• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.4
• /
• pp.279-285
• /
• 2010

In the process of the probabilistic-based design on the coastal structures, the probability density function (pdf) of tidal elevation data is assumed as the normal distribution function. The pdf shape of tidal elevation data, however, is better-fitted to the double-peak normal distribution function and the equivalent mean and standard deviation (SD) estimation process based on the equivalent normal distribution is required. The equivalent mean and SD (equivalent parameters) are different with the mean and SD (normal parameters) estimated in the condition that the pdf of tidal elevation is normal distribution. In this study, the difference, i.e., estimation error, between equivalent parameters and normal parameters is compared and analysed. The difference is increased as the tidal elevation and its range are increased. The mean and SD differences in the condition of the tidal elevation is ${\pm}400cm$ are above 100 cm and about 80~100 cm, respectively, in Incheon station. Whereas, the mean and SD differences in the condition of the tidal elevation is ${\pm}60cm$ are very small values in the range of 2~4 cm, in Pohang station.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.975-988
• /
• 2020

Change detection is the process of identifying changes by observing the multi-temporal images at different times, and it is an important technique in remote sensing using satellite images. Among the change detection methods, the unsupervised change detection technique has the advantage of extracting rapidly the change area as a binary image. However, it is difficult to understand the changing pattern of land cover in binary images. This study used grid points generated from seamless digital map to evaluate the satellite image change detection results. The land cover change results were extracted using multi-temporal KOMPSAT-3A (K3A) data taken by Gimje Free Trade Zone and change detection algorithm used Spectral Angle Mapper (SAM). Change detection results were presented as binary images using the methods Otsu, Kittler, Kapur, and Tsai among the automated threshold selection algorithms. To consider the seasonal change of vegetation in the change detection process, we used the threshold of Differenced Normalized Difference Vegetation Index (dNDVI) through the probability density function. The experimental results showed the accuracy of the Otsu and Kapur was the highest at 58.16%, and the accuracy improved to 85.47% when the seasonal effects were removed through dNDVI. The algorithm generated based on this research is considered to be an effective method for accuracy assessment and identifying changes pattern when applied to unsupervised change detection.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.573-580
• /
• 2009

This paper presents the mix composition, production method, and curing condition applied to the extruded ECC(Engineered Cementitious Composite) panel which are able to exhibit multiple cracking and potential pseudo strain-hardening behavior. In addition to the production technique of extruded ECC panel, the effect of fiber distribution characteristics, which are uniquely created by applying extrusion process, on the flexural behavior of the panel is also focussed. In order to demonstrate fiber distribution, a series of experiments and analyses, including image processing/analysis and micro-mechanical analysis, was performed. The optimum mix composition of extruded ECC panel was determined in terms of water matrix ratio, the amount of cement, ECC powder, and silica powder. It was found that flexural behavior of extruded ECC panel was highly affected by the slight difference in mix composition of ECC panel. This is mainly because the difference in mix composition results in the change of micro-mechanical properties as well as fiber distribution characteristics, represented by fiber dispersion and orientation. In terms of the average fiber orientation, the fiber distribution was found to be similar to the assumption of two dimensional random distribution, irrespective of mix composition. In contrast, the probability density function for fiber orientation was measured to be quite different depending on the mix composition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.429-437
• /
• 2008

