• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.292-292
• /
• 2005

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.202-205
• /
• 2003

$\beta$-Sulfatoethylsulfone기를 갖는 일시적 수용성 반응성 분산염료는 분산제를 첨가하지 않고도 염욕내에서 단분자 상태를 유지할 수 있으며 염색 공정 중 온도와 pH조건의 변화에 따라 Scheme 1과 같이 비수용성 vinylsulfone form으로 변환된다[1]. 이 때 vinylsulfone기는 섬유와 화학결합을 할 수 있는 대표적인 반응기이므로 이 염료는 일시적 수용성 분사염료와 반응성 염료의 두 성질을 동시에 지닌다[2]. (중략)

• Analytical Science and Technology
• /
• v.19 no.5
• /
• pp.394-399
• /
• 2006

The polishing performance and the relationships of electrochemistry depending upon oxidizers and additives in the tungsten CMP slurry used in semiconductor industry were investigated. Hydrogen peroxide, ferric nitrate and potassium iodate were used as oxidizers and they showed different oxidation reactions on tungsten film depending on the kind of oxidizers and pH of slurry. The differences influenced the polishing performance. Etching reaction was predominated in the hydrogen peroxide. However, passivation reaction was prevailed in ferric nitrate and potassium iodate. TMAH and KOH raised the potential energy and removal rate of tungsten, and improved a dispersion characteristic of slurry by increasing absolute value of zeta potential. Addition of 100 ppm of poly(acrylic acid) of M.W. 250,000 improved dispersion ability.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.560-565
• /
• 2007

Copper fine particles, ranging from $0.11{\mu}m$ to $0.64{\mu}m$ in average size, were prepared by a chemical reduction method using hydrazine ($N_2H_4$) as a reduction agent in waste copper solutions. The effect of the amount of hydrazine addition was investigated on the properties of the obtained powders. Also, the effect of the addition of dispersing agents [Polyvinyl alcohol (PVA), polyvinyl pyrrolidone (PVP)] during particle synthesis was studied. The powders, obtained from 1 M waste copper solutions, showed the mixtures of Cu and $Cu_2O$ crystals at low hydrazine addition amounts of 0.8 mol and 1.0 mol, while those exhibited pure Cu crystals at adequate hydrazine addition amount of 0.12 mol. The average size of the Cu powders decreased with increasing the concentrations of hydrazine and dispersing agents. The addition of PVA to the solutions as a dispersing agent was more effective than that of PVP in preventing the aggregation of particles.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.1-5
• /
• 1999

The dispersing performance of oligomer-type anionic surfactants ($C_mD-Na$), cooligomers of diethylester maleate and alkylvinylether of different alkyl chain lengths or polymerization degree were studied on the aqueous suspension of iron dxide or titanium dioxide particles which are hydrophilic pigments. The dispersion behavior of oligomer-type surfactants for these dispersoids, although anion charges on the surface of pigments particles showed different dispersing properties, was dependent upon the side alkyl chain length. Oligomer-type surfactants having more than $C_8$ side alkyl chain exhibited large dispersing action for relatively hydrophobic ${\alpha}-Fe_2O_3$ and Anatase $TiO_2$ in the concentration range of more than 0.1% oligomer-type surfactant solutions.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.748-753
• /
• 1999

In gelcasting process of the Si powder slurry mixed with acrylamide monomers, it was characterized the effects of chemical parameters such as monomers and additives(polymerization initiator, catalyst and dispersant), Si powder and humidity at drying on processing parameters such as viscosity and idle time as well as on shrinkage and mechanical strength of green bodies. Generally, idle time decreased as initiator and catalyst amounts were increased, but rather depended on initiator. Idle times of the slurries greatly decreased to less than 1/2 time of the premix solutions in which gelation was delayed at higher MBAM portion as a crosslinking monomer. And fluidity of the slurries became worse at greater than 0.6 wt % dispersant. The green bodies showed only less than 7% of linear shrinkage without crack and distortion when dried for longer than 300 hrs under 98% humidity. Typically, the dried bodies containing 40, 50 vol % of Si powder displayed 64 and 36 Mpa in average, respectively.

• Composites Research
• /
• v.37 no.4
• /
• pp.350-355
• /
• 2024

Boron nitride nanotubes (BNNT) are materials of significant interest in next-generation technological fields due to their outstanding physicochemical properties, including excellent chemical and thermal stability. However, for effective utilization, dispersion of BNNT is essential. Unfortunately, BNNT exhibit hydrophobic surfaces and strong van der Waals forces, making their dispersion challenging. Current dispersion methods include the addition of surfactants and surface functionalization, but these chemical treatments often damage BNNT and involve cumbersome processes. In this study, we dispersed BNNT in water under various tip ultrasonication conditions and identified conditions that do not affect BNNT using FT-IR spectroscopy, Raman spectroscopy, and X-ray diffraction analysis. Subsequently, enhanced dispersibility was confirmed through turbidity measurements, and the solubility range in 15 different solvents was evaluated using the Hansen solubility parameter.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.1-5
• /
• 1998

The dispersing behaviors of oligomer-type anionic surfactants, cooligomers of diethyl maleate(CmD-Na) or maleic anhydride (CmM-Na) and $C_4{\sim}C_{16}$ alkyl vinylether, which have a different alkyl chain length of the hydrophobic group or degree of polymerization, were studied on the aqueous suspension of ${\alpha}-$ and ${\beta}-$ copper phthalocyanine and carbon black particles. In case of the side alkyl chain length of $C_4{\sim}C_{10}$ of CmD-Na, the dispersing actions were good in the concentration range of 0.01 to 0.1%. Especially, side alkyl groups played an important role in the orientation adsorption on the surface of pigment particles, and oligomers having smaller degrees of polymerization were more effective in the dispersing action, but did not affect the dispersability of carbon black.

• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.440-446
• /
• 2006

ZnO nanoparticles were prepared by laser ablation of the ZnO powder dispersed in deionized water and surfactant solutions, and characterized using UV-VIS absorption spectroscopy, X-ray diffractometer and Transmission electron microscopy(TEM). ZnO nanoparticles produced show the pure ZnO crystal state without mixed state with Zn(OH)2 or Zn, and have the band gap energy of 3.35 eV, which is comparable to that of bulk ZnO. While ZnO nanoparticles prepared in SDS solution have the average diameter of 28nm with near spherical shape, those prepared in CTAB solution have the average size of 40 nm with mainly rod-like shape. ZnO colloidal solution of CTAB is more stable than that of SDS. These difference according to surfactants can be explained by difference of electrostatic interaction between surface charge of ZnO and surfactant molecules and by solvation effect in solution.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.391-395
• /
• 2013

In this study, zinc oxide (ZnO) nano powder, well known as an UV absorbing material, was synthesized with three synthetic conditions by the hydrothermal method. After ZnO nano powder was surface-modified with various silane coupling agents to improve dispersion property, a dispersion sol was prepared with dispersant for 72 h by the ball-milling of surface-modified ZnO nano powder. The dispersion sol, prepared by modifying the surface of the ZnO nano powder with an average size of about 30 nm using 3-chloropropyl trimethoxy silane, showed an excellent dispersion stability with a high UV-shielding and visible trnasparency.