• Journal of the Korean Chemical Society
• /
• v.37 no.11
• /
• pp.923-928
• /
• 1993

The series of solid solutions in the $Sr_{1+x}Ho_{1-x}FeO_{4-y}$ (x = 0.00, 0.25, 0.50, 0.75 and 1.00) systems with $K_2NiF_4$ type structure have been prepared at 1550$^{\circ}$C under an atmospheric air pressure. The X-ray powder diffraction spectra of these samples assign that the crystallographic phases are tetragonal system over the whole x range. The lattice volume was increased with increasing the substitution amount of the $Sr^{2+}$ ion. The mole ratio of the $Fe^{4+}$ ion to total iron ions or ${\tau}$ value has been determined by Mohr salt titration of the sample and then the y value was calculated from x and ${\tau}$ values. The ${\tau}$ and y values have been increased with x values. The nonstoichiometric chemical formula are formulated from the general formula of $Sr_{1+x}Ho_{1-x}Fe^3_{1-}\;^+_{\tau}Fe_{\tau}^{4+}O_{4-y}$ replaced by x,${\tau}$ and y values. Mossbauer spectra show the mixed valence state and coordination state of $Fe^{3+}\;and\;Fe^{4+}$ ions. It is found out that the magnetic property of the samples is paramagnetic at room temperature. Electrical conductivity varied within the semiconductivity range of 1.0 to 1 ${\times}\;10^{-9}{\Omega}^{-1}cm^{-1}$. Activation energy of the electrical conductivity was decreased with the $\tau$ value. The conduction mechanism should be explained by the hopping model of the conduction electrons between the valence states of $Fe^{3+}\;and\;Fe^{4+}$ ions.

• Korean Journal of Food Science and Technology
• /
• v.52 no.1
• /
• pp.89-93
• /
• 2020

Vibrio vulnificus, an opportunistic pathogen, causes septicaemia when raw shellfish and fish are eaten by patients with hepatic diseases or reduced immunity. In this study, we evaluated inhibitory effects of some natural products on V. vulnificus growth using 96-well microplate assay. We found that Phyllanthus emblica L., Rosa chinensis Jacq., Rosa rugose Thub., and Chukrasia tabularis A. Juss. significantly inhibited V. vulnificus growth in Luria-Bertani (LB) broth. Among these four extracts, the inhibition diameter of Chukrasia tabularis was 16.00 ± 0.58 mm in disc diffusion assay on V. vulnificus growth. In addition, these four natural products protected HeLa cells from V. vulnificus-induced cytotoxicity. A cocktail containing these four products showed an inhibitory effect on V. vulnificus growth in seawater and shellfish by reducing its growth by 75.7% and 97%, respectively. These results suggest that these four natural products are safe and effective natural antimicrobial candidates to prevent V. vulnificus infection.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.377-382
• /
• 2020

A sequential design of experiments was employed to optimize MOF-235 synthesis for acetylene adsorption process. Two experimental designs were applied: a two-level factorial design for screening and a central composite design, one of response surface methodologies (RSM). In this study, 2³ factorial design of experiment was used to evaluate the effect of parameters of synthesis temperature and time, and also mixing speed on crystallinity of MOF-235. Experiments were conducted 16 times follwing MINITAB 19 design software for MOF-235 synthesis. Half-normal, pareto, residual, main and interaction effects were drawn based on the XRD results. The analysis of variance (ANOVA) of test results depicts that the synthesis temperature and time have significant effects on the crystallinity of MOF-235 (response variable). After screening, a central composite design was performed to optimize the acetylene adsorption capacity of MOF-235 based on synthesis conditions. From nine runs designed by MINITAB 19, the result was calculated using the second order model equation. It was estimated that the maximum adsorption capacity (18.7 mmol/g) was observed for MOF-235 synthesized at optimum conditions of 86.3 ℃ and 28.7 h.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.41-41
• /
• 2000

