• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.93-102
• /
• 2020

This study investigated the dif usion characteristics of Ecklonia cava spores around marine forest reefs. For this purpose, a numerical analysis was conducted using field observations in the target area and an EFDC model. Based on the results of field observations and the EFDC model, Flow-3D was performed on three types of marine forest reefs, mamely triangular pyramid reef, double-dome reef, and ribbed reef, to monitor the movement direction and maximum movement distance for E. cava spores. As a result, the equilaterally triangular pyramid reef and double-domed reef were found to have a maximum settlement of spores of 10 m in the northwestern direction and 6 m in the western direction. The ribbed reef had a maximum settlement of spores at 4m. These results show that consideration of the diffusion characteristics of E. cava spores when the seaweeds are installed can increase the effectiveness of the algae as substrate of adhesion.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.89-89
• /
• 2019

수환경으로 유출되는 유해화학물질은 독성을 가지고 직접 유출되거나 다양한 매체와 반응하여 화재 및 폭발 등의 사고가 발생한다. 실제로 낙동강 유역에서는 1991년 페놀 유출사고를 시작으로 2009년 구미공단 '1,4-다이옥산' 유출사고, 2014년 11월 경북 봉화군의 황산유출사고 등 크고 작은 사고가 빈번히 발생하고 있으며 작년 6월에는 대구와 부산의 수돗물에서 과불화화합물이 검출되기도 하였다. 이러한 대규모 사고를 방지하기 위해 신속한 오염물의 거동 예측이 가능한 추적모델이 필요하며, 본 연구에서는 수환경으로 유출된 유해화학물질의 추적을 위한 1차원 저장대 모형을 개발하였다. 일반적으로 저장대 모형은 복잡한 하천 구조를 하천의 주 흐름이 존재하는 본류대와 하천 흐름이 정체되는 저장대, 그리고 하상구조로 단순화 하여 나타낸다. 본류대에서는 하천흐름에 의한 이송 및 횡방향 유속차로 발생하는 전단류에 의한 확산이 일어나며, 저장대와의 물질교환으로 발생하는 저장효과와, 하상구조와의 흡착 및 탈착, 그리고 생물화학적 반응 및 휘발이 발생한다고 가정한다. 본류대와 저장대간의 질량교환은 난류유속변동과 농도차에 의해서만 발생한다고 가정하고 오염물질의 이송과 분산과정을 해석한다. 저장대에서는 이송 및 전단류에 의한 확산은 일어나지 않으며, 본류대와의 물질교환으로 발생하는 저장효과와 하상구조로의 흡착, 그리고 생물화학적 반응 및 휘발이 발생한다고 가정하며, 하상구조에서는 본류대 및 저장대와의 흡착 및 탈착만 발생한다고 가정한다. 저장대 모형의 해석을 위해서는 리치(Reach) 별로 본류대 분산계수($K_F$), 본류대 면적($A_F$), 저장대 면적($A_S$), 그리고 저장대 교환계수(${\alpha}$)의 네 가지 저장대 매개변수가 필요하며 본 연구에서 개발된 저장대 모형은 흡탈착, 생물화학적 반응 및 휘발 과정을 모두 고려하여 유해화학물질의 확산 거동을 모의한다. 최적의 리치길이, 흡탈착, 반응 및 휘발 계수를 산정하여 모형의 정확도를 향상시켰으며, 신속하고 정확하게 오염물의 거동을 예측할 수 있었다.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.22-27
• /
• 2018

The flame length in coaxial diffusion flame configurations was investigated when the kerosene fuel flow rate, temperature of the oxidizer stream, and inert gas concentrations in the oxidizer stream were varied. The diffusion flame was photographed using a Schlieren camera under each of the experimental conditions and the obtained images were then digitized to measure the flame length. The measured flame lengths were proportional to the kerosene fuel flow rate and increased with increasing temperature of the oxidizer stream. In addition, increases in the inert gas concentration in the oxidizer stream resulted in stretching of the flame. In particular, the flame was further elongated in the oxidizer steam diluted with helium gas. Inert substitutions in the oxidizer stream that can adjust the viscous drag are believed to be one of the important mechanisms that affect the length of the coaxial diffusion flames.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.55-64
• /
• 2017

In order to assess the spatial and dynamic changes in bamboo forests, this study used the national-level spatial data between 1980 and 2010 to extract spatial information of bamboo forests through GIS technology. The results showed that the distribution types were mainly expansion, normal, mixed, damage, and separation. In case of mixed bamboo forest in the Sacheon region, the expansion characteristics were: area 2.5 ha, velocity 0.08 ha/yr, and distance 1.1 m/yr. The Phyllostachys pubescens forest in the Geojae region showed the following characteristics: area 1.9 ha, velocity 0.06 ha/yr, and distance 0.9 m/yr with where along from valley to ridge. This approach could provide a valuable tool for decision-making and implementations such as the bamboo forest management plan, environmental impact assessment for a preventing the bamboo expansion, and sustainable managing the bamboo resources.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.2
• /
• pp.103-118
• /
• 2004

