• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.3
• /
• pp.140-151
• /
• 1999

Groundwater samples from the southern area composed of andesitic rocks and the northwestern area composed of granite in Pusan city, have been collected and analyzed. According to the Piper diagram. groundwater in the southern area belongs to Ca$\^$2＋/－HCO$_3$$\^$－/ and Ca$\^$2＋/－(Cl$\^$－/＋SO$_4$$\^$2－/) types, and that in the northwestern area mostly belongs to Ca$\^$2＋/－HCO$_3$$\^$－/ type and partly Na$\^$＋/－HCO$_3$$\^$－/ type. Two factors (factor 1 and factor 2) were obtained from the result of the factor analysis in the southern area. Factor 1, consisting of Mg$\^$2＋/, Ca$\^$2＋/, Cl$\^$－/, SO$_4$$\^$2－/, NH$_4$$\^$＋/, EC and NO$_3$$\^$－/ is represented by the dissolution of Ca-plagioclase and calcite, and the influence of anthropogenic sources. Factor 2, consisting of K$\^$＋/, Na$\^$＋/. SiO$_2$, SO$_4$$\^$2－/, and HCO$_3$$\^$－/ is mainly represented by the dissolution of feldspar. Three factors were obtained from the result of the factor analysis in the northwestern area Factor 1, consisting of Na$\^$＋/, K$\^$＋/, NH$_4$$\^$＋/, Cl$\^$－/, SO$_4$$\^$2－/ and NO$_3$$\^$－/ explains dissolution of plagioclase and mica, the influence of anthropogenic sources and salt water. Factor 2, consisting of Ca$\^$2＋/ and HCO$_3$$\^$－/ explains the dissolution of Ca-plagioclase. Factor 3, consisting of Mg$\^$2＋/ and SiO$_2$, explains the dissolution of silicate minces. and contaminants. Based on the phase stability diagrams, groundwater both in the southern and in the northwestern area is mostly in equilibrium with kaolinite. Cl$\^$－/ with respect to Na$\^$＋/, Ca$\^$2＋/, Mg$\^$2＋/, K$\^$＋/, SO$_4$$\^$2－/ and HCO$_3$$\^$－/ indicates that both the northwestern area and the southern area are influenced by the salt water.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.762-767
• /
• 2009

In this study, the feasibility of using vegetable oil extracted from tropical crop seed as a biodiesel feedstock was investigated by producing biodiesel and analysing the quality parameters as a transport fuel. In order to produce biodiesel efficiently, two step reaction process(pre-treatment and transesterificaion) was required because the tropical crop oil have a high content of free fatty acids. To determine the suitable acid catalyst for the pre-esterification, three kinds of acid catalysts were tested and sulfuric acid was identified as the best catalyst. After constructing the experimental matrix based on RSM and analysing the statistical data, the optimal pre-treatment conditions were determined to be 26.7% of methanol and 0.982% of sulfuric acid. Trans-esterification experiments of the pre-esterified oil based on RSM were carried out, then discovered 1.24% of KOH catalyst and 22.76% of methanol as the optimal trans-esterification conditions. However, the quantity of KOH was higher than the previously established KOH concentration of our team. So, we carried out supplemental experiment to determine the quantity of catalyst and methanol. As a result, the optimal transesterification conditions were determined to be 0.8% of KOH and 16.13% of methanol. After trans-esterification of tropical crop oil, the produced biodiesel could meet the major quality standard specifications; 100.8% of FAME, 0.45 mgKOH/g of acid value, 0.00% of water, 0.04% of total glycerol, $4.041mm^2/s$ of kinematic viscosity(at $40^{\circ}C$).

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.206-214
• /
• 2005

Heterogeneously-catalyzed oxidation of aqueous phase trichloroethylene (TCE) over supported metal oxides has been conducted to establish an approach to eliminate ppm levels of organic compounds in water. A continuous flow reactor system was designed to effect predominant reaction parameters in determining catalytic activity of the catalysts for wet TCE decomposition as a model reaction. 5 wt.% $CoO_x/TiO_2$ catalyst exhibited a transient period in activity vs. on-stream time behavior, suggesting that the surface structure of the $CoO_x$ might be altered with on-stream hours; regardless, it is probable to be the most promising catalyst. Not only could the bare support be inactive for the wet decomposition reaction at $36^{\circ}C$, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. Very low TCE conversion appeared for $TiO_2$-supported $NiO_x$ and $CrO_x$ catalysts. Wet oxidation performance of supported Cu and Fe catalysts, obtained through an incipient wetness and ion exchange technique, was dependent primarily on the kinds of the metal oxides, in addition to the acidic solid supports and the preparation routes. 5 wt.% $FeO_x/TiO_2$ catalyst gave no activity in the oxidation reaction at $36^{\circ}C$, while 1.2 wt.% Fe-MFI was active for the wet decomposition depending on time on-stream. The noticeable difference in activity of the both catalysts suggests that the Fe oxidation states involved to catalytic redox cycle during the course of reaction play a significant role in catalyzing the wet decomposition as well as in maintaining the time on-stream activity. Based on the results of different $CoO_x$ loadings and reaction temperatures for the decomposition reaction at $36^{\circ}C$ with $CoO_x/TiO_2$, the catalyst possessed an optimal $CoO_x$ amount at which higher reaction temperatures facilitated the catalytic TCE conversion. Small amounts of the active ingredient could be dissolved by acidic leaching but such a process gave no appreciable activity loss of the $CoO_x$ catalyst.

• Proceedings of the KSEEG Conference
• /
• 2001.05b
• /
• pp.42-63
• /
• 2001

The detail survey on the Songsanri tomb site including the Muryong royal tomb was carried out during the period from May 1 , 1996 to April 30, 1997. A quantitative analysis was tried to find changes of tomb itself since the excavation. Main subjects of the survey are to find out the cause of infiltration of rain water and groundwater into the tomb and the tomb site, monitoring of the movement of tomb structure and safety, removal method of the algae inside the tomb, and air controlling system to solve high humidity condition and dew inside the tomb. For these purposes, detail survery inside and outside the tombs using a electronic distance meter and small airplane, monitoring of temperature and humidity, geophysical exploration including electrical resistivity, geomagnetic, gravity and georadar methods, drilling, measurement of physical and chemical properties of drill core and measurement of groundwater permeability were conducted. We found that the center of the subsurface tomb and the center of soil mound on ground are different 4.5 meter and 5 meter for the 5th tomb and 7th tomb, respectively. The fact has caused unequal stress on the tomb structure. In the 7th tomb (the Muryong royal tomb), 435 bricks were broken out of 6025 bricks in 1972, but 1072 bricks are broken in 1996. The break rate has been increased about 250% for just 24 years. The break rate increased about 290% in the 6th tomb. The situation in 1996 is the result for just 24 years while the situation in 1972 was the result for about 1450 years. Status of breaking of bircks represents that a severe problem is undergoing. The eastern wall of the Muryong royal tomb is moving toward inside the tomb with the rate of 2.95 mm/myr in rainy season and 1.52 mm/myr in dry season. The frontal wall shows biggest movement in the 7th tomb having a rate of 2.05 mm/myr toward the passage way. The 6th tomb shows biggest movement among the three tombs having the rate of 7.44mm/myr and 3.61mm/myr toward east for the high break rate of bricks in the 6th tomb. Georadar section of the shallow soil layer represents several faults in the top soil layer of the 5th tomb and 7th tomb. Raninwater flew through faults tnto the tomb and nearby ground and high water content in nearby ground resulted in low resistance and high humidity inside tombs. High humidity inside tomb made a good condition for algae living with high temperature and moderate light source. The 6th tomb is most severe situation and the 7th tomb is the second in terms of algae living. Artificial change of the tomb environment since the excavation, infiltration of rain water and groundwater into the tombsite and bad drainage system had resulted in dangerous status for the tomb structure. Main cause for many problems including breaking of bricks, movement of tomb walls and algae living is infiltration of rainwater and groundwater into the tomb site. Therefore, protection of the tomb site from high water content should be carried out at first. Waterproofing method includes a cover system over the tomvsith using geotextile, clay layer and geomembrane and a deep trench which is 2 meter down to the base of the 5th tomb at the north of the tomv site. Decrease and balancing of soil weight above the tomb are also needed for the sfety of tomb structures. For the algae living inside tombs, we recommend to spray K101 which developed in this study on the surface of wall and then, exposure to ultraviolet light sources for 24 hours. Air controlling system should be changed to a constant temperature and humidity system for the 6th tomb and the 7th tomb. It seems to much better to place the system at frontal room and to ciculate cold air inside tombs to solve dew problem. Above mentioned preservation methods are suggested to give least changes to tomb site and to solve the most fundmental problems. Repairing should be planned in order and some special cares are needed for the safety of tombs in reparing work. Finally, a monitoring system measuring tilting of tomb walls, water content, groundwater level, temperature and humidity is required to monitor and to evaluate the repairing work.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.391-396
• /
• 2016

The absorption efficiency of amine $CO_2$ absorbent (KoSol-5) developed by KEPCO research institute was evaluated using a 0.1 MW test bed. The performance of post-combustion technology to capture two tons of $CO_2$ per day from a slipstream of the flue gas from a 500 MW coal-fired power station was first confirmed in Korea. Also the analysis of the absorbent regeneration energy was conducted to suggest the reliable data for the KoSol-5 absorbent performance. And we tested energy reduction effects by improving the absorption tower inter-cooling system. Overall results showed that the $CO_2$ removal rate met the technical guideline ($CO_2$ removal rate : 90%) suggested by IEA-GHG. Also the regeneration energy of the KoSol-5 showed about $3.05GJ/tonCO_2$ which was about 25% reduction in the regeneration energy compared to that of using the commercial absorbent MEA (Monoethanolamine). Based on current experiments, the KoSol-5 absorbent showed high efficiency for $CO_2$ capture. It is expected that the application of KoSol-5 to commercial scale $CO_2$ capture plants could dramatically reduce $CO_2$ capture costs.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.3
• /
• pp.145-152
• /
• 2007

