• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.118-130
• /
• 1995

Fuel spray in a gasoline engine is a significant factor for the decision of engine power, pollutant emission and the design of intake manifold system. Three kinds of fuel which has other physical properties are chosen in this study, and it is observed using an image processing method that the mechanism and structure of free fuel spray with a throttle type gasoline injector, and the detailed characteristics of droplet size and velocity distributions are obtained by macro and micro-scopic measuring method respectively. It is verified that the initial breakup behaviors are depended on We like the result of Reitz's study, and also observed that the spray of octane and solvent with Re of 210~330 and 270~330 respectively are better than ethanol which has relatively high density and viscosity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.556-560
• /
• 1996

In order to examine thd accuracy of intersection counting method, the fiber orientation distribution of simulation figure platted by PC is measured using image processing. The fiber orientation distribution obtained by an image processing method is compared with those by the intersection counting method. The result shows that the errors of the intersection counting method are large because its measurement is made by the cross point of the scanning line and the fiber.

• 한국안전학회지
• /
• 제11권2호
• /
• pp.25-32
• /
• 1996

This paper describes an experimental study of growing ductile crack-tip behaviors by means of computer image processing technique and finite element method. Here, the displacement field near a crack-tip is first measured by the computer image processing technique. Combined with the finite element technique, strain and stress fields are evaluated from the measured displacement. Then, crack-tip parameters such as J-integral are evaluated using the obtained displacement, strain and stress fields. The present technique Is applied to a growing crack problem of tensile CT specimen made of 304 stainless steel. The ductile crack growth behaviors accompanied by unloading are discussed in detail through the comparison between the experimental and the theoretical results.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.171-182
• /
• 1998

An automated surface-strain measuring system using the image processing technique is developed in the present study, which consists of the hardware to capture and to display digital images, and the software to calculate the 3D informations of grid points from two views. New or improved algorithms the mapping and establishing correspondence of grid points and elements, the camera calibration, and the subpixel measurement of grid points, are implemented. As an application of the present system the surface-strains of deformed blanks in the limitting dome height test, the square cup deep-drawing and punch stretching to obtain the forming limit diagram are measured. The results are compared with those obtained by conventional manual methods.

• 소성∙가공
• /
• 제7권6호
• /
• pp.575-585
• /
• 1998

An automated surface-strain measuring system using the image processing technique is developed in the present study which consists of the hardware to capture and to display digital images. and the software to calculate the 3-D informations of grid points from two views. New or improved algorithms for the mapping and establishing correspondence of grid points and elements the camera calibration and the subpixel measurement of grid points are implemented. As an application of the present system the surface-strains of deformed blanks in the limitting dome height test the square cup deep-drawing and punch stretching to obtain the forming limit diagram are measured. The results are com-pared with those obtained by conventional manual methods.

• 식물병연구
• /
• 제24권1호
• /
• pp.41-51
• /
• 2018

국내 과수 화상병은 2015년 사과 및 배에서 발생하여 큰 피해를 주고 있으나, 이에 대한 적절한 방제제는 등록되어 있지 않다. 다만 농촌진흥청은 무름병과 세균점무늬병 등 다른 식물세균병해에 등록되어 있는 살세균제들을 직권등록 시켜놓은 상태이다. 그러나 직권등록이란, 약효는 보증하지 않으면서 약해만을 보증하는 제도로, 국내에서 과수 화상병이 지속적으로 발생되고 있는 상황에서는 적절한 방제제를 선발하는 것이 요구되어지기에 본 연구를 수행하였다. 직권등록 국내 과수 화상병 방제제 중, 각각 4종의 농용항생제와 구리 합성 화학물 그리고 생물학적 방제제 2종에 대한 기내 검정법을 통하여 국내 과수 화상병원세균 억제 및 병징확산 억제효과를 검증하였다. Kasugamycin, Oxytetracycline 및 streptomycin의 항생제는 효과가 우수하였으며, oxolinic acid는 꽃에서의 억제효과는 우수하였지만 신초 및 미성숙과 기내검정에서는 다소 효과가 감소하였다. 4종의 구리 합성 화학물은 항생제만큼의 억제효과는 나타내지 않았지만, 사용가능한 수준으로 조사되었다. 또한 2종의 생물적 방제제는 처리시기 등을고려할 경우, 친환경 재배지에서는 사용 가능할 것으로 판단되었다. 한편 국내 과수 화상병원세균은 선발 방제제 중 항생제 저항성 유전자들을 가지고 있지 않고,화분매개충에 대한 영향도 없는 것으로 조사되었다.

• 비파괴검사학회지
• /
• 제14권2호
• /
• pp.101-111
• /
• 1994

전자처리스페클패턴간섭법을 CW 레이저에 비디오 시스템과 화상 처리 장치를 조합하여 평판의 변위를 측정하는데 이용하였다. 과거의 스트레인 게이지나 모아레법과는 달리 전자처리스페클패턴간섭법(ESPI)은 측정물에 아무런 처리를 할 필요가 없고, 완전한 비접촉 측정이 가능하며, 또한 감도가 높은 이점이 있다. 본 연구에서 사용한 시험편은 로드셀과 같은 방향으로 하중이 걸리도록 하였다. 시험편은 평판이고 스트레인 게이지를 부착하였다. 이 연구는 전자처리스페클패턴간섭법에 의해 변위와 응력 분포를 구하여 스트레인 게이지와의 비교함으로써 전자처리스페클패턴간섭법의 측정 정밀도에 대해 검토하고자 한다.

• 한국자동차공학회논문집
• /
• 제1권2호
• /
• pp.125-133
• /
• 1993

Electronic Speckle Pattern Interferometry(ESPI) using a CW laser, a video system and image processor was applied to the rotating displacement of rigid body. ESPI require no special surface preparation or attachments and displacements between any two arbitrary points on the surface can be measured. The characteristic speckle pattern formed when imaging a scattering surface illuminated by laser light retains phase information, which can be used for interferometric measurement of surface displacement. The application of this principle to measuring in-plane displacement resolved in one direction is described, together with the novel use of television equipment to detect and process the information contained in the speckle pattern. This is faster, and more convenient and versatile than customary photographic methods.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.128-135
• /
• 2002

Burr is a projected part of finished workpiece. It is unavoidable and undesirable by-product of most metal cutting or shearing process. Also, it must be removed to improve the fit of machined parts, safety of workers, and the effectiveness of finishing operation. But deburring process Is one of manufacturing processes that have not been successfully automated, so deburring automation is strongly needed. This paper focused on developing a basic algorithm to find edge of workpiece and match two different image data for deburring automation which includes automatic recognition of parts, generation of deburring tool paths and edge/comer finding ability by analyzing the DXF drawing file which contains information of part geometry. As an algorithm fur corner finding, SUSAN method was chosen. It makes good performance in finding edge and corner in suitable time. And this paper suggested a simple algorithm to find matching point between CCD image and drawing file.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.91-95
• /
• 1997

ESPI(Electronic Speckle Pattern Interferometry) is new optical measuring method to be able to measure the surface deformations of engineering components and materials in industrial areas. Conventional measuring method of surface deformation such as the strain gauge have many demerits because it is contact and point-to-point measuring one. But ESPI that is non-contact, whole field measuring method can overcome previous disadvantages. The speckle pattern to be formed with interference phenomena of scattering light from rough surfaces illuminated by laser light have phase information of surface In this study we used this interference phenomena and the phase shifting method to measure the in- plane deformation, together with the use of digital equipment to process the information contained in the speckle pattern and to display consequent inter ferograms. Finally we obtained good agreement between the experimenta results and those of FEM..