부유부상 공정은 현재 신문고지와 사무용 고지의 탈묵을 통한 신문용지 및 화장지 제조 에 널리 사용되고 있는 고지재활용을 위한 핵심공정이다. 하지만 이들 공정은 갈수록 열악 해지는 국내 고지원료의 품질변화에 따라서 잉크 및 토너의 분리효율이 저하되고 있어 생산 되는 탈묵 펄프의 품질저하, 리젝트 발생량의 증대, 폐수 처리공정의 부하 증가 등 다양한 문제점을 발생시키고 있어 이에 대한 대책의 수립이 시급히 요청되고 있다. 현재와 같이 다양한 형태의 잉크 및 인쇄방식으로 인쇄된 많은 종류의 재활용지가 원료 로 투입되고 있는 경우 탈묵공정의 효율 향상을 위해서는 부유부상 공정에 대한 좀 더 체계 적이고 논리적인 접근이 필요하다. 이러한 문제점을 극복하기 위해 먼저 고지 재활용 공정 의 핵심 단위공정인 부유부상 공정에 관련된 복잡한 문제점을 단순화하여 고상 및 액상의 표면화학적 특성을 평가하고, 이에 따른 부유부상 공정의 효율을 분석하였다. 본 연구에서는 부유부상 공정을 기초과학적 측면에서 구명하기 위해 마이크로 크리스탈린 셀룰로오스(Microcrystalline cellulose: MCC)를 모델 물질로 사용하였고, 친수성 의 표면 특 성을 나타내는 MCC의 표면 특성을 바꾸기 위하여 AKD(alkyl ketene dimer)로 처리비율을 달리하여 사이징 처리하였다. 부유부상 실험에 사용된 MCC는 친수성을 띠는 것과 소수성 을 부여한 것을 구별하고 그 비율을 백색도를 통해 측정하기 위하여 자체적으로 친수성을 가지는 MCC는 세척 견뢰도가 높은 검은색 염료로 염색하였다. 준비된 친수성과 소수성 M MCC의 혼합비율 별로 패드를 작성하여 백색도를 측정함으로써 검량선을 작성하였다. 또한 부유부상 시간에 따른 제거효율을 알아보기 위하여 부유부상 시간별로 각각의 리젝트율과 수율올 측정하고, 리젝트 시료로부터 패드를 제조하여 백색도를 측정하였다. 실험 결과 소수성 MCC의 소수화 정도에 따라서 리젝트율이 증가하였으며, 이를 통해 표 면에 소수성을 띠는 입자는 소수성이 강할수록 부유부상공정에서 제거율이 증가한다는 것을 확인하였다. 부유부상 처리한 MCC로 패드를 제조한 뒤 백색도를 비교한 결과에서도 이를 확인하였다. 한편 리젝트로 함께 제거된 MCC 내에 존재하는 친수성 MCC의 양은 극히 미 세하였다. 또한 부유부상를 실시하는 초기에 상당량의 리젝트가 발생함을 확인하였는데, 이 는 전체 부유부상을 통해 제거되는 양의 45-68%였다. 한편 부유부상이 진행됨에 따라서 리젝트 양의 증가폭이 둔화되는 경향을 나타내었다. 이러한 경향은 MCC의 소수성이 강할 수록 더욱 뚜렷하게 나타났다. 이를 통해 계 내로부터 소수성인 물질이 급속하게 제거됨을 알 수 있었으며 필요 이상의 부유부상 처리는 잉크제거 효율을 높일 수는 있으나 소모되는 시간에 비하여 비효과적임을 알 수 있었다.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.280-287
• /
• 2003

To evaluate the practical application of oyster shells(OS) as construction materials, an experimental study was performed. More specifically, the long-term mechanical properties and durability of concrete blended with oyster shells were investigated. Test results indicate that long-term strength of concrete blended with 10% oyster shells is almost identical to that of normal concrete. However, the long-term strength of concrete blended with 20% oyster shells is appreciably lower than that of normal concrete. Thereby, concrete with higher oyster shell blend has the possibility of negatively influencing the concrete long-term strength. Elastic modulus of concrete blended with crushed oyster shells decreases as the blending mixture rate increases. Namely, the modulus is reduced to approximately 10∼15% when oyster shells are blended up to 20% as the fine aggregate. The drying shrinkage strain increases with an increasing crushed oyster shells substitution rate. In addition, the existing model code of drying shrinkage and creep do not coincide with the test results of this study. An adequate prediction equation needs to be developed. The utilization of oyster shells as the fine aggregate in concrete has an insignificant effect on fleering and thawing resistance, carbonation and chemical attack of concrete. However, water permeability is considerably improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.512-520
• /
• 2020

Recently, the applications of the standing column well (SCW) ground heat exchanger (GHX) have increased significantly in Korea as a heat transfer mechanism of ground source heat pump systems (GSHP) because of its high heat capacity and efficiency. Among the various design and operating parameters, bleeding was found to be the most important parameter for improving the thermal performance, such as ground thermal conductivity and borehole thermal resistance. In this study, a bleeding analysis model was developed using the thermal response test data, and the effects of bleeding rates and bleeding locations on the thermal performance of anSCW were investigated. The results show that, when the ground water flows into the top of anSCW, the time variation of circulating water temperature decreased with increasing bleeding rate, and the ground thermal conductivity increases by as much as 179% with a 30% bleeding rate. When the ground water flows into the bottom of the SCW, the circulating water temperatures become almost constant after the increase in the beginning time because the circulating water exchanges heat with the ground structure before mixing with the ground water at the bottom.

