• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.515-522
• /
• 2011

The purpose of this study was to evaluate the material characteristics of SHN400 steel, which is suitable as a steel material for building structures, using the experimental approach. For this purpose, the chemical composition test, tensile test, macro test, micro test, and charpy notch impact test were conducted with specimens taken from the highest, thickest, and commonly used H-beams for girder or beam members. Each test was conducted under the Korean Standard(KS) test conditions. All the test results satisfied the requirements of KS (KS D 3866) and the steel material for seismic design. The carbon equivalent value (Ceq), which is related to weldability, and the yield ratio, which is related to inelastic behavior, showed especially good results. Thus, SHN400 is definitely suitable as the steel material for building structures.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.37-48
• /
• 2017

In this research, 9 SAW welding specimens with 1 hour post-heat treatment (PH1) and 2 hours (PH2) were experimented to confirm the weldability and the joint performance of 60mm thickness HSA800 steel. SAW tests with PH1 & PH2, including weld impact test, bend test, hardness test, macroscopic test, and microscopic test, had a good test results. However, from the chemical composition test results, P composition was not satisfied with Korean Industrial Standards(KS). According to the weld-zone tensile tests, 2 hours post-heat SAW is recommended because the mechanical characteristics of SAW PH2 were better than those of SAW PH1.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.219-219
• /
• 2003

찹쌀 및 가루를 사용하여 담금한 고추장(시험구 A: 찹쌀가루, 시험구 B: 찹쌀, 시험구 C: 찹쌀 및 가루의 혼용)의 화학성분, 효소력 및 texture를 측정한 결과는 다음과 같다. 수분, 조단백, 조지방, 적정산도, 무기성분, alcohol의 함량 및 PH는 시험구간에 차이가 없었다. 이미노태 질소함량과 산성 pretense 및 당화 amylase 활성은 A구가 높았고 환원당은 Brn가 경시적으로 높았다. Ca, Cu, K, Mn, Mg, P, Fe의 무기성분이 각 시험구에서 검출되었고 이중 K의 함량이 가장 높았으며 Cu, Mn, Fe는 극히 미량이었다. Aspartic acid, glutamic acid, cystine, arginia proline 등의 유리아미노산이 60일 숙성 고추장에서 양적으로 많이 검출되었고 histidine, valine의 함량은 적었으며, 유리아미노산의 총량은 A구 16.49, B구 13.68, C 구 15.84mg/g으로서 A 구가 가장 많았고 B 구의 고추장이 가장 적었다. texture를 측정한 결과 견고성과 부착성은 담금 직후에는 A구가, 숙성 후기에는 B 구가 높았으며 응집성, 탄력성은 A 구가 높았고 B 구가 낮았다.

• Proceedings of the KSEG Conference
• /
• 2001.03a
• /
• pp.15-22
• /
• 2001

퇴적암의 풍화특성을 파악하기 위해서는 풍화과정을 지배하는 암석의 광물 조성과 화학성분에 대한 연구가 필요하다. 본 논문에서는 풍화정도에 따른 퇴적암의 특성을 고찰하기 위해서 대구지역에 분포하고 있는 퇴적암을 채취하여 화학 및 광물성분 분석과 시간경과에 따른 물리 및 역학특성 시험을 실시하였다. 퇴적암에 대한 풍화판정법은 시험결과 Parker의 풍화지수식이 잘 일치하였고 모암에 함유된 $Al_2$O$_3$, CaO, $Na_2$O, $K_2$O, MgO등의 화학성분과 조장석(Albite, Ab), 백운모(Muscovite, Ms), 마그네타이트(Magenetite, Mt)등의 광물성분이 풍화와 밀접한 관계가 있었으며, 또한 암석의 풍화정도와 공학적 성질에 대한 상관관계식을 제안하였다.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.695-703
• /
• 2015

Acceptance criteria for chemical admixtures of cement concrete were investigated in domestic and international specifications. The reliability was verified for solid content test method of chemical admixture examined statistical analysis by round robin test. The applicability of FT-IR spectroscopy for qualitative measurement of multi-compound chemical admixtures verified. From solid content experimental results, outlier analysed using Cochran, Grubbs and Dickson's Q test. Repeatability and reproducibility standard deviation for solid content results showed 0.25 and 0.098% respectively according to KS A ISO 5725-2 procedure, it can be confirmed reliability of test methods. FT-IR spectrum of liquefied or oven-dried chemical admixtures condition showed big differences. It is needed that the FT-IR analysis is performed on dry material. However there's no difference with the applicability of FT-IR spectroscopy for multi-compound chemical admixtures. So the utility of method analysis could not identify.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.135-135
• /
• 2017

