• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.68-84
• /
• 1999

Biodegradation is a natural weathering process by microorganisms to decompose spilled oil or environmental contaminants. To accelerate this process, applying nutrients (fertilizer) or more microorganisms to naturally occurring microorganisms is called 'Bioremediation.' Presently, most popular response technique to spilled oil is mechanical cleanup using booms or skimmers. For the alternative to this technique, chemical dispersants, in-situ burning are used. Another promising alternative is bioremediation and it can clean oil contaminated seashore during enough time. In this paper, types of bioremediation technologies, its usage potential, and important consideration issues when applying this technique were summarized.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.230-234
• /
• 1999

Barium titanyl oxalates (BTO) has been homogeneously prepared by thermal decomposition of dimethyl oxalate (DMO) in hydrochloric solution containing $Ba^{2+}$ and $Ti^{4+}$. Particles of BTO settled on the bottom of the beaker were collected at the aging time of 120 min using hydroxy propyl cellulose (HPC) as a dispersant. The reaction temperature, the concentration ratio of $[DMO]_0/([Ba^{2+}]_0+[Ti^{4+}]_0)$ and the existence of HPC were found to influence on morphologies of BTO, chemical yields and characteristics of barium titanates formed from their precursors.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.551-554
• /
• 2016

Silver particles were synthesized by chemical reduction with ionic liquids. Structure of silver particles were significantly affected by the cation parts of the ionic liquids. With increasing the length of the cation part, the smaller silver particles were formed regardless of the anion type. This is mainly attributed to the different stability of the ionic liquid structure formed by physical bond between cation parts. Among seven ionic liquids, [Omim][$PF_6$] was the most effective for synthesizing silver particles.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.472-477
• /
• 2021

The crosslinking behavior of polyhedral oligomeric silsesquioxane (POSS) containing eight acrylate groups in a cage form in ethylene-propylene-diene rubber (EPDM) peroxide crosslinking, the effect on mechanical properties, and the thermal stability were investigated. An EPDM/POSS composite material was prepared by mixing 0 to 12 parts per hundreds of rubber (phr) of POSS per 100 phr of rubber by content and adding a peroxide crosslinking agent. As a result of crosslinking properties, it was found that the acrylate group of POSS was activated by peroxide and improved the peroxide crosslinking efficiency. Although the dispersion stability of POSS in EPDM/POSS composites was poor, the fracture strength, elongation and thermal stability were improved.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.5
• /
• pp.465-471
• /
• 2017

In this study, oxidized graphene nanoplatelet(GO) was prepared by oxidizing graphene nanoplatelet(GNP) with nitric acid in order to solve the problem of dispersion of GNP, one of nano materials. The surface chemical composition of the prepared GO was analyzed by fourier transform infrared spectroscopy(FT-IR) before incorporation into the epoxy paint, and the dispersibility in the solvent was confirmed. Meanwhile, GNP/Epoxy and GO/Epoxy paint were prepared by mixing GNP, GO with 0.1, 0.3, 0.5 and 1.0wt.% in epoxy paint and the mechanical properties were evaluated. As a result, GNP/Epoxy and GO/Epoxy paints showed better mechanical properties than Neat Epoxy which did not incorporate GNP, GO. Especially, when 0.3wt.% of GO was incorporated into epoxy resin, it showed higher tensile strength than Neat Epoxy. It was confirmed that acid treatment of GNP was effective in improving the mechanical properties of epoxy paint.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.753-756
• /
• 2001

This research made a study of MnO$_2$electrode for supercapacitor with a diffuser (Polyvinyl alcohol). Manganese dioxide was used as active material. We tried to increase specific surface area by adding PVA. Manganese dioxide was synthesized by a sol-gel method using fumaric acid and oxalic acid in low temperature with high yield. Therefore, We prepared Manganese dioxide powder. This powder was used by active materials. The electrode was made by a mixture of active material, ketjen-black which is a large specific surface area, and PVdF-co-HFP as binder agent with using Nickel mesh as current collector. Here we reported on the synthesis and electrochemical performance of a enhanced material. All active materials have been submitted to X-ray diffraction and Scanning electron microscopy.

