• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.143-149
• /
• 1998

When anesthetics were added to a bacteriorhodopsin (bR) in the purple membranes, the 570 nm absorption band shifts to 480 nm. This anesthetic-induced spectroscopic change is reversible. The apparent pKa (6.3) of this equilibrium depends on the nature of the anesthetics in which bR is dispersed. The electric orientation measurements showed that the native bR is easily achieved by relatively small electric field which is oriented at $60^\circ$, while anesthetic-treated bR is not the case. These results demonstrate that the subtle changes in the chromophore and the protein structure surrounding the chromophore by anesthetics influence the spatial orientation of the charged residues in the protein matrix surrounding chromophore.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.2
• /
• pp.203-213
• /
• 2024

This study delves into the mechanical properties of fiber-reinforced cement composites(FRCC) concerning the dispersion method of multi-walled carbon nanotubes(MWCNTs). MWCNTs find utility in industrial applications, particularly in magnetic sensing and crack detection, owing to their diverse properties including heat resistance and chemical stability. However, current research endeavors are increasingly directed towards leveraging the electrical properties of MWCNTs for self-sensing and smart sensor development. Notably, achieving uniform dispersion of MWCNTs poses a challenge due to variations in researchers' skills and equipment, with excessive dispersion potentially leading to deterioration in mechanical performance. To address these challenges, this study employs ultrasonic dispersion for a defined duration along with PCE surfactant, known for its efficacy in dispersion. Test specimens of FRCC are prepared and subjected to strength, drawing, and direct tensile tests to evaluate their mechanical properties. Additionally, the influence of MWCNT dispersion efficiency on the enhancement of FRCC mechanical performance is scrutinized across different dispersion methods.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.830-836
• /
• 1997

The surface modification of iron oxide particle produced from steel-pickled acid by sodium-contained materials was studied. The molar ratio of $SiO_2$ to $Na_2O$ of sodium silicate was 1, 2, 3.5, respectively. The dispersion stability of iron oxide suspension as functions of amount of silica and pH was evaluated by surface charge and sedimentation velocity of iron oxide particle. Then the amount of sodium silicate was determined to provide a dispersion stability of iron oxide particle above pH 7. Finally, the surface modification of iron oxide particle with sodium silicate as silica-contained materials was done by wet ball milling. In the results of study, the dispersion stability of silica modified iron oxide particle was largely depended on amount of silica and pH together. The untreated iron oxide was unstable at pH 8, i.e. isoelectric point, but, the surface modified iron oxide particle with 0.8wt% silica was stable above pH 5. The dispersion stability was enhanced with 0.2wt% of anionic polyelectrolyte.

• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.121-125
• /
• 2013

In this work, we prepared the carbon paper from chopped carbon fibers using a gas diffusion matrix in polymer electrolyte membrane fuel cells by wet processing. The process of making carbon paper using wet processing is consisted of the three steps involving the dispersion of chopped carbon fibers, the preparation of the carbon fiber web, the impregnating of phenol resin. This work was focused on finding the optimal surfactant to make the carbon paper with 2D orientation of carbon fibers by investigating the dispersion state of carbon fibers in different dispersion solutions. Furthermore, the effect of phenol resin and carbon black contents on properties of electric conductivity was analyzed. As a result, it is confirmed that the carbon fiber was well dispersed when using sodium dodecyl sulfate as a surfactant, and the carbon paper with 8 wt% of phenol and 5 wt% of carbon black contents showed the most excellent electrical property.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.237-241
• /
• 2012

많은 건설사업장의 경우 토사 유출에 따른 고농도 탁수가 발생하며, 그 탁도를 낮추기 위해 침전지 혹은 토사탈수백 등의 Best Management Practices(BMPs)를 이용한다. 본 연구에서는 유입되는 탁수에 고분자응집제인 polyacrylamide(PAM)를 액상으로 주입하고, 침전지와 토사탈수백을 통해 탁도를 저감하는 field-scale 실험을 수행하였다. 일반적으로 침전지 중간에는 유입되는 물의 힘을 분산시키기 위해 배플이라는 구조물이 설치되는데, 본 연구결과에 따르면 PAM을 통한 화학적 처리 없이 배플 자체로는 탁도를 낮추는 데 그 효과가 낮았으나, PAM주입을 할 경우 배플 설치 여부에 상관없이 90-98%까지 방류수 탁도를 낮출 수 있는 것으로 나타났다. 침사지 이후에 설치한 토사탈수 백은 그 효과가 낮았으나, 침사지 없이 토사탈수백만 사용할 경우 PAM을 이용한 화학적 처리 없이는 만족할 만한 방류수 탁도를 기대하기 어려웠다. 본 연구결과는 향후 미국에서 면적 10에이커 이상의 공사현장에 적용되는 탁도 규제에 대한 대응 방안으로 PAM을 이용한 탁수 처리의 효용성을 보여준다.

• Applied Chemistry for Engineering
• /
• v.35 no.2
• /
• pp.122-127
• /
• 2024

Cosmetic preservatives are an important class of ingredients in terms of ensuring sustainable use and providing customer satisfaction. Recently, a great deal of interest has been drawn to the production and use of toxic-free, naturally derived preservatives. In this work, a new naturally derived preservative (laurimino bispropanediol, LB) was developed to replace the most widely used diol preservatives, such as 1,2-hexanediol or 1,2-octanediol. The basic properties of the obtained preservative were measured, and the solution behavior of the preservative in an aqueous medium was examined. The feasibility of micelle formation in the preservative solution was investigated using the fluorescence (FL) based pyrene method. Micelle formation was feasible owing to the relatively long hydrophobic chains and increased hydroxyl groups in the preservative molecules. The emulsification capability of the preservative was assessed using the Rosano and Kimura method, showing that the preservative possessed emulsifying capability in an organic solvent (benzene) and soy bean oil. In addition, the dispersion stability of cosmetic formulations, including the new LB preservatives such as essence and lotion, was demonstrated by comparing the light transmittance of the formulations. This article provides important information for future research regarding the synthesis and practical applications of new toxic-free naturally derived preservatives.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.533-540
• /
• 2018

Graphene has been reported to be an excellent lubricant additive that reduces friction and wear when coated on the surface of various materials or when dispersed in lubricants as an atomic thin material with the low surface energy. In this study, alkyl functionalized graphene oxide (FGO) nanosheets for oil-based lubricant additives were prepared by using three types of alkyl chloride chemicals (butyl chloride, octyl chloride, and tetradecyl chloride). The chemical and structural properties of the synthesized FGOs were analyzed by Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscope (SEM), and transmission electron microscope (TEM). The synthesized FGOs were dispersed at 0.02 wt% in PAO-0W40 oil and its tribological characteristics were investigated using a high frequency friction/wear tester. The friction coefficient and the wear track width of poly alpha olefin (PAO) oil added with FGO-14 were tested by a ball-on-disk method, and the measured results were reduced by ~5.88 and ~3.8%, respectively compared with those of the conventional PAO oil. Thus, it was found that the wear resistance of PAO oil was improved. In this study, we demonstrated the successful functionalization of GO as well as the improvement of dispersion stability and tribological characteristics of FGOs based on various alkyl chain lengths.

• Korean Journal of Microbiology
• /
• v.55 no.2
• /
• pp.87-102
• /
• 2019

Most chronic wounds persist in the inflammatory phase during wound healing due to the biofilm. Biofilms are resistant to antibiotics, weakening penetration, resistance to biocides and weakening local immune responses. The biofilm is firmly attached to the surrounding tissues and is very difficult to remove. Therefore, strategies to remove hard biofilms without damaging surrounding tissue are very important. One of possible strategies is dispersal. So many studies have been done to develop new strategies using dispersal mechanisms. In this review paper, especially chemotaxis, phage therapy, polysaccharides, various enzymes (glycosidases, proteases, and deoxyribonucleases), surfactants, dispersion signals, autoinducers, inhibitors were introduced. Combination therapies with other therapies such as antibiotic therapy were also introduced. It is expected that the possibility of treatment of chronic wound infection using the knowledge of the biofilm dispersal mechanisms presented in this paper will be higher.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.65-70
• /
• 1998

The physiochemical properties of extracellular lipid produced by an oleaginous yeast, Rhodotorula glutinis K-501 were examined. From the analytical experiments, it was suggested that the extracellular lipid produced is glycolipidic compound. Critical micelle concentration and minimum surface tension of the extracellular lipid in aqueous solution were 89mg/L and 31dyne/cm, respectively. Surface tension was also constant throughout wide range of pH. The emulsifying abilities and dispersing power of the extracellular lipid were much greater than those of commercial surfactants such as Tween 80 and Triton X-100 by factors of 2-3 and 1.3, respectively.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.216-221
• /
• 1991

Surface activities of four potassium N-acyl-N-methyl-${\beta}$-alaninate including surface tension, foaming power, foam stability, emulsifying power and dispersion power were measured respectively, and critical micelle concentration(cmc) was evaluated. Consequently these anionic surfactants with long chain acyl amide showed good emusifying power of O/W type, foaming, foam stability and dispersion effect.