• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.963-969
• /
• 1996

Cure characteristics of DGEBA(diglycidyl ether of bisphenol A)/dicy(dicyandiamide) system containing diuron(3-(3,4-dichloro phenyl) -1,1-dimethylurea) as an accelerator was investigated. The system has shelf life of six months because dicy is insoluble in liquid/solid resins at room temperature. It is generally known that dicy is an adequate curing agent for one component adhesive due to its highly latent property. With increasing the amount of added dicy, reaction heat of DGEBA/dicy system increased and degree of conversion was not varied. For DGEBA/dicy/diuron system, cure temperature decreased about $40^{\circ}C$ and cure reaction became fast by the addition of diuron which activates dicy. $T_g$ of the mixed resin decreased with the amount of accelerator. which was interpreated with molecular structure forming loose chain. Cure kinetics of DGEBA/dicy and DGEBA/dicy/diuron system were explained using Kamal's autocatalytic reaction model. The effect of acceleration was confirmed with that reaction model.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.847-853
• /
• 2016

Here has been examined a 3-dimensional computational fluid dynamics (CFD) modeling in order to investigate the performance analysis of proton exchange membrane (PEM) fuel cells with serpentine flow fields. The present CFD model considers the isothermal transport phenomena in a fuel cell involving mass, momentum transport, electrode kinetics, and potential fields. Co-current flow patterns for a PEMFC are considered for various geometries in the single straight cell. Current density distribution from the calculated distribution of oxygen and hydrogen mass fractions has been determined, where the activation overpotential has been also calculated within anode and cathode. CFD results showed that profiles differ from those simulations subjected to each the calculated activation overpotential. It is interesting that the present serpentine flow field shows the specific distribution of current density with respect to the aspect ratio of depth to width and the ratio of reaction area for various serpentine geometries. Simulation results were considered reasonable with the other CFD results reported in literature and global comparisons of the PEMFC model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.213-213
• /
• 1999

현재 LCD용 기판재료는 ITO/glass를 전극으로 사용하고 있다. 그러나 유리기판은 무겁고 깨지기 쉽기 때문에 사용상 곤란한 점이 많다. 최근 flexible하고 가공성 및 생산성이 우수한 플라스틱한 ITO를 성막하여 EL용, Touch panel, plastic LCD용 사용하려는 시도로, roll-to-roll 연속 스퍼터링에 의한 ITO성막공정에 대한 연구가 최근 활발하게 이루어지고 있다. 폴리머는 유리에 비해 Tg 온도가 낮고, 기판으로부터의 수분 및 여러 종류의 가스방출이 심하기 때문에 유리와는 달리 ITO막의 제조에 있어 큰 차이점이 있다. 따라서, 폴리머에 반응성 스퍼터링을 하기 위해서는 표면처리가 중요한 변수가 되며, roll to roll sputter로 ITO 필름을 얻기 위해서는 폭과 길이 방향으로 균일한 막을 얻는 것이 중요하다. 두께 75$\mu\textrm{m}$, 폭 190mm, 길이 400m로 권취된 광학용 Polyethylene terephthalate(PET:Tg:8$0^{\circ}C$)위에 In-10%Sn의 합금타겟과 Unipolar pulsed DC power supply를 사용하여 반응성 마그네트론 스퍼터링 방법으로 0.2m/min의 속도로 연속 스퍼터링 하였다. PET를 Ar/O2 혼합가스로 플라즈마 전처리를 한 후, AFM, XPS를 이용하여 효과를 분석을 하였고, 성막전에 가스방출을 막기 위해 TiO를 코팅하였다. Pilot 연속 생산공정에서 재현성을 위해 PEM(Plasma Emission Monitor)의 optical emission spectroscopy를 이용, 금속과 산화물의 천이구역에서 sprtter된 I/Sn 이온과 산소 이온의 반응에 의한 최적의 플라즈마의 강도값을 입력하여 플라즈마의 radiation을 검출하고, 스퍼터링 공정중 실질적인 in-situ 정보로 이용하였다. PEM을 통하여 In/Sn의 플라즈마 강도변화를 조사하였다. 초기 In/Sn의 플라즈마 강도(intensity)는 강도를 100하여, 산소를 주입한 결과, plasma intensity가 35 줄어들었고, 이때 우수한 ITO 박막을 얻을 수 있었다. Pulsed DC power를 사용하여 아크 현상을 방지하였다. PET 상에 coating 된 ITO 박막의 표면저항과 광투과도는 4-point prove와 spectrophotometer를 이용하여 분석하였고, AES로 박막의 두께에 따른 성분비를 확인하였다. ITO 박막의 광투과도는 산소의 유량과 sputter 된 In/Sn ion의 plasma emission peak에 따라 72%-92%까지 변화하였으며, 저항은 37$\Omega$/$\square$ 이상을 나타내었다. 박막의 Sn/In atomic ratio는 0.12, O/In의 비율은 In2O3의 화학양론적 비율인 1.5보다 작은 1.3을 나타내었다.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.373-377
• /
• 1994

