• Journal of the Korean Magnetics Society
• /
• v.11 no.4
• /
• pp.157-162
• /
• 2001

Rheological characteristics of Sm-Co type plastic magnet compound for powder injection molding process were investigated with the variation of the magnetic powder size, their relative contents and volume fraction using the mixture of fine and coarse powder. Shear viscosity of Sm-Co type compound was decreased with increasing the size of coarse powder due to the increase of powder packing density. However, the smaller the average size of fine powder resulted in the higher viscosity of compound due to the increase of agglomeration force. In case of mechanically milled Sm-Co type powder, the viscosity of compound with the mixture of coarse powder of 125∼75 ㎛ and fine powder of average size of 4.9 ㎛ greatly depends on their relative contents and shows a minimum value at the 60 % coarse powder fraction. This means that the compound shows a maximum packing density at the 60% coarse powder fraction. Compound viscosities satisfied well the rheological model with the volume fraction of magnetic powder, and maximum volume fraction of magnetic powder in Sm-Co type compound for powder injection molding was about 66%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.3
• /
• pp.119-126
• /
• 2001

A process for the production of bioplastics from wastewater with an open microbial culture was developed and evaluated. The process consists of a selection reactor to select bacteria in feast/famine regime and an accumulation reactor to produce PHA using selected bacteria. Polyhydroxyalkanoate(PHAs) accumulating bacteria could be efficiently grown in a sequencing batch reactor(SBR) without any growth limitation. For the high production of PHA limitation such as oxygen and nutrients seemed to be needed. Accumulation experiments were performed to evaluate the level of accumulation of PHA. Limited aeration had no effect, but nutrients limitation showed high accumulation. Bacteria which were selected in the SBR could accumulate PHA till 60% of cellular dry weight in accumulation experiments under nitrogen limitation. PHA accumulation rate decreased with increasing PHA content in the cells. Clearly, PHA accumulation rate has a strong correlation with the PHA content of the cells.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.57-64
• /
• 2007

Triboelectrostatic separation of mixed three kinds of plastics, PVC, PET and PMMA, in the range of similar gravity has been performed through a two-stage separation process. Polypropylene (PP) and high-impact polystyrene (HIPS) were found to be the most effective materials for a tribo-charger in the separation of PVC, PET and PMMA. In the 1st stage using the PP cyclone charger, PVC grade and recovery depended considerably on the air velocity (10 m/s), the relative humidity (<30%), the electric field (>200 kV/m) and the splitter position (+2 cm from the center) in the triboelelctrostatic separator unit. At an optimum condition a PVC grade of 99.6% and a recovery of 97.5% was achieved. In the 2nd stage using the HIPS cyclone charger, a PMMA grade of 98.3% and a recovery of 97.0% was obtained under the conditions of 10m/s air velocity, over 250 kV/m electric field, central splitter position and less than 40% relative humidity.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1995.04a
• /
• pp.72-74
• /
• 1995

양액재배는 토양재배에서 오는 다양한 문제점들을 탈피하고자 하는 농민의 자구책이기도 하지만 유리온실과 마찬가지로 대부분의 플라스틱 온실에서도 적용할 수 있는 적절한 재배시스템, 전용양액 및 배지, 양액재배 기술의 개발 또는 실용화가 미흡한 실정이어서 양액재배 확대보급에 제한요인이 되고 있다. 본 실험은 배수성과 통기성이 우수한 배지로서 남부지방에서 이용이 확대되고 있는 perlite와 우리 주위에서 구입이 용이한 왕겨, 훈탁 등의 혼합배지를 이용하여 스티로폼 베드 및 박스재배, 플라스틱 자루재배, 포트재배 등의 재배시 재배용기와 배지의 종류에 따른 양액재배 오이의 생육 및 수량 반응성을 살펴보고, 오이의 양액재배시 기초자료로 활용하고자 수행하였다. (중략)

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.143-150
• /
• 2003

전분 완충재의 물리적, 기계적 특성을 개선하기 위한 노력들이 많이 이루어지고 있지만 기존의 플라스틱 완충재와 비교하면 더 많은 노력이 요구되어진다. 그래서 본 연구에서는 전분 완충재의 물리적 기계적 특성에 대한 유연제(plasticizers)와 첨가제(additives)의 영향을 규명하였다. 전분과 합성수지 그리고 여러 유연제 또는 첨가제를 혼합한 뒤 Brabender사의 일축 압출기를 이용하여 여러 축속도(60~120 rpm)에서 압출 가공한 후 물리적, 기계적 특성을 조사하였다. 전분 완충재의 밀도(bulk density)와 압축성(bulk compressibility)은 혼합물에서 물의 비율이 증가함에 따라 증가하였지만, 복원성(bulk resiliency)은 조금 감소하였다. 측정되어진 전분 완충재의 특성은 변형전분(hydroxypropylated starch)의 사용으로 향상되었다. 또한, glycerol, glycerol monostearate 그리고 alkylglucosides의 첨가도 전분 완충재의 밀도와 압축성을 증가시켰다. 염화철(II) 0.5%을 포함한 전분 완충재는 첨가제를 포함하지 않은 전분 완충재에 비하여 밀도 42%와 압축성 58%가 각각 감소한 반면, 복원성은 13%포인트 증가하였다. 변형전분과 염화철(II)이 첨가된 전분 완충재는 기존의 플라스틱 완충재에 비하여 밀도와 압축성은 떨어지지만, 대체 사용되어질 수 있는 것으로 판단되었다.

