• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.268-277
• /
• 2017

In this study, lignocellulose nanofibrils (LCNFs) were prepared from Pussy willow wood powder by disk-milling after pretreatment using the cosolvent of 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac) and N,N-dimethylformamide (DMF) with different mixing ratios for different time. All pretreated samples showed native cellulose I polymorph and cellulose crystallinity was lowest when cosolvent of DMF with 30% [EMIM]Ac was used. Average crystallite size of raw material and the pretreated product by MDF and its cosolvent with 10% [EMIM]Ac was found to be about 3.2 nm and decreased with increasing pretreatment time at the DMF cosolvent with 30% [EMIM]Ac. Defibrillation efficiency was improved by loosening wood cell wall structure by the pretreatment using co-solvent system of [EMIM]Ac and DMF.

• Journal of Korea Foresty Energy
• /
• v.21 no.2
• /
• pp.62-68
• /
• 2002

Adiabatic property of plywood wall panel was examined to evaluate their thermal conductivities. The amount of heat loss was investigated through overall heat transmission experiment. Styroform and grass wool showed less heat loss. However, yellowsoil board and laminated lumber showed high volume specific heat capacity. When the changes of indoor and outdoor temperature were checked in model house, wall manufactured with styroform and grass wool was affected easily by the changes of outdoor temperature. Yellowsoil, the mixed board of yellowsoil and sawdust, and laminated lumber, which have high volume specific heat capacity, were not affected much. The rates of overall heat transmission were much better in styroform and grasswool, but the adiabatic properties were much higher in yellowsoil board and the mixed board of yellowsoil and sawdust. The results showed that the insulating material can be developed using yellowsoil and wood, which are nature friendly materials.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.130-131
• /
• 2015

These days, as the usage of explosive gas is increased, the demand of safety of explosive gas is increased. As a suggestion of protection against the explosive gas, the research on application of fiber-reinforced concrete has been conducted. In this research, therefore, to evaluate the constructability of anti-explosive concrete, the engineering properties of the FRC after pumping is studied.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.22-23
• /
• 2015

For the facility using explosive gas, it is very important to use anti-explosive structure. Therefore, using FRC of high stiffness should be used, but the research on actual application under the construction conditions is not sufficient. Hence, in this research, based on the case study on application of FRC for anti-explosive structure, the strength characteristics of FRC with combined fibers were evaluated comparing between before and after the pumping.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.171-172
• /
• 2002

나노미터 규모의 작은 충전제 입자는 마이크로 미터 규모의 일반적인 충전제 입자에 비해서 많은 다른 점이 발견되어 왔다. 이 연구에서는 최근에 알게된 입경이 100nm 이하인 ZnO 입자가 radical 중합된 고분자의 열안정성을 향상시키는 현상을 보다 자세하게 연구한 것이다. HDPE, LDPE, LLDPE, PP 및 PS를 열분해가 아주 느리게 일어나는 낮은 RPM으로 Haake사의 Torque Rheometer의 internal mixer 안에서 녹인 후 평균입경 49nm인 ZnO 나노입자를 약4분간 충부히 분산되도록 혼합하고 50 RPM으로 혼합속도를 높여서 시간에 따른 Trque의 변화를 측정하므로써 열안정성 효과를 관찰하였다. (중략)

• Textile Coloration and Finishing
• /
• v.10 no.6
• /
• pp.33-41
• /
• 1998

이 연구는 염색성이 열악한 polypropylene(PP) 섬유의 염색성을 개선하기 위해 추진한 것이다. 연구목적에 따라서 PP 섬유를 개질하기 위해 1차 cellulosic유도체를 추출하고 이 유도체와 PP를 9：1의 혼합비율로 섞어 master batch를 만든 다음 master batch 17%와 PP를 blending하여 개질 PP를 만들었다. 이렇게 제조된 개질 PP는 혼합된 변성 cellulosic polymer의 영향으로 착색이 심하게 되어 있으므로 이를 표백하는 것을 이 연구의 목적으로 하였다. 연구결과 blend한 개질 PP(Grand P)의 혼화성이 우수하였고, 아염소산나트륨에 표백적성을 가지며, 표백의 최적조건은 표백제의 농도가 0.1% $NaClO_2$, 표백온도 $70^\circ{C}$, 표백시간 30분이었다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.1
• /
• pp.72-78
• /
• 1999

