• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.73-83
• /
• 2006

The dried needles (1.5 kg) of Abies koreana and Abies holophylla were ground, extracted with acetone-$H_2O$ (7:3, v/v), concentrated, and fractionated with a series of hexane, methylene chloride, ethyl acetate and water on a separatory funnel. Each fraction was freeze dried, then a portion of ethyl acetate soluble powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. The isolated compounds were identified by cellulose TLC, $^1H$, $^{13}C-NMR$, COSY, HETCOR, FAB and EI-MS. The needles of Abies koreana and Abies holophylla contained a large amount of aromadendrin-7-O-${\beta}$-D-glucopyranoside (compound III), polydatin (compound VI), (-)-rhododendrol-2-O-${\beta}$-D-glucopyranoside (compound VII), in addition to a small amount of (+)-catechin (compound I), kaempferol-3-O-${\beta}$-D-glucopyranoside (compound IV), myricetin-3-O-${\beta}$-D-glucopyranoside (compound V), naringenin-7-O-${\beta}$-D-glucopyranoside (compound II). DPPH analysis was also tested to investigate the antioxidative effects on the isolated compounds and (+)-catechin and polydatin were effective.

• Microbiology and Biotechnology Letters
• /
• v.33 no.4
• /
• pp.288-294
• /
• 2005

Flavonoid compounds show several biological activities and generally exist in the forms of glycones linking sugar moiety to main structure. Flavonoid glycones such as naringin and hesperidin in korean citrus peel are slower absorbed and consequently less active than their aglycone, naringenin and hesperetin, respectively. Therefare to increase the content of flavonoid aglycone in korean citrus peel, we used commercial carbohydrate-hydrolysing enzymes, AMG 300 L, Pectinex 100 L, and Viscozyme for transforming flavonoid glycones to aglycones. Optimal conditions of enzyme reaction were pH 5.0-7.0, $5\%$ enzyme, and 24-48 hrs. The content of naringenin and hesperetin as flavonoid aglycones in untreated citrus peel is $100\~200\;ng/g$ of dried citrus peel. In case of enzyme-treated citrus peel the content of naringenin and hesperetin increased to $1,539\∼6,674\;ng/g\;and\;1,974\∼8,906\;ng/g$ of dried citrus peel, respectively. Finally the content of flavonoid aglycones could be extracted to 10-80 times. Now enzyme-treated citrus peel may be applied to use for functional food because of its higher flavonoid aglycones as more active compounds.

• Journal of Environmental Science International
• /
• v.11 no.10
• /
• pp.1109-1116
• /
• 2002

This study analyzed concentrations of volatile organic compounds (VOCs) produced from incineration of papers at $600^{\circ}C$. The papers used in this study included A4 papers (new, printed with ink-jet, printed with carbon), newspapers (printed with bean oil, printed with a general newspaper ink), packaging box, document envelope, single-use paper cup, and cosmetic tissue. Papers were heated from room temperature upto $600^{\circ}C$ providing air inside of the electric furnace and then they were oxidized for 80 minutes at $600^{\circ}C$ maintaining the same air supply. VOCs emitted from the incineration process were sampled using an air sampling pump and bags for 160 minutes and then the components and concentrations of the VOCs were analyzed by a CC-MS. The most prominent chemical structure of the Vous identified from incineration of the papers was furans and then furans were followed by aromatics and aliphatic alkenes. About 40% of the identified VOCs contained double bonds, which have relatively a high ozone (ground level) formation potential, within their molecular structure. Also, some cancer suspecting compounds like benzene, dichlorormethane and chloroform were identified.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.51-57
• /
• 2013

We have applied mechanical alloying (MA) to produce Heusler $Fe_2VAl$ thermoelectric alloy using a mixture of elemental $Fe_{50}V_{25}Al_{25}$ powders. An optimal milling and heat treatment conditions to obtain the single phase of Fe2VAl compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry (DSC) measurement. The $Fe_{50}V_{25}Al_{25}$ MA sample ball-milled for 60 hours exhibits a bcc ${\alpha}$-(Fe,V,Al) solid solution. Single phase of Heusler $Fe_2VAl$ compound can be obtained by MA of $Fe_{50}V_{25}Al_{25}$ mixture for 60 hours and subsequently heated up to $700^{\circ}C$. Sintering of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $900{\sim}1000^{\circ}C$ under 60 MPa. The Vickers hardness of bulk sample sintered at $1000^{\circ}C$ was high value of Hv 870. All compact bodies have a high relative density above 90 % with metallic glare on the surface.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.3
• /
• pp.121-127
• /
• 2007

We have applied mechanical alloying (MA) to get $Mg_2Si$ thermoelectric material with nano-sized grains. An optimal milling and heat treatment conditions to obtain the single phase of $Mg_2Si$ compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry (DSC) measurement. The $Mg_{66.7}Si_{33.3}$ MA samples ball-milled for $20{\sim}180\;hrs$ exhibit two broad exothermic heat releases around $220^{\circ}C$ and $570^{\circ}C$. On the other hand, MA sample ball-milled far 260 hrs exhibits only a sharp exothermic peak at $230^{\circ}C$ Single phase Mg2Si powder can be obtained by MA of $Mg_{66.7}Si_{33.3}$ mixture for 60 hours and subsequently heated up to $620^{\circ}C$. Sintering of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $800{\sim}900^{\circ}C$ under 50 MPa. The shrinkage of sintering sample during SPS was significant at about $200^{\circ}C$. All compact bodies have a high relative density above 94% with metallic glare on the surface.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.768-777
• /
• 2015

Persimmon contains high levels of vitamins and phenolic compounds, as well as soluble solids, necessary for the fermentation of persimmon wine. Co-fermentation of persimmon wine was carried out using a mixed culture of Pichia anomala JK04, a Korean indigenous yeast that improves wine quality and flavor, and Saccharomyces cerevisiae Fermivin, an industrial wine yeast, in the following ratios: 9:1 (v/v), 5:5 (v/v), 1:9 (v/v) and 0:10 (v/v). During fermentation, the alcohol contents increased more slowly in samples of mixed culture than in samples of the single culture of S. cerevisiae Fermivin. The alcohol contents of all samples reached 12~13% (v/v) after 15 days. All samples of the mixed culture showed greater variety in flavor and taste than S. cerevisiae Fermivin only. In the sensory evaluation, mixed culture samples had higher scores in terms of flavor and overall preference than the single culture samples. Therefore, P. anomala JK04 is thought to improve the wine flavor of Korean domestic persimmon wine.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.689-694
• /
• 2006

The system performance of a bioactive foam reactor (BFR), that consists of a foam column using a surfactant and a biodegradation basin containing suspended bacteria, was investigated for the treatment of gaseous toluene or a mixture of four volatile organic compounds (VOCs, benzene, toluene, p-xylene, and styrene). Overall, the BFR achieved stable VOC removal efficiencies, indicating that it can be used as a potential alternative over conventional packed-bed biofilters. Furthermore, a dynamic loading test showed that relatively constant removal was maintained at the elevated loading due to a high mass transfer rate in the foam column. However, as the inlet concentration of VOCs increased, a portion of the VOCs mass-transferred to the liquid phase was stripped out from the biodegradation basin, resulting in a decrease in the overall removal efficiency. In the BFR, the removal efficiency of the individual VOC was mainly determined depending on the biodegradation rate (styrene > toluene > benzene > p-xylene), rather than the mass transfer rate. Consequently, increases in the microbial activity and the volume of the basin could improve the overall performance of the BFR system. Further investigation on microbial activity and community dynamics is required for the BFR when subjected to high loadings of VOC mixtures.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.135-141
• /
• 2013

Mechanical alloying was carried out to produce $CrSi_2$ thermoelectric compound using a mixture of elemental $Cr_{33}Si_{67}$ powders. An optimal milling and heat treatment conditions to obtain the single phase of $CrSi_2$ compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry measurement. $CrSi_2$ intermetallic compound with a grain size of 70 nm could be obtained by MA of $Cr_{33}Si_{67}$ powders for 70 hours and subsequently annealed at $650^{\circ}C$. Consolidation of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $600{\sim}1000^{\circ}C$ under 60 MPa. The shrinkage of MA samples during SPS consolidation process increased gradually with increasing temperature up to $1000^{\circ}C$ and relatively significant at about $600^{\circ}C$. We tend to believe that these behaviors are deeply related to form a $CrSi_2$ compound during heating process, as can be realized from the DSC measurement. Electrical conductivity and Seebeck coefficient of sintered bodies were measured up to $900^{\circ}C$. Seebeck coefficient and power factor of $Cr_{33}Si_{67}$ compact prepared by MA and SPS at $1000^{\circ}C$ showed the maximum value of $125{\mu}V/K$ at $400^{\circ}C$ and $4.3{\times}10^{-4}W/mK^2$ at $350^{\circ}C$, respectively.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.487-492
• /
• 2007

Using the selective host-guest inclusion of $G_2$[naphthalene disulfonate], the structural isomers of 1,2-dibromobenzene and 1,3-dibromobenzene were separated. As such, 1,3-dibromobenzene was selectively included as guest into the host framework in mixture isomers over 30% fraction of 1,3- dibromobenzene ($X_{1,3-DBB}=0.3$) whereas 1,2-dibromobenzene as guest was selective to the inclusion below $X_{1,3-DBB}=0.3$. This was due to the selectivity of host framework toward the guest molecules playing a role of template to the host framework. From the powder pattern XRD of inclusion compounds crystallized in pure isomer and mixture solutions, the template roles of guest molecules to the host framework were confirmed. Using the DSC, it was found that the more energy was required to release 1,3-dibromobenzene of guest from the host framework than 1,2-dibromobenzene due to the higher thermal stability. The thermal stability of the $G_2NDS$-1,3-dibromobenzene inclusion compound was consistent with the high selectivity of 1,3- dibromobenzene to the host framework in broad range of fraction in the isomer mixture

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.301-306
• /
• 2000

케이블 절연파괴 사고에 관한 여러 통계에서 사고원인을 검토하여 보면, 전기트리, 열화, 침수의 순서로 발생하였으며, 전기트리에 의한 사고가 60%이상을 차지하고 있다［1］. 전기트리에 관한 억제책으로는 제조공정상의 개선, 블렌드 또는 공중합체를 이용하는 방법 또는 첨가제를 혼합하여 특성을 개선시키는 방법 등이 있다. 공정상의 개선은 어느 정도 한계에 이르렀으며, 공중합체를 만드는 것은 반응기를 수정해야 하는 어려움이 따라 활발하게 이용되지 못하고 있다.(중략)