A mechanism for the synthesis of benzophenone from oxidation of diphenylmethane under Aliquit 336 phase transfer catalyst is investigated in this study. The production rate of benzophenone increased with the increasing amount of Allquat 336 and potassium tert-butoxide. At low concentrations of diphenylmethane and oxygen, the reaction order was first with the concentrations of diphenylmethane and oxygen respectively, but it approached to zero order at high concentrations. Tert-butyl alcohol, by-product of the reaction, inhibited the formation of benzophenone. Experimental results fit fairly well to the following initial reaction rate equation derived from reaction mechanism. $$({\gamma}_{BP})_0={\frac{k_1k_3k_5[QCI]_0[DPM]_0[PTB]_0[O_2]_0}{k_2k_4[TBA]_0+k_2k_5[O_2]_0+k_3k_5[O_2]_0[DPM]_0}}$$

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.931-937
• /
• 2008

Rigorous multiscale modelling and simulation of the MTR for WGSR was carried out to accurately predict the behavior of process variables and the reactor performance. The MTR consists of 4 fixed bed tube reactors packed with heterogeneous catalysts, as well as surrounding shell part for the cooling purpose. Considering that fluid flow field and reaction kinetics give a great influence on the reactor performance, employing multiscale methodology encompassing Computational Fluid Dynamics (CFD) and process modeling was natural and, in a sense, inevitable conclusion. Inlet and outlet temperature of the reactant fluid at the tube side was $345^{\circ}C$ and $390^{\circ}C$, respectively and the CO conversion at the exit of the tube side with these conditions approached to about 0.89. At the shell side, the inlet and outlet temperature of the cooling fluid, which flows counter-currently to tube flow, was $190^{\circ}C$ and $240^{\circ}C$. From this heat exchange, the energy saving was achieved for the flow at shell side and temperature of the tube side was properly controlled to obtain high CO conversion. The simulation results from this research were accurately comparable to the experimental data from various papers.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.45-49
• /
• 2006

Electrochemical hydrogenation/dehydrogenation properties were studied for a single particle of a Mm-based(Mm : minh metal) hydrogen storage alloy($MmNi_{3.55}Co_{0.75}Mn_{0.4}Al_{0.3}$) for fuel cell and Ni-MH batteries. A carbon fiber microelectrode was manipulated to make electrical contact with an alloy particle, and the potential-step experiment was carried out to determine the apparent chemical diffusion coefficient of hydrogen atom($D_{app}$) in the alloy. Since the alloy particle we used here was a dense, conductive sphere, the spherical diffusion model was employed for data analysis. $D_{app}$ was found to vary the order between $10^{-9}\;and\;10^{-10}[cm^2/s]$ over the course of hydrogenation and dehydrogenation process. Compared with the conventional composite film electrodes, the single particle measurements using the microelectrode gave more detailed, true information about the hydrogen storage alloy.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.1
• /
• pp.37-41
• /
• 2005

We investigated the electrochemical properties and microstructure on the various argon deposition pressure $(P_{Ar})$ and the low annealing temperature $(400^{\circ}C)$ of $LiCoO_2$ cathodes, which deposited by R.F. magnetron sputtering. The microsuucture and composition of Lico02 thin film was changed as a function of $P_{Ar}$. The capacity and electrochemical properties were improved with Ph of $LiCoO_2$ thin films. The cycling reversibility and stability of thin film batteries were measured by cyclic voltammetry and the constant current charge-discharge. The physical properties of cathode films were analyzed by ICP-AES, XRD, SEM and AFM for composition, crystallization and surface morphology.