제염기술은 원자력발전소의 순환계통장치 및 기기류의 방사성 오염물질을 제거하는 기술이다. 현재 국내 원전의 설계 수명 및 유지보수 시기가 도래함에 따라, 작업 전 작업자의 방사선 피사량을 극소화하기 위한 제염 기술이 주목을 받고 있다. 제염 방법에는 크게 기계적 제염과 화학약품을 사용하는 화학제염이 있다. 그 중 화학제염은 복잡한 구조의 제염 대상물에 대한 큰 효과 및 간단한 공정 때문에 주로 사용되고 있다. 제염 시 방사성 산화물과 오염성분을 제거하기 위해 강산 또는 강알칼리의 화학용액이 사용된다. 강한 화학약품을 사용함으로써 큰 제염효과를 얻을 수 있는 반면, 금속 재료의 부식에 대한 구동력도 커지게 된다. 금속 재료의 경우, 강한 부식성 환경에서 공식(pitting corrosion) 및 입계부식(intergranular corrosion)형태의 손상이 크게 발생하기 때문에, 제염공정 시 사용되는 화학용액에 대한 재료의 건전성 검증이 반드시 필요하다. 본 연구에서는 원전기기용 재료인 니켈합금강 Inconel600의 화학제염 시 시험공정 3가지에 대한 부식손상 특성을 규명하였다. 산화공정은 $HMnO_4$ 실험용액을 공통으로 사용하였으며, 산화공정 종료 후 환원공정은 각 시험공정에 따라 환원공정 1은 2000ppm $H_2C_2O_4$, 환원공정 2는 1500ppm $H_2C_2O_4$ + 500ppm $H_8C_6O_7$, 그리고 환원공정 3은 3000ppm $H_2C_2O_4$ 실험용액을 각각 투입하여 수행하였다. 산화, 환원공정을 1Cycle로 하여 온도 $75^{\circ}C$로 유지된 용액에 각 2시간씩 침적하였다. 각 시험공정 별로 총 5Cycle을 실시하였다. 각 시험공정 Cycle종료 후 시험편을 취외하여 무게감량측정, SEM(Scanning electron microscope)분석, 3D현미경분석 그리고 타펠분극 실험을 실시하였다. 각 분석결과를 토대로 하여, 니켈합금 Inconel600에 대한 화학제염 시 시험공정에 따른 부식특성을 규명하였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.255-260
• /
• 2005

Stability of functional properties and chemical components of gamma-irradiated Astragali Radix (AR) were investigated to study the application of radiation technology for preservation and hygiene of medicinal herbs. Thus, ethanolic extracts and ethyl acetate fractions were prepared from gamma-irradiated and gamma-nonirradiated AR, respectively. Functional properties were estimated by comparing antioxidant activity (DPPH radical scavenging activity, lipid peroxidation inhibitory activity) and protective effect against oxidative DNA damage in human lymphocytes. Chemical components were compared by HPLC analysis, comparing with calycosin ($_{t}$ R= 15.111 min), which was isolated from ethyl acetate fraction as a standard material. Their antioxidant activities and protective effects against oxidative DNA damage showed no significant difference at the concentrations tested. HPLC analysis also showed almost same pattem. These results suggest that the functional properties and chemical components of AR are not affected largely by gamma irradiation, and radiation technology can be applied to preservation and hygiene of medicinal herbs.s.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.2
• /
• pp.49-60
• /
• 2002

A study on mineral composition and chemical component governing of weathering process is necessary to know the weathering characteristics of sedimentary rocks. In this study, a mineral and chemical component analysis, and physical and engineering characteristic tests were conducted to find out the characteristics of sedimentary rocks in Daegu, according to the weathering degree of sedimentary rock. Test results show that the mineral composition of rock, such as Albite (Ab), Muscovite (Ms), Magenetite (Mt) and the chemical composition of $A_2O_3$, CaO, $Na_2O$, $K_2O$, MgO and so on are closely related to the weathering. Based on the test results, we illustrated the quantitative application of weathering decision for the sedimentary rocks.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.87-94
• /
• 2005

This study was carried out to investigate the effect of soil types and soil properties on wood preservative leaching. Radiata pine (Pinus radiata Don.) sapwood stakes, which had been treated with 2.0%(w/v) CCA, were leached for 12 weeks by a common laboratory method in four different soils and for 14 days by the AWPA standard leaching method in water. The physical and chemical properties of the four soils were determined, and the percent leaching of the individual component of CCA was correlated with the various soil properties. The data show that leaching of preservative chemicals from treated wood exposed to soil is influenced by the type of soil. The preservative leaching was greater when wood was exposed to water than when the wood was in contact with water-saturated soil. The greatest chromium, copper and arsenic leaching from CCA-treated stakes were observed in the sandy loam, loam, and sand, respectively, and the least amount of leaching of CCA components occurred in the silty loam. The leaching of preservative components from treated wood is extremely complex and appears to be influenced differently by the soil properties. The extent of copper leaching from CCA treated wood appears to be related to exchangeable Mg and sum of bases. There is a reasonably good relationship between chromium leaching and exchangeable Mg, and between arsenic leaching and exchangeable K, soil Ni, Mn, Fe, Cr, or Cu content. Since this study was conducted based on laboratory leaching method using small cross-sectional dimensions; thus, data obtained from this experiment should not be used to predict leaching characteristics from commercial-size wood used in real situation. Accordingly, further studies are necessary using outdoor ground-contact leaching.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.22-27
• /
• 2019

Nail polish is used to decorate nail beautifully however, it contains lots of toxic materials. Generally, Nail polish consists of film-forming agent, colorant, solvent, surfactant and stabilizer. In this study, to replace toxic chemicals to low irritative, eco-friendly ingredients, we prepared 4 kinds of nail polish and tested safety, stability and performance. Nail polish including shellac/gelatin showed best performance in water-resistance, friability and drying time. When cell toxicity test is done by MTT assay, shellac-gelatin nail polish showed over 70% cell viability at $1,000{\mu}g/mL$ whereas control nail polish in market showed 50% cell viability. At 4 weeks temperature stability test, color was stable at low temperature however it needs formulation improvement at higher temperature.