization algorithms are unified based on th threshold modulated error diffusion. The data path is designed to share the common functional block of the binarization algorithms. The complexity of the controls and the gate counts is greatly reduced with this novel architecture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.231-241
• /
• 2004

This paper drives the exact expression of bit error rate(BER) performance for groupwise iterative-multipath interference cancellation(GWI-MPIC) algorithm for cancelling multipath interference components in a coherent high-speed downlink packet access(HSDPA) system of W-CDMA downlink and the BER performance is evaluated by numerical analysis. The performance of GWI-MPIC is compared to the successive interference cancellation(SIC) algorithm for multipath components. From numerical results, the optimal average BER performance of weighting factor ${\beta}$$\_$h/ for interference cancellation is obtained at ‘${\beta}$$\_$h/=0.8’ and then this weighting factor is hereafter applied to other performance analysis. Numerical results showed that the average BER performance of GWI-MPIC algorithm is rapidly degraded at multipath L=6, but is revealed the good performance than that of SIC algorithm in terms of increasing the number of multipath. This results also indicated that the average BER performance is greatly degraded due to increasing interference power more than multicode K=8. The average BER performance of the proposed algorithm is superior to the performance of SIC algorithm about 3 ㏈ for processing gain PG=128 at multipath L=2 and Average BER=1.0${\times}$10$\^$-5/. And also, the results produced good performance in case of linear monotonic reduction of multipath fading channel gain than that of constant channel gain variation, because multipath fading channel gain which is arrived later is small.