• Radiation Oncology Journal
• /
• v.17 no.4
• /
• pp.275-280
• /
• 1999

Purpose : To assess the feasibility and the toxicity of the neoadjuvant chemotherapy on the treatment of patients with locoregionally advanced nasopharyngeal carcinoma. Methods and Materials : We analyzed 77 previously untreated and histologically confirmed advanced stage nasopharyngeal carcinoma patients treated with neoadjuvant chemotherapy followed by radiation therapy at the Seoul National University Hospital between 1984 and 1996. The stage distribution was as follows : AJCC stage III-2, stage IV-75. Sixty-six patients received infusion of 5-FU (1000 mg/m$^2$, on Day 1$\~$5) and cisplatin (100 mg/m$^2$, on Day 1), eleven patients received infusion of 5-FU (1000 mg/m$^2$, on Day 1 $\~$5) and carboplatin (300 mg/m$^2$, on Day 1) as neoadjuvant chemotherapy Prior to radiation therapy. The median follow-up for surviving patients was 44 months. Results : The overall chemotherapy response rates were 87$\%$. The toxicities of chemotherapy were mild. Only 3 patients experienced Grade 3 toxicities (1 for cytopenia, 2 for nause/vomiting). The degree of radiation induced mucositis was not severe, and ten patients developed Grade 2 mucositis. The 5-year overall survival rates were 68$\%$ and the 5-year disease free survival rates were 65$\%$. The 5-year freedom from distant metastasis rates were 82$\%$ and 5-year locoregional control rates were 75$\%$. Conclusion : This single institution experience suggests that neoadjuvant chemotherapy improves overall survival and disease free survival for patients with advanced stage nasopharyngeal carcinoma without increase of toxicity.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.14 no.2
• /
• pp.171-180
• /
• 2011

Purpose: The aim of this study was to assess changes in neuropeptide Y (NPY) immunoreactivity in the hypothalamus and interstitial cells of Cajal (ICC) in the small intestine of rats fed high-fat diets (HFD). Methods: Male Sprague-Dawley rats (200~250 g body weight) were randomly divided into two groups, which were the control group (normal chow diet for 6 weeks), and the HFD group (rodent diet with 60% kcal fat for 6 weeks). The immunoreactivity of NPY in the hypothalamus and ICC in the small intestine was evaluated after every feed for 6 weeks. Results: NPY immunoreactivity was observed strongly in the hypothalamic nuclei in the HFD group compared to the control group. The numbers of NPY-immunoreactive (IR) cells were significantly higher in the paraventricular hypothalamic nucleus in the HFD group than in the control group. In the region of Auerbach's plexus (AP) of small intestine, the staining intensity of the ICC-IR cells was reduced in the HFD group compared to the control group. The numbers of ICC in the small intestine with HFD, including ICC in the inner circular and outer longitudinal muscle were significantly lower than in the control group. Conclusion: This study suggested that increasing NPY-IR cells in the hypothalamus may reflect resistance of NPY action after a HFD, and decreasing ICC-IR cells in the small intestine after a HFD is functionally significant in gastrointestinal motility.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1156-1163
• /
• 1996

This study is related to the investigation of the characteristics of quaternary ammonium salt catalyst on the addition reaction of carbon dioxide and glycidyl methacrylate(GMA) to form(2-oxo-1,3-dioxolane-4-yl)methacrylate(DOMA). Among the salts tested, the ones with higher alkyl chain length and with more nucleophilic counter anion showed a higher catalytic activity. Mixed catalysts of NaI and 18-crown-6 showed a good yield of DOMA, but when they are used alone, they showed no catalytic activity. The DOMA monomer was obtained in low polar solvents, while poly(DOMA) could be directly synthesized in aprotic dipolar solvents. Kinetic studies carried out by measuring $CO_2$ pressure in a high pressure batch reactor showed that the reaction rate was first order to the concentration of GMA and $CO_2$ respectively. The rate constant(k) was 0.56L/mol hr and Henry's constant(H') of $CO_2$ in diglyme at $80^{\circ}C$ was $6.5{\times}10^{-4}mol/L{\cdot}kPa$.