• Tribology and Lubricants
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1994

어떤 유체는 전기장에서 순간적으로 고체화한다. 이러한 다변형의 물질은 더욱 신속하고 적절한 기계의 앞날을 약속하고 있다. T-1000 (영화 터미네이터2; 심판의 날에서 생동하는 거의 불멸의 로보트)는 능숙하게 액체에서 고체로 변환다. T-1000은 총탄으로 관통되었을 때, 로보트의 액체-금속 피부는 관통된 구멍으로 흘러 들어가고, 산산조각이 났을때 T-1000은 녹아버린 후에 다시 제원형으로 응결된다. 전기유변성 유체는 이 영화제작자의 상상력에 어느 정도 적용될 수 있을 것이다. 전기유변성 유체는 전기장이 있는 곳에서 변형을 일으키는 물질이다. 주어진 전기장의 세기에 따라 전기유변성 유체는 물처럼 자유롭게 흐르기도 하고, 꿀처럼 진득하게 흐르기도 하며 제라틴처럼 고체화하기도 한다. 참으로 물질이 수천분의 일초사이에 한상태에서 다른 상태로 변할 수 있는 것이다. 전기유변성 유체는 만들기 쉽다; 절연액체에 미시적 입자가 분산된 것이다. 그러나 아직은 상업용으로 쓰이지 못하고 있다. 여러가지 문제점 중의 하나가 고체로서는 구조적으로 약하고, 또, 액체로서는 마찰성이 문제이며, 특히 고온에서는 화학적으로 불안정하다는 것이다.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.53-61
• /
• 2014

온실가스 증가로 인한 지구온난화 문제가 범세계적인 문제로 대두되고 있는 가운데, 특히 온실가스 중 약 76%이상을 차지하는 이산화탄소를 흡수하기 위한 흡수제 개발에 여러 국가들이 심혈을 기울이고 있다. 그 중 이산화탄소 흡수제로 가장 상용화 되어 있는 모노에탄올아민(monoethanolamine, MEA)은 분자량이 작아 몰 농도비에 따른 이산화탄소의 흡수에 유리하고 반응속도가 빠르다는 장점이 있으나, 재생에 필요한 에너지가 높다는 단점이 존재한다. 수용액중에서 MEA가 $CO_2$를 흡수하는 반응의 반응자유에너지는 반응메카니즘을 이해하는데 가장 기본적인 도구이다. 본 연구에서는 B3LYP, M06-2X의 밀도범함수를 이용하여 MEA의 $CO_2$ 흡수반응의 반응자유에너지를 계산하는 계산모델을 선정하였다. 수용액에서 MEA가 $CO_2$를 흡수하는 반응의 반응자유에너지를 밀도범함수를 이용하여 계산할 때는, 수용액상태에서 화학종의 분자구조를 최적화하는 것이 필요하였다. 또한 M06-2X 밀도범함수가 B3LYP 밀도범함수보다 좋은 결과를 주었으며, 분산보정을 하는 것이 보다 좋은 결과를 주었다.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.809-813
• /
• 1999

D phase emulsification has been developed and elucidated the emulsification mechanism by using phase diagrams. The process of D phase emulsification begins with the formation of isotropic surfactant solution, follows by formation of oil-in-surfactant (O/D) gel emulsion by dispersion of octamethylcyclotetra siloxane(OMCS) in the surfactant solution. Polyols were essential components for this experiments. To understand the function of polyols, the solution behaviors of nonionic surfactant/oil/water/polyol systems were investigated by the ternany phase diagrams of polyoxyethylene oleyl ether/OMCS/propylene glycol(PG) aqueous solutions. The solubility of oil in the isotropic surfactant phase was increased with the addition of PG. D phase emulsion was formed in the range of 70~90% of OMCS and 2.0~3.0 dyne/cm of interfacial tension and the structure was homogenious spherical and O/W type and its diameter was about $10{\mu}m$.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.480-484
• /
• 2012

Concrete, the mixture of cement, sand, gravel and water, is a suspension substance extensively used to construct building materials. When a concrete mortar is applied to the underwater construction, the rheology of concrete is of great importance to its flow performance, placement, anti-washout and consolidation. In this research, the anti-washout and rheological properties of concrete have been investigated with concrete admixtures prepared by adding anionic surfactants, cationic surfactants, and polymeric thickeners. The concrete mortar formulated by pseudo-polymeric systems with the electrostatic association of anionic and cationic surfactants, showed high viscosities and suitable anti-washout properties, but poor pumpabilities. The addition of poly methyl vinyl ether to the mixed surfactant system exhibits synergistic effects by improving the concrete mortar properties of the concrete mortar such as fluidity, visco-elastic property, self-leveling, and anti-washout.