• Journal of Forest and Environmental Science
• /
• v.21 no.1
• /
• pp.16-23
• /
• 2005

The leaves of Paulownia Coreana Uyeki were collected, extracted with acetone-$H_2O$(7:3, v/v), fractionated with n-hexane, methylene chloride and ethylacetate, and freeze dried to give some dark brown powder. The ethylacetate soluble mixture was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. Spectrometric analysis such as NMR and MS including TLC were performed to characterize the structures of the isolated compounds. From the ethylacetate fraction, five flavonoides and three phenolic acids were isolated and determined.

• Clean Technology
• /
• v.16 no.2
• /
• pp.140-144
• /
• 2010

Titania-silica composite materials were obtained by sol-gel method from TiCl4 and TEOS precusors, and they were applied to anode materials of lithium ion battery. Uniformly distributed composite materials can be manufactured by sol-gel method. The composite materials were heat treated by microwave to obtain materials with new properties. The experimental variables were composition of the material, heat treatment temperature, and microwave exposure. The structure and surface properties of the materials were analyzed by XRD, SEM, and the electrochemical capacity was measured with charge/discharge cycler.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.301-304
• /
• 2002

화재대피용 방독마스크의 주요한 기능은 상온에서의 일산화탄소 제거이며, 가장 효과적인 방법은 촉매에 의한 것이다. 일산화탄소 제거를 위한 호흡용 보호구의 정화통 충진재로써 범용으로 쓰이는 촉매는 Hopcalite로 Cu와 Mn이 혼합된 산화물 촉매이다. 그러나 이들 촉매는 상온에서 CO의 제거효율이 낮아 많은 양을 충진해야 하는 어려움이있다.(중략)

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.168-169
• /
• 2011

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.05a
• /
• pp.48-49
• /
• 2013

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.665-672
• /
• 1997

We applied mechanical alloying process by ball milling to produce molybdenum silicides $MoSi_2$ and $Mo_5Si_3$ using a mixture of elemental molybdenum and silicon powders at room temperature. The intermetallic compound MoSi$_3$ have been obtained by ball milling of $Mo_{33}Si_{67}$ mixture powders for 100 h, which is transformed to single $MoSi_2$ phase by subsequent heat treatment up to $725^{\circ}C$. The grain size of the $MoSi_2$ powders thus obtained was 19 nm, being approximately four times smaller than that of the commercial alloy. The intermetallic compound $MoSi_2$ with grain size of 30 nm have been also obtained by ball milling of $Mo_{62}Si_{38}$ mixture powders for 500 h, which is transformed to single $MoSi_2$ phase by heating up to $1000^{\circ}C$. We believe that the retarded ball milling time for the formation of $MoSi_2$ phase is attributed to its complicated crystal structure and large unit cell. The finer grain size in the ball-milled molybdenum silicides powders is expected to improve room-temperature mechanical properties for high-temperature structural materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.95-96
• /
• 2006

CMOS Image Sensor(CIS) 소자에서 광감도의 향상과 천연색 형성을 위하여 적용하고 있는 Color-Filter 공정에서 국부적으로 발생하는 strip성 불량과 막질손상을 제거하기 위한 연구를 진행하였다. 우선 지역적 경향성을 보이는 불량에 대해서는 PR strip process type을 액조 진행방식에서 회전식으로 변경했을 때 제거됨을 확인하였고, 막질손상을 최소화하기 위해서는 새로운 유기용매의 적용이 필요하였다. 실험 결과, 케톤기를 가지는 화합물과 Polar Apotic 용매의 혼합화합물을 적용하였을 때 각 막질에 attack을 최소화하면서 원하는 PR만 선택적으로 제거 되며 미세잔류성분에 대한 제거력도 향상됨을 확인하였다.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.41-48
• /
• 2002

The barks of oak trees (Quercus acutissima and Quercus variabilis) were collected, extracted with acetone-$H_2O$ (7:3, v/v), fractionated with hexane, $CH^2C1^2$ EtOAc and -$H_2O$, then freeze dried to give dark brown powder. The EtOAc soluble mixtures of the trees were chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. The structures of isolated compounds were characterized by $^1H$, $^13C$ and 2D-NMR spectroscopy and molecular weights were determined by FAB-MS spectra. The isolated compounds from Quercus acutissima were (+)-catechin, (+)-gallocatechin, gallic acid and taxifolin-3-O-$\beta$-D-glucopyranoside and the compounds from Quercus variahilis (+)-catechin, caffeic acid and taxifolin-3-O-$\beta$-D-glucopyranoside.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.76-82
• /
• 2006

The dried ground needles (2.0 kg) of Chamaecyparis pisifera (Sieb. et Zucc.) Endlicher were extracted with acetone-$H_2O$ (7:3, v/v), concentrated, and fractionated with a series of n-hexane, methylene chloride, ethyl acetate and water on a separation funnel. Each fraction was freeze dried, then a portion of ethyl acetate soluble powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-n-hexane mixture as eluents. The isolated compounds were identified by cellulose TLC, $^1H$-, $^{13}C$-NMR, COSY, HETCOR, FAB and EI-MS. (+)-catechin, taxifolin-3-O-${\beta}$-D-xylopyrano-side, quercetin-3-O-${\alpha}$-L-rhamnopyranoside were isolated from the ethyl acetate soluble fraction of Chamaecypairs pisifera needle. Antioxidative tests on the isolated compounds indicated that all of the compounds showed similar values to ${\alpha}$-tocopherol and BHT as controls.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.381-385
• /
• 2009

A basic objective is the preparation and surface studies of supported molten salt catalysts because molten salts can stay as the liquid phase in the range of the ordinary reaction temperature. Many kinds of metal salt mixtures for the formation of molten salt phase are appliable but CuCl and KCl were selected in this study because Cu is considered catalytically reactive in many reactons. The loading of the molten salt was selected as 25 vol% of the total pore volume of ${\gamma}-alumina$ to provide reasonable exposed surface area. The surface structure of catalysts containing molten salts in the ${\gamma}-alumina$ was studied using scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). CuCl and KCl were added into the ${\gamma}-alumina$ using concentrated hydrochloric acid solution by the impregnation technique. The surfaces of the prepared catalysts before and after heat treatments were compared and they suggested that the heat treatment of catalysts helped the formation of molten-salt although the surface compositions of CuCl and KCl were not uniform.