• Journal of Korea Multimedia Society
• /
• v.5 no.5
• /
• pp.512-522
• /
• 2002

In this paper, we propose a hybrid method which is mixed with frame selection and weighting model rank method, based on GMM(gaussian mixture model), for real-time text-independent speaker recognition system. In the system, maximum likelihood estimation was used for GMM parameter optimization, and maximum likelihood was used for recognition basically Proposed hybrid method has two steps. First, likelihood score was calculated with speaker models and test data at frame level, and the difference is calculated between the biggest likelihood value and second. And then, the frame is selected if the difference is bigger than threshold. The second, instead of calculated likelihood, weighting value is used for calculating total score at each selected frame. Cepstrum coefficient and regressive coefficient were used as feature parameters, and the database for test and training consists of several data which are collected at different time, and data for experience are selected randomly In experiments, we applied each method to baseline system, and tested. In speaker recognition experiments, proposed hybrid method has an average of 4% higher recognition accuracy than frame selection method and 1% higher than W method, implying the effectiveness of it.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.675-682
• /
• 2005

Al containing mesoporous molecular sieve (Al-MMS) was synthesized by hydrolysis of $H_2SiF_6$ and $Al(NO_3)_3{\cdot}9H_2O$. The material obtained was characterized by XRD, $N_2$-physisorption. The specific surface area was $981m^2/g$, and the average pore size was uniformity $39{\AA}$. It was confirmed that the acidity of Al-MMS was milder than that of zeolite Y based on the results of $NH_3$-TPD. Active materials, Pt and Pd, were loaded on Al-MMS in order to examine the feasibility of using Al-MMS as a catalyst support in the hydrogenation of aromatic compounds included in the residue oil of a naphtha cracker. The hydrogenation activity of PtPd/Al-MMS has been studied by following the kinetics of the hydrogenation of naphthalene, and by comparing the kinetic parameters obtained with Pt and Pd catalysts supported on the other mesoporous material support and commercial conventional support materials. PtPd/Al-MMS catalyst shows the highest activity of hydrogenation and sulfur resistance. The high activity of PtPd/Al-MMS was confirmed again in the hydrogenation of PGO (pyrolized gas oil), which is residue oil obtained from a naphtha cracker. Therefore, PtPd/Al-MMS can be applied to the hydrogenation of aromatic compounds included in the residue oil of a commercial naphtha cracker commericially.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1094-1103
• /
• 2012

Recently, software industry regarding national defense increases system development of distributed simulation system of M&S based to overcome limit of resource and expense. It is one of key technologies for offering of mutual validation among objects and reuse of objects which are discussed for developing these systems. RTI, implementation of HLA interface specification as software providing these technologies uses Federation Object Model for exchanging information with joined federates in the federation and each federate has a characteristic that is supposed to have identical FOM in the federation. This technology is a software which is to provide the core technology which was suggested by the United state's military M&S standard framework. Simulator, virtual simulation, and inter-connection between military weapons system S/W which executes on network which is M&S's core base technology, and it is a technology which also can be used for various inter-connection between S/W such as game and on-line phone. These days although RTI is used in military war game or tactical training unit field, there is none in Korea. Also, it is used in mobile-game, distribution game, net management, robot field, and other civilian field, but the number of examples are so small and informalized. Through this developing project, we developed the core technique and RTI software and provided performance of COTS level to improve communication algorithms.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.4
• /
• pp.175-182
• /
• 1998

Recently it is reported that anomalously low saline surface waters (salinity < 32) occurred at the Ulleung Basin in the East Sea-Japan Sea, during early September to November 1996. Apparent source of such a low saline watermass seems remotely linked to the Changjiang Dilute Water (CDW), which expands to the vicinity of Cheju Island during a flood season. Based on the assumption that waters passing through the Western Channel of the Korea Strait are formed by a mixing of Kuroshio Water and CDW, simplified two end-member mixing model using $^{228}Ra/^{226}Ra$ as a conservative tracer is applied to calculate the contribution of each end member for the formation of low saline surface seawater. Model calculations show CDW contributes $58{\pm}3%$ in September 1996 (S=32.17) and $10{\pm}3%$ in February 1997 (S=34.53) in the formation of surface water flowing into the Western Channel of the Korea Strait. Although results arc deduced from a simplified model with limited data, this study demonstrates that Changjiang discharge is clearly traceable to the interior of the East Sea-Japan Sea in fall season. Undergoing Three Valley Dam construction in the Changjiang River would invoke inevitable changes in the nature and discharge of CDW and its impacts on the marine environment might be significant in the northern East China Sea and even in the Ulleng Basin for coming decades.