Multiple-input multiple-output (MIMO) techniques can be used for the spectral efficiency enhancement of the cellular systems, which can be categorized into spatial multiplexing (SM) and spatial diversity schemes. MIMO systems suffer a severe performance degradation due to the intercell interference from the adjacent cells as the mobile terminal moves toward the cell boundary. Therefore for the spectral efficiency enhancement, an appropriate transmission scheme for the given channel environment and reception scheme which can mitigate the intercell interference are required. In this paper, we propose an adaptive signal transmission/reception scheme for the spectral efficiency improvement of $M_R{\times}M_T$ MIMO systems, present the decision criteria for the adaptive operation of the proposed scheme, and demonstrate the performance gain. The proposed scheme performs adaptive transmission using spatial multiplexing and spatial diversity, and adaptive reception using maximal ratio combining (MRC) and intercell spatial demultiplexing (ISD) when the spatial diversity transmission is used at the transmitter. Spatial multiplexing/demultiplexing is performed at the high signal-to-interference ratio (SIR) range, and the transmit diversity in conjunction with the adaptive reception uses either conventional MRC or ISD which can mitigate the $M_R-1$ interference signals, based on the mobile location. For the performance evaluation of the proposed adaptive scheme, the probability density function (pdf) of the effective SIR for the transmission/reception methods in consideration are derived for $M_R{\times}M_T$ MIMO systems. Using the results, the average effective SIR and spectral efficiency are presented and compared with simulation results.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.380-386
• /
• 2002

Conventional post-processing as like confidence measure (CM) proposed by Rahim calculates phones' CM using the likelihood between phoneme model and anti-model, and then word's CM is obtained by averaging phone-level CMs[1]. In conventional method, CMs of some specific keywords are tory low and they are usually rejected. The reason is that statistics of phone-level CMs are not consistent. In other words, phone-level CMs have different probability density functions (pdf) for each phone, especially sri-phone. To overcome this problem, in this paper, we propose normalized confidence measure. Our approach is to transform CM pdf of each tri-phone to the same pdf under the assumption that CM pdfs are Gaussian. For evaluating our method we use common keyword spotting system. In that system context-dependent HMM models are used for modeling keyword utterance and contort-independent HMM models are applied to non-keyword utterance. The experiment results show that the proposed NCM reduced FAR (false alarm rate) from 0.44 to 0.33 FA/KW/HR (false alarm/keyword/hour) when MDR is about 8%. It achieves 25% improvement of FAR.

• Journal of Korea Water Resources Association
• /
• v.36 no.2
• /
• pp.161-172
• /
• 2003

This study has evaluated the stream gauge network with the main emphasis on if the current stream gauge network can catch the runoff characteristics of the basin. As the evaluation of the stream gauge network in this study does not consider a special purpose of a stream gauge, nor the effect from a hydraulic structure, it becomes an optimization of current stream gauge network under the condition that each stream gauge measures the natural runoff volume. This study has been applied to the Nam-Han River Basin for the optimization of total 31 stream gauge stations using the entropy concept. Summarizing the results are as follows. (1) The unit hydrograph representing the basin response from rainfall can be transferred into a probability density function for the application of the entropy concept to optimize the stream gauge network. (2) Accurate derivation of unit hydrographs representing stream gauge sites was found the most important part for the evaluation of stream gauge network, which was assured in this research by comparing the measured and derived unit hydrographs. (3) The Nam-Han River Basin was found to need at least 28 stream gauge stations, which was derived by considering both the shape of the unit hydrograph and the runoff volume. If considering only the shape of the unit hydrograph, the number of stream gauges required decreases to 23.

• Journal of Korea Water Resources Association
• /
• v.30 no.5
• /
• pp.441-447
• /
• 1997

Rainfall observation using rain gage network or satellites includes the sampling error depending on the observation methods or plans. For example, the sampling using rain gages is continuous in time but discontinuous in space, which is nothing but the source of the sampling error. The sampling using satellites is the reverse case that continuous in space and discontinuous in time. The sampling error may be quantified by use of the temporal-spatial characteristics of rainfall and the sampling design. One of recent works on this problem was done by North and Nakamoto (1989), who derived a formulation for estimating the sampling error based on the temporal-spatial rainfall spectrum and the design scheme. The formula enables us to design an optimal rain gage network or a satellite operation plan providing the statistical characteristics of rainfall. In this paper the formula is reviewed and applied for the sampling error problems using several multi-dimensional precipitation models. The results show the limitation of the formulation, which cannot distinguish the model difference in case the model parameters can reproduce similar second order statistics of rainfall. The limitation can be improved by developing a new way to consider the higher order statistics, and eventually the probability density function (PDF) of rainfall.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.527-534
• /
• 2019

