• Proceedings of the Korean Association for Survey Research Conference
• /
• 2005.12a
• /
• pp.47-54
• /
• 2005

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.21-29
• /
• 2005

Lightweight Foamed Soil (LWFS) could be the substitute of normal soils used in backfill to earth structures and embankment materials far soft ground improvement in port and harbor project because of its effectiveness in settlement reduction and earth pressure decrease due to its lightness. A series of triaxial and unconfined compression tests were performed to investigate behaviors of LWFS composed of dredged soils, cement and air foam, and cured at underwater conditions. The density of LWFS will increase if LWFS is cured at underwater conditions because high water pressure makes air foam disappear or demolish during the curing compared with LWFS cured at normal air conditions. This paper is to find the mechanical behaviors of LWFS cured at seawater depth of 5.0 m and 10.0 m, respectively, which simulates underwater curing conditions by underwater pressure simulator chamber developed during this study. In addition, new normalized factor formula, which takes account of mixing design conditions determining compressive strength of LWFS, was proposed to consider mixing design factor fur LWFS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.1
• /
• pp.58-65
• /
• 2007

Mixed mode interlaminar fracture behaviors of carbon fabric/epoxy composites were investigated through MMF (Mixed Mode Flexural) test by varying mixed mode ratio ranging from 20% to 90%. Mixed mode interlaminar fracture criteria based on NL point and 5% offset point were also suggested in order to predict mixed mode interlaminar fracture behaviors. Fracture surfaces and crack propagating behaviors were examined through a travelling scope and a scanning electron microscope. According to the results, mixed mode interlaminar fracture behaviors can be predicted by mixed mode interlaminar fracture criterion with m=1.5 and n=0.5 on the basis of NL point or mixed mode interlaminar fracture criterion with m=2 and n=3 on the basis of 5% offset point. Fracture surfaces and crack propagating behaviors are sensitive to mixed mode ratios. MMF test can be successfully applicable in evaluating mixed mode interlaminar fracture toughness of carbon fabric/epoxy composites.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.391-399
• /
• 2023

Recently, low-temperature pyrolysis technology has been studied as a recycling method for waste plastic. Low-temperature pyrolysis technology for waste plastic produces pyrolysis oil that can be used as an energy resource, but solid residue remains. Waste plastic pyrolysis residues are mostly landfilled due to their limited use. In this study, it is investigated that mixed waste plastic pyrolysis residues could be recycled into activated carbon. It was confirmed that the fixed carbon content of the residue was 33.69 % from proximate Analysis. Chemical activation was used to manufacture activated carbon. KOH was used as an activator. To investigate the effect of the mixing ratio of KOH and residue, samples were mixed at ratios of 0.5, 1.0, and 2.0. The mixed sample was chemically activated at an activation temperature of 800 ℃ for 1 hour. As a result of analyzing the characteristics of activated carbon through BET, it was confirmed that the specific surface area increased as the mixing ratio of KOH increased.

• Textile Coloration and Finishing
• /
• v.6 no.4
• /
• pp.9-16
• /
• 1994

알칼리 수용액 중에서의 Vinylsulfone(VