• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.75-81
• /
• 2003

To investigate the reinforcing effect of subsurface layers of marine dredged clay(DMC) mixed with the micro-fiber(MF), a series of laboratory tests were performed on the DMC specimens with and without MF through uniaxial and triaxial compression tests. For the test programme, the elapsed time after dredging of marine clay, mixing rate and length of MF, and curing time of the composite were chosen as the important factors affecting the strength behaviour. The strength of the DMC mixed with MF and waste lime(WL) used for the admixture was found to be enhanced with the increasing content and length of MF, and with decreasing water content of DMC. MF and WL were applied as materials for trafficability improvement of the very soft reclaimed ground by DMC.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.23-29
• /
• 2003

In this paper, effects of the acidification of ground and the chemical additive materials-ferric oxide, calcium chloride and calcium sulphate on the compressibility characteristics of the marine clay treated with quick lime were investigated. The rapid inflection point method was carried out. Results showed that the compression index of the untreated marine clay increased as the pH of pore water decreased. Also, the preconsolidation pressure, the coefficient of consolidation and the coefficient of permeability of the untreated marine clay decreased with pH of pore water. In the case of the marine clay treated with the quick lime-calcium chloride, the compression index decreased and the coefficient of consolidation and the coefficient of permeability increased. Specially, the preconsolidation pressure of sample treated with the quick lime-ferric oxide was higher than that of another samples.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.164-169
• /
• 2003

화학공정에서 화재 및 폭발위험을 최소화, 즉 손실을 최소화하기 위해서는 공정의 안전과 최적화 조작이 이루어져야 한다. 공장을 건설하기 전에 안전성평가가 시행을 의무화하고 있다. 따라서 정확한 안전성평가를 위해서는 정확한 자료뿐만 아니라 더 많은 성분(순수물질 및 혼합물질)에 대한 자료의 필요성을 증대되고 있는 실정이다.(중략)

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.984-991
• /
• 2002

Oxidative stability and flavor of sesame oil blended with canola oil (Ca), corn oil (Co), and soybean oil (Sb) at ratios of 90 : 10, 70 : 30, and 50 : 50 (w/w), respectively, were evaluated. Oxidative stability of sesame oil increased with the addition of vegetable oils (10, 30, and 50% of Ca and Co, and 10% of Sb). Pyrazines, pyrroles, pyridines, and thiazoles, good contributors to the characteristic flavor of sesame oil, were also found in sesame oil blended with vegetable oil. The sensory evaluation showed that no difference was observed between sesame oil and sesame oil blended with 10% of Ca, Co or Sb, which showed higher oxidative stability.

• Korean Journal of Weed Science
• /
• v.17 no.1
• /
• pp.59-65
• /
• 1997

Bentazon 6-hydroxylase (B6H) and cinnamic acid 4-hydroxylase (CA4H) activities were determined in rice (Oryza sativa L.) microsomes to study methods of enhancing cytochrome P-450 mediated aryl hydroxylation of bentazon by hydoxylase inducing compounds. Pretreating rice seeds with 1,8-naphthalic anhydride at 0.5-2% and fenclorim at 5 and 10 ${\mu}M$ increased B6H and CA4H activities. Treatments of rice seedling with ethanol 2.5% enhanced B6H and CA4H activities, and with phenobarbital at 12 mM enhanced B6H activity, and CA4H activity was enhanced at 2 mM. B6H activity was synergistically enhanced by combined treatments of ethanol 2.5 or 5% and phenobarbital 8 or 12mM and also that of 1,8-naphthalic anhydride 0.5 or 1% and phenobarbital 8 or 12 mM, but CA4H activity was decreased by combined treatment. Five-day-old rice seedlings showed higher B6H and CA4H activities which decreased with seedling age.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.245-248
• /
• 2005

SCRamjet is the key technology for hypersonic flight over mach number 6. It is characterized by very short residence time in combustor because its internal flow is supersonic. In this short time, the whole process of combustion must be done. Especially numerical study of combustor is important because air-fuel mixing rate influences the performance of combustor. Various methods of air-fuel mixing enhancement are proposed. Among these, cavity injection method is selected to study in this paper. The numerical study is conducted with the variation of the cavity length at the fixed height of unit and jet injection on the downstream of cavity.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.702-704
• /
• 2011

For the representative of the poor performance of liquid fuel(Jet A-1), the physical properties effests of different additive ratios in the liquid fuel have been investigated. The mixed liquid fuel could be analyzed by principal factor of liquid fuel such as, density, viscosity and caloric value. This additives will be usefully applied to high energy density liquid fuel development.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.594-597
• /
• 2009

The mixing characteristics of pylon injection in a Scramjet combustor and effects of film cooling to protect pylon from air-heating. Three-dimensional Navier-Stokes equations with $k-{\omega}$ SST turbulence model were used. Fuel hydrogen and air were considered as coolants. There were remarkable improvements of penetration and mixing rate with the pylon injection. There also over-heating on the front surface of pylon without film cooling. The coolant injected parallel to the front surface of the pylon protect the pylon from over-heating.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.323-324
• /
• 2009

In this study aluminium sulfate, Ca(OH)$_2$, K-R Slag and Na$_2$SO$_4$ were used as active admixtures. The physical properties of active admixtures cement mortar were investigated by flow test and compressive strength. It was found that the resulting active admixtures exhibited the higher compressive strength than OPC mortar up. From the test results, cement mortars added active admixture have a good fundamental property.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.303-306
• /
• 2013

실제공간체감을 극대화하기 위해 실제 물리적인 공간과 가상현실 공간을 융합하는 인터랙티브 아키텍쳐 기반 적응형 혼합현실 기술이 최근 연구되고 있다. 이러한 혼합현실 공간에서 동적인 사용자 위치에 따라 물리공간적 몰입감 증대를 위한 오디오 Sweet Spot 최적화 기술을 연구하였다. 이를 위해 주파수 대역 별 소리의 물리적 감쇠현상을 활용하여 주파수 별 오디오 신호 보상 전처리를 통해 동적인 사용자 위치에 원음과 동일한 음색의 오디오 Sweet Spot이 형성이 가능한지 실험한 결과 주파수 별 감쇠의 차이를 보정함으로써 원음 그대로의 음색이 재현될 수 있다는 것을 확인할 수 있었다.