Several types of mathematical analysis methods are used for port waterway risk assessment based on marine traffic volume. In Korea, a marine traffic congestion model that standardizes the size of the vessels passing through the port waterway is applied to evaluate the risk of the waterway. For example, when marine traffic congestion is high, risk situations such as collisions are likely to occur. However, a scientific review is required to determine if there is a correlation between high density of maritime traffic and a high risk of waterway incidents. In this study, IWRAP Mk2(IALA official recommendation evaluation model) and a marine traffic congestion model were used to analyze the correlation between port waterway risk and marine traffic congestion in the same area. As a result, the linear function of R2 was calculated as 0.943 and it was determined to be significant. The Pearson correlation coefficient was calculated as 0.971, indicating a strong positive correlation. It was confirmed that the port waterway risk and the marine traffic congestion have a strong correlation due to the influence of the common input variables of each model. It is expected that these results will be used in the development of advanced models for the prediction of port waterway risk assessment.

• Journal of Environmental Health Sciences
• /
• v.45 no.5
• /
• pp.497-510
• /
• 2019

Objectives: The aim of this study was to secure the reliability of using the CalTOX model when evaluating LADD (or ADD) and Risk (or HQ) among local residents for the emission of BTEX (Benzene, Toluene, Ethylbenzene, Xylene) and by closely examining the difference in the confidence interval of the assessment outcomes according to the difference in the probability density function of input variables. Methods: The assessment was made by dividing it according to the method ($I^{\dagger}$) of inputting the probability density function in meteorological variables of the model with log-normal distribution and the method of inputting ($II^{\ddagger}$) after grasping the optimal probability density function using @Risk. A T-test was carried out in order to analyze the difference in confidence interval of the two assessment results. Results: It was evaluated to be 1.46E-03 mg/kg-d in LADD of Benzene, 1.96E-04 mg/kg-d in ADD of Toluene, 8.15E-05 mg/kg-d in ADD of Ethylbenzene, and 2.30E-04 mg/kg-d in ADD of Xylene. As for the predicted confidence interval in LADD and ADD, there was a significant difference between the $I^{\dagger}$ and $II^{\ddagger}$ methods in $LADD_{Inhalation}$ for Benzene, and in $ADD_{Inhalation}$ and ADD for Toluene and Xylene. It appeared to be 3.58E-05 for risk in Benzene, 3.78E-03 for HQ in Toluene, 1.48E-03 for HQ in Ethylbenzene, and 3.77E-03 for HQ in Xylene. As a result of the HQ in Toluene and Xylene, the difference in confidence interval between the $I^{\dagger}$ and $II^{\ddagger}$ methods was shown to be significant. Conclusions: The human risk assessment for BTEX was made by dividing it into the method ($I^{\dagger}$) of inputting the probability density function of meteorological variables for the CalTOX model with log-normal distribution, and the method of inputting ($II^{\ddagger}$) after grasping the optimal probability density function using @Risk. As a result, it was identified that Risk (or HQ) is the same, but that there is a significant difference in the confidence interval of Risk (or HQ) between the $I^{\dagger}$ and $II^{\ddagger}$ methods.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.176-186
• /
• 2020

The size and shape of crops are diverse, and the growing environment is also different. Therefore, when one uses a drone to spray pesticides, the characteristics of each crop must be considered, and flight conditions such as the flight height and forwarding velocity of the drone should be changed. The droplet flow of pesticides is affected by various flight conditions, and a large change occurs in the sprayed area. As a result, an uneven distribution of liquid may be formed at the wake, and the transport efficiency will be decreased as well as there would be a risk of toxic scatter. Therefore, this paper analyzes the degree of distribution of pesticides to the crops through numerical analysis when pesticide is sprayed onto the selected three crops with different characteristics by using agricultural drones with different flight conditions. On the purpose of establishing a guideline for spraying pesticides using a drone in accordance with the characteristics of crops, this paper compares the amount of pesticides distributed in the crops at the wake of nozzle flow using the figure of merit, and the sum of transported liquid rate divided by the root mean square of the probability density function.