The purpose of this study was to evaluate the properties of unconfined strength of dry soil which was reinforced with polypropylene fiber. It is found that unconfined compressive strength and strain of dry soil without fiber were decreased as water content was increased. As mixing ration of fiber was increased , unconfined compressive strength and failure strain of dry soil reinforced with polypropylene fiber were increased. When mixing ration was larger than 0.5 % , unconfined compressive strength was gradually increased. The longer fiber was, the largest post peak strength was obtained and the larger strain was reached. Tensile strength of dried fiber reinforced soil was larger than that of dry soil without fiber.

• The Journal of Natural Sciences
• /
• v.9 no.1
• /
• pp.169-175
• /
• 1997

In this study, it was investigated about dyeability, light-fastness, wash-fastness and tensile strength in PET fiber using the effective carrier solvent such as benzyl alcohol, benzaldehyde and acetophenone. As a results, dyeability in mixed solvent was better than that of single solvent. And dyeability in mixed solvents of benzyl aldehyde and acetophenone was of them. But effective carrier action was resulted in decrease of properties such as light-fastness and tensile strength of PET fiber after dyeing.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.72-79
• /
• 1996

Cellulose I에서 Cellulose II로의 결정변태기구를 X선 및 전자선 회절법과 현미경적 방법을 이용하여 구명하였다. X선 회절 결과, Na-cellulose I을 고온에서 수세할 경우 Cellulose I과 Cellulose II의 혼합형 회절도가, 저온에서 수세할 경우 Na-cellulose IV의 회절도가 얻어졌다. 전자선회절 결과, 고온수세의 시료는 Cellulose I과 Cellulose II의 혼합형이 저온수세의 시료는 Cellulose II의 회절도가 얻어졌다. 또한 고온수세 시료의 전자선회절도로부터 섬유벽의 내측부가 외측부보다 재생 Cellulose I의 양이 많은 것이 확인되었다. 따라서 알칼리 팽윤시 섬유벽내에는 불완전한 팽윤이 발생하는데 그 정도는 내측부가 더욱 심한 것으로 생각된다. 이때 형성되는 불완전한 Na-cellulose I 은 고온 수세의 경우는 탈수에 의해 Cellulose I로, 저온수세의 경우는 수화에 의해 Cellulose II로 변태되지만 완전히 팽윤된 Na-cellulose I은 Cellulose I로 재생될 수 없는 것으로 생각된다. 현미경적 실험결과, mercerization과정에서 cellulose 분자쇄의 packing이나 conformation의 변화와 관련하여 microfibril 의 흐트러짐은 발생하지 않는 것으로 생각되었다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.188-195
• /
• 2014

This paper was evaluated the rheology properties according to each step of paste, mortar and HPFRCC as a part of the basic study to development of sprayed high performance fiber reinforced cementitious composites(HPFRCC) for protection and blast resistant. Rheology test results in step of paste, in case of GGBFs and FA, it showed that the plastic viscosity and yield stress reduced gradually according to the increase of mixing rate, and in case of SF, the plastic viscosity and yield stress increased radically starting from the mixing rate of 10%. Rheology test results in step of mortar, type of aggregates, it showed that particle shape and grading of aggregate is influence on plastic viscosity and yield stress, and change of volume ratio is influence on plastic viscosity than yield stress. Fluidity and rheology test results in step of HPFRCC, if after a fiber mixed, it showed that viscosity agent is more effective to improve the fluidity and fiber dispersion than superplasticizer.