In this study, the antioxidative effects of Sueada asparagoides and Salicornia herbacea extracts were investigated. The free radical(1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activity($FSC_{50}$) of extract/fractions of Sueada asparagoides was in the order: 100 % ethanol extract(329.33 ${\mu}g/mL$) < 50 % ethanol extract(40.73) < ethylacetate fraction(13.87) < deglycosylated aglycone fraction (7.80). In case of Salicornia herbacea, the free radical scavenging activities of ethylacetate fraction and aglycone fraction were 13.87 and 7.80 ${\mu}g/mL$, respectively. Reactive oxygen species(ROS) scavenging activities($OSC_{50}$) of Sueada asparagoides and Solicornia herbacea extracts on ROS generated in $Fe^{3+}-EDTA/H_2O_2$ system were investigated using the luminol-dependent chemiluminescence assay. The order of ROS scavenging activity of Sueada asparagoides extracts was 50 % ethanol extract($OSC_{50}$, $0.99{\mu}g/mL$) < ethylacetate fraction (0.05) < aglycone fraction (0.03). Aglycone fraction showed the most prominent scavenging activity. In case of Salicornia herbacea, the ROS scavenging activities of ethylacetate fraction and aglycone fraction were 0.10 and 0.20 ${\mu}g/mL$, respectively. The protective effects of extract/fractions of Sueada asparagoides and Salicornia herbacea on the rose-bengal sensitized photohemolysis of human erythrocytes were investigated. The ethanol extract(100%) of Sueada asparagoides diminished photohemolysis in a concentration dependent manner($1{\sim}100{\mu}g/mL$). Particularly deglycosylated aglycone fraction exhibited the most prominent celluar protective effect($\tau_{50}$, 310 min at 50 ${\mu}g/mL$). In case of Salicornia herbacea, ethylacetate fraction exhibited more potent protective effect. These results indicate that extract/fractions of Sueada asparagoides can function as antioxidants in biological systems, particularly skin exposed to UV radiation by scavenging $^1O_2$ and other ROS, and protect cellular membranes against ROS.

• Journal of Food Hygiene and Safety
• /
• v.36 no.4
• /
• pp.316-323
• /
• 2021

A total of 106 samples (nuts, nut products, oilseeds, oilseed products, seed for beverage products) were simultaneously analyzed with LC/MS/MS method. The tested mycotoxins were aflatoxin (B₁, B₂, G₁, G₂), ochratoxin A, fumonisin (B₁, B₂), and zearalenone. Mycotoxins were detected in 37 of 106 samples (35%), and two or more mycotoxins were simultaneously detected in 9 of 106 samples (8.5%). Aflatoxin, ochratoxin A, fumonisin and zearalenone were detected at the range of 0.08-1.45 ㎍/kg, 17.29 ㎍/kg, 1.16-14.89 ㎍/kg and 0.12-12.69 ㎍/kg, respectively. The results revealed that the most frequently detected mycotoxin was zearalenone (23%), followed by aflatoxin (13%), fumonisin (8%) and ochratoxin A (1%). Detection rates of nuts and oilseeds were 35% and 33%, respectively, and detection rates of their processed foods were 44% and 46%, respectively. The detection rate of mycotoxins was 10% higher in processed foods than in nuts and oilseeds. Mycotoxins are physicochemically stable and can persist during food processing and cooking, making management of mycotoxins in raw materials a concern of high importance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.2
• /
• pp.69-80
• /
• 2023

This study investigated the differences in barley growth at different growth stages (Dec, Feb, and Apr) and the yield at harvest in three groups (G1, G2, and G3) with different climates. Additionally, we measured meteorological differences between areas during the growing season to determine which factors were related to growth and yield differences. We evaluated the chemical composition of soil and the mineral content in leaves during the heading stages. We also recorded the main constituents, amino acids, and mineral compositions of barley seeds grown in different areas. Tiller number/m² in G1 areas was higher than in G2 and G3 when measured before and after overwintering. However, tiller number/m² and dry aboveground plant parts/m² in G2 and G3 areas were higher than in G1. Regrowth, panicle formation, and heading days in G2 areas occurred slightly later than in G1 and G3. However, there was no difference in chlorophyll content (SPAD value) between groups. The yield in G1 areas was 9~15% less than in G1 and G3. The decrease in yield in G2 areas could be due to lower panicle number, spikelet number, and ripening rate. In addition, the decrease in yield in G2 areas is likely because maximum, minimum, and average daily temperatures during the growing season were lower than those in G1 and G3. However, mineral nutrients in the soil were higher in the G2 area than in G1 and G3. The overall mineral content in plants tended to be higher in G1 areas than in G2 and G3. Mineral content such as Cu, K, Mg, and P in G3 areas and crude protein and most amino acids in G2 areas tended to be relatively low compared to other areas. Thus, the G1 area may be suitable for barley cultivation without adverse impacts on barley yield, main constituents, amino acids, and mineral contents compared to the main producing areas in G3.