• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.4
• /
• pp.180-187
• /
• 2005

Nine chemolithoautotrophic and 12 chemolithoheterotrophic sulfur oxidizing bacteria were isolated using enrichment technique in modified Starkey's medium. All isolates reduced pH of the growth medium through oxidation of elementai sulfur to sulfuric acid. Isolates utilized the thiosulfate as energy source except LCH. None of the isolates grew anaerobically and utilization of glucose was found only in chemolithoheterotrophic isolates SGA6 and JIG. In vitro sulfate production from elemental sulfur was found maximum for chemoiithoautotroph LCH ($43.2mg\;100\;mL^{-1}$) and least for chemolithoheterotroph JIG ($10.04mg\;100\;mL^{-1}$). The above tests suggested that all isolates belong to the member of Thiobacillus. For field inoculation of Thiobacillus, clay based pellet formulation was developed with the cell load of $2.5{\times}10^7cfu\;g^{-1}$ of pellet. It is easy to handle by the farmers and more likely to lead to successful farming.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.67-71
• /
• 2021

In this study, graphene layer was grown on metal microwire using chemical vapor deposition. The difference of carbon solubility between copper and nickel resulted in the formation of mono-layer and multi-layer graphene were formed on the surfaces of copper and nickel microwires, respectively. During the growth of graphene at high temperature, copper and nickel were recrytallized and the grain size increased. The ampacity of graphene/copper microwire was improved by approximately 27%, 1.91×105 A/㎠, compared to pristine copper microwire. Similar to this behavior, the ampacity of multilayer graphene/nickel microwire was 4.41×104 A/㎠ which is about about 36% improved compared to the pure nickel microwire. The excellent electrical properties of graphene/metal composites are beneficial for supplying the electrical energy to the high-power electronic devices and equipment.

• Journal of Adhesion and Interface
• /
• v.21 no.4
• /
• pp.156-161
• /
• 2020

Waterborne pressure sensitive adhesives (PSA) has been received much attentions from both academia and industries as an environmental friendly-technology because it can significantly reduce use of hazardous organic volatile solvents. However, in the process of the mass production of waterborne PSAs, hazardous phenol type amphiphilic compounds have essentially been used as surfactants for the emulsion polymerization. For the reason, tremendous research efforts have been made to develop environment-friendly organic surfactant which can replace the phenol type surfactants. In this study, we verify the potential of a new class of surfactants based on the styrenated phenol derivatives as an alternative to the phenol type surfactants.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.4
• /
• pp.225-230
• /
• 2011

CIGS solar cells are kind of thin film solar cells, which are studied several years. CdS buffer layer that makes heterojunction between window layer and absorbing layer was one of issue in the CIGS solar cell study. New types of buffer layer consisted of indium sulfide are being studied these days owing to high price and environmental harmful of CdS. In this study, we demonstrated electrochemical synthesis of indium sulfide film as a buffer layer, which is cheaper and faster than other methods. A uniform indium sulfide film was obtained by applying two different alternating potentials. The band gap of the film was optimized by controlling temperature during the electrochemical synthesis. Using x-ray photoelectron spectroscopy and diffraction method we confirmed that ${\beta}$-indium sulfide was formed on ITO electrode surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.462-462
• /
• 2009

$CeO_2$는 고체 산화물 연료전지 (SOFC, soild oxide fuel cell)의 전해질 재료와 CMP(Chemical Mechanical Polishing) 슬러리 재료, 자동차의 3원 촉매, gas sensor, UV absorbent등 여러 분야에서 사용되고 있다. 본 연구에서는 위의 활용범위 외에 $CeO_2$의 구조적 안정성과 빠른 $Ce^{3+}/Ce^{4+}$의 전환 특성을 이용하여 lithium ion battery의 anode 재료로서 전기화학적 특성을 알아보고자 실험을 실시하였다. $CeO_2$ 합성에 사용되는 전구체인 cerium carbonate의 형상 및 크기, 비표면적과 같은 물리화학적 특성이 $CeO_2$ 분말의 특성에 직접적인 영향을 주기 때문에 전구체의 합성 단계에서 입자의 특성을 조절하였다. 전구체 합성의 출발원료로 cerium nitrate hexahydrate 와 ammonium carbonate를 사용하였고 반응온도 및 농도 등을 변화시켜 입자의 형상 및 결정상을 fiber형태의 orthorombic $Ce_2O(CO_3)_2{\cdot}H_2O$와 구형의 hexagonal $CeCO_3OH$의 세리아 전구체를 합성하였다. 이를 $300^{\circ}C$에서 30분 동안 하소하여 전구체의 입자형상을 유지하는 cubic $CeO_2$를 합성하고 X-ray diffraction, FE-SEM, micropore physisorption analyzer 분석을 통하여 입자의 결정상과 형상, 비표면적 등을 비교 분석하고 $Li/CeO_2$ couple의 충,방전 용량과 수명특성을 비교 분석하여 $CeO_2$의 전기화학적 특성을 알아보았다.