• Journal of Animal Environmental Science
• /
• v.5 no.2
• /
• pp.113-122
• /
• 1999

온실에서 퇴비화 발효율을 이용하기 위하여 발효율이 토양을 직접 가온하면서 퇴비화하는 퇴비화 하우스를 제작하였다. 퇴비화가 진행되는 동안 각 단계별 열의 발생량과 발생열량이 토양에 전달되는 특성을 분석하였다. 우분과 왕겨를 혼합하여 퇴비화 처리하였다. 퇴비화 과정의 총 70일 동안 391MJ/㎥의 열량이 발생하였으며, 이중 22일의 주발효기간 동안에 약 82%의 열량이 발생하였다. 또한 총 열량중 토양의 지표면의 지표면을 통하여 방출되는 열량을 제외한 260M/㎥의 열량이 지중가온에 이용된 것으로 나타났다. 콤포스트의 열 전도계수는 1.7~0.3W/m$^{\circ}$K이었다. 퇴비화 시스템을 구비한 온실의 주 발효기간의 지중 평균온도는 27.9$^{\circ}C$인 반면, 퇴비화 시스템이 없는 온실의 경우 13.9$^{\circ}C$로 나타나 퇴비화 시스템이 지중 온도증가에 큰 효과를 나타내고 있었다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.375-376
• /
• 2005

본 연구에서는 폐전선 피복플라스틱의 재활용을 위해 마찰하전형 정전선별법을 이용하여 PVC와 rubber의 재질분리 실험을 수행하였다. 하전물질의 종류에 따른 실험결과 PVC와 Rubber의 중간 일함수 값을 갖고 있는 PP 재질이 가장 효과적이었으며, 단일 시료보다PVC와 Rubber의 혼합조건에서 더 높은 하전 값을 나타내었다. 하전특성 실험결과 공기량은 10.28wt/s 이상 그리고 상대습도는 40% 이하의 조건에서 입자의 높은 하전량을 얻을 수 있음을 확인하였다. 분리특성 실험결과 전압세기가 25kv 이상 그리고 분리대의 위치는 전기장의 중앙(0)으로부터 Negative 전극으로 -lcm 이동한 지점으로, 이때 PVC의 품위와 회수율을 각각 99.5%와 95%인 결과를 얻었다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.112-117
• /
• 2016

This research compared the tensile performance of the vegetation mat, which was developed byu using the rapidly growing biodegradable plastic, Poly Lactic Acid(PLA), according to the biodegradation period. The test applied the method defined by Korean Standard KS. In the result of experiment using single-material PLA mesh and PLA plastic, the tensile strength and molecular weight were inverse-proportional to the 5 months of biodegradation period. The thickness of PLA mesh was increased by 11.2~13.4% while the tensile strenth of it was reduced by 32.4~55.4%. The tensile strength and molecular weight of PLA plastic were also reduced over time. However, the tension test of vegetation mat comprised of PLA mesh, non-woven fabric (including seeds), and jute net didn't have specific tendency.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.3
• /
• pp.55-61
• /
• 2018

This study evaluated if the selected samples meets the Solid Refuse Fuel quality criteria in Korea. Biomass and plastic wastes generated in D City were mixed in diverse ratio. When the biomass content was about 40%, the moisture content was close to the SRF criteria and was measured to be 9.8%. The ash contents were analyzed up to 4.19%, and the lower calorific values based on Steuer, Dulong Equation and Bomb Calorimeter were at least 4,851, 4,181 and 3,847 kcal/kg, respectively. As a result of the elemental analysis, sulfur and chloride content were measured up to 0.05%. Those values satisfied the SRF criteria. Also, heavy metals(Hg, Cd, Pb, As) were analyzed to be below the SRF criteria. This makes it possible to use efficiently the wood byproducts abandoned in the woods, and the physical properties of wood being weak to moisture can be supplemented with plastics. Consequently, if plastic and biomass were well mixed and made into SRF, it would overcome the problem of shortening the life span of incineration facilities due to the high temperature of plastic wastes in the incinerator.

• Clean Technology
• /
• v.23 no.2
• /
• pp.133-139
• /
• 2017

Bio-based plastics containing the biomass content higher than 25 wt% have been considered as environment-friendly materials due to their effects on the reduction in the $CO_2$ emission and petroleum consumption as well as biodegradability after use. In this study, poly vinyl chloride, plant-derived plasticizers, by adding a biodegradable catalyst was observed a change in the biodegradability and physical properties. To produce the oxidative decomposition transparent bio film, which is broken down in the initial percent elongation and physical properties such as tensile strength, it was to test the safety of the product as a food packaging material. Poly vinyl chloride, primary plasticizer, secondary plasticizer, anti fogging agent, the combined stabilizer were mixed in a high speed mixer, then extruded using an extrusion molding machine, after cooling, winding, to produce a oxidative decomposition transparent bio film and the control film, with a thickness of $12{\mu}m$ through winder role. Mechanical properties tensile strength, elongation, and the maximum load elongation and biodegradation test. Transparent bio film produced by biodegradation catalyst is compared with the control film. Tensile strength and elongation of films were found to be no significant difference. Further, as a result of the biodegradation test for 45 days based on the ASTM D6954-04 method, biodegrability of film is 61.4%.