In Cheongsong area, very rare spherulitic rhyolites both in Korea and foreign countries occur as dykes showing various types. The spherulites in them represent an undercooling caused by very fast cooling of the dykes in a shallow depth near to the surface and the variety of types were resulted from the difference of relative cooling rate. Cheongsong spherulitic rhyolites can be classified into five types; radiated simple spherulite, layered simple spherulite, layered multiple spherulite, radiated-layered multiple spherulite, radiating layered multiple spherulite. Radiated simple and radiating layered multiple spherulites formed by diffusion current caused by undercooling related to very fast cooling. On the other hand, layered multiple spherulites formed by relatively slow diffusion as a Liesegang ring during relatively slow cooling. If the cooling rate is between the two cases, layered simple spherulites formed. This interpretation indicates that Chrysanthemum, Dandelion, Dahlia and Sunflower types which are included in radiated simple or radiating layered multiple spherulites formed in the dykes with the fastest cooling rate in Cheongsong area while Peony, Rose and Innominate types classified as layered multiple spherulite formed in the dykes with the relatively slowest cooling rate. At the cooling rate between them, Apricot type spherulite formed. The K-Ar age-dating for Cheongsong spherulitic rhyolites indicate them to be formed between 48 and 50 Ma. The Cheongsong rhyolites are very valuable for research and preservation because of their rarity, beauty and diversity.

• Ecology and Resilient Infrastructure
• /
• v.9 no.3
• /
• pp.141-153
• /
• 2022

In this study, a numerical model of debris flow considering driftwood and entrainment erosion is developed. Subsequently, numerical simulations based on the observation data of the 2011 Mt. Umyeon are performed. To develop the debris flow model, the Nays2DFlood model, which is a flooding model based on the shallow water equation, is coupled with the transport diffusion of mixed sediment concentration, debris flow bottom shear stress, and entrainment erosion modules. The simulation closely reproduced the depth, flow velocity, and debris flow volume of Mt. Umyeon. In addition, the reproducibility of the simulation result with driftwood is more accurate than that without driftwood. The results of this study can facilitate in establishing measures to reduce debris disasters, thus alleviating the current increase in debris damage due to climate change.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.4
• /
• pp.189-197
• /
• 2017

The development and application of accurate numerical models is essential to promptly respond to early stage of oil spill incidents occurring in nearshore area. In this study, the coupled modelling system was developed by integrating the advection-diffusion-transformation model for oil slick with the Boussinesq model, which incorporates non-linear, discrete, turbulent and rotational effects of wavy flows for accurate representation of nearshore hydrodynamics. The developed model examined its applicability through the application into real coastal region with topographical complexity and characteristics of the resulting flow originated from it. The highly-resolved, coupled model developed in this study is believed to assist in establishing the disaster prevention system that can prepare effectively for oil disasters under extreme ocean climate conditions and thus minimize industrial, economical, and environmental damages.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.10
• /
• pp.694-701
• /
• 1988

Distributed-type railguns are designed to maintain the armature current and the length between the armature and the current-feed region nearly constant with time. This paper deals with factors affecting current distribution, effective resistance and effective skin depth in the rail of a distributed-type railgun. Analytical solutions for the current distributions and resistance in the rail are presented for a simple two-dimensional model under steady-state contions. For diffusion limited current, it is found that effective rail resistance is proportional to the square root of the relative velocity, the permeability of the rail and the length between the armature and that effective skin depth of the rail is proportional to the square root of the length and inversely proportional to the square root of the permeability, the conductivity and the velocity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.65-65
• /
• 2000

반도체 소자의 고집적화는 배선에서 많은 문제점을 야기 시킨다. 이러한 문제점들 중에서 대표적인 것이 과도한 전류밀도에 의한 electro-migration(EM)이다. 이는 앞으로 배선의 선폭이 0.25$mu extrm{m}$미만일 경우 더욱 심화될 전망이다. 이에 대안으로 Al-합금에서 Cu로 대체하여 이러한 문제를 해결하려 하고 있다. 그런데, Cu는 Si 및 SiO2와 높은 반응성과 빠른 확산속도를 가지기 때문에 확산방지막이 필요로 되어진다. 현재에는 TiN, TaN 등의 확산방지막이 사용되어지고 있으나, TiN 박막의 경우 표면에 Ti와 oxide와의 결합에 의해 Ti-O 성분이 존재하는데, 이럴 경우 Cu 증착을 하는데 있어 부정적인 요인이 된다. 또한, 이러한 화합물은 Cu와 TiN 계면사이에 밀착성을 나쁘게 하여 고전류 인가시 EM에 있어 높은 저항성을 가질 수가 없다. 따라서, 본 연구는 MOCVD방식으로 Cu 박막을 증착하기에 앞서 수소플라즈마를 이용하여 TiN 표면에 형성된 산소 화합물을 제거한 후 Cu를 증착하여 동일한 조건에서 EM 가속화 실험을 하였다. 그림 1은 Cu/TiN 구조에 있어 수소 전처리를 한 배선의 구조의 MTF(mean time to failure)가 65분이고 전처리를 하지 않은 배선구조는 40분으로 약 50% 긴 MTF를 가지는 것으로 나왔다. 결론적으로 Cu와 TiN 계면에 좋은 밀착성은 EM에 있어 우수한 저항성을 가지는 것으로 나왔다.

• Water for future
• /
• v.22 no.4
• /
• pp.453-461
• /
• 1989

The analytical diffusion model is first formulated and its characteristics are critically reviewed. The flood events during the 1986-1988 flood seasons i the IHP Pyungchang Representative Basin are routed by this model and are compared with those by the kinematic wave model. The results showed that the analytical diffusion model simulates the observed flood events much better than the analytical kinematic wave model. The present model is proven to be an excellent means of taking the backwater effect due to lateral inflow or down river stage variations into consideration in channel routing of flood flows. It also requires much less effort and computing time at a desired station compared to any other reliable flood routing methods.