• Journal of the Korean Chemical Society
• /
• v.62 no.1
• /
• pp.19-23
• /
• 2018

The methylated metabolites of quercetin, rhamnazin and ombuin are highly likely to develop as anticancer and anti-inflammatory agents. In this study, we synthesized rhamnazin through selective methylation of quercetin hydroxyl group, which has not been reported so far. In addition, a new synthetic method was developed to correct the problems of previous synthetic method of ombuin, one of the methylated metabolites of quercetin.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1037-1041
• /
• 2004

공액계 유기가교로서 butadiene을 사용한 이핵 유기금속착체를 합성하였고, 합성된 유기금속착체 화합물에 대한 구조적 특징과 두 금속간의 전기화학적 특성에 관한 연구를 수행하였다. $[Cp*Fe(CO)_2]_2-({\mu}-CH=CH-CH=CH)$ 착체는 $Cp*(CO)_2$FeK와 cis-3,4-dichlorocyclobutene과의 반응으로 합성하였고, 이 착체에 결합된 CO기는 UV 광반응하에서 $PPh_3$로 치환시켜 $[Cp*Fe(CO(PPh)_3]_2-({\mu}-CH=CH-CH=CH)$를 합성하였다. 합성된 착체에 대한 전기화학적 특성을 파악하기 위해 CV 실험결과, 전위차 ${\Delta}E^{\circ}=0.575{\sim}0.605$ V이고 $K_c$값은 $109{\sim}1010$으로 매우 큰 값을 얻음으로서 두 금속간의 상호작용이 탄화수소사슬을 통해 활발하게 이루어지고 있음을 알수가 있었다.

• Journal of the Korean Chemical Society
• /
• v.44 no.3
• /
• pp.229-236
• /
• 2000

The reaction of 6-chloro-2-hydrazinoquinoxaline 4.oxide(10) with acetylacetone or dibenzoylmethane gave 6-chloro-2-(3,5-disubstituted pyrazol-1-yl)quinoxaline 4-oxides (11) through the intramolecular·cyclization.The chlorination of compound 11 with phosphoryl chloride afforded 3,6-dichloro-2-(3,5-disubstituted pyrazol-1-yl)quinoxalines (12), whose reaction with hydrazine hydrate provided 6-chloro-3-hydrazinodehydes, benzenesulfonyl chloride, substituted benzoyl chlohdes or acyl chlorides gave novel pyrazolylquinoxalines (14-17).

• Journal of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.149-155
• /
• 1988

Pentasil zeolites, including ZSM-5, ZSM-8, ZSM-11 and silicalites, were synthesized using various organic cations. Synthesis run was carried out in a Parr pressure reactor of $2{\ell}$ capacity and a self-constructed reactor with a magnetic stirring system. The reactant materials used are colloidal silica (Snowtex), sodium aluminate, sodium chloride, TEA, TPA, TBA, Choline and water. The composition of starting materials and the reaction temperature were found to be important factors for the synthesis of uniform pentasil zeolites.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.407-413
• /
• 2022

This study demonstrates a method for synthesis of amine functionalized and easily size controllable silica nanoparticles through biomimetic polyamine complex. First, we generate a polyamine nanocomplex composed of polyallylamine hydrochloride (PAH) and phosphate ion (pi) to synthesize silica nanoparticles. The size of polyamine nanocomplex is reversibly adjusted within the range of about 50 to 300 nm according to the pH conditions. Amine groups of the PAH in the nanocomplex catalyzes the condensation reaction of silicic acid. As a results, silica nanoparticles are synthesized based on nanocomplex in a very short time. Finally, we synthesize silica nanoparticles with various sizes according to the pH conditions. In the process of synthesizing silica nanoparticles, polyamine chains that act as catalysts are incorporated into the inside and surface of the particles, subsequently, amine groups are exposed on the surface of silica nanoparticles. As a results, the synthesis and surface modification of silica nanoparticles are performed simultaneously, and the silica nanoparticles introduced with amine groups can be easily synthesized by adjusting the sizes of the silica nanoparticles. Finally, we demonstrate the synthesis of functional silica nanoparticles in a short time under milder conditions than the conventional synthetic method. Furthermore, this method can be applicable to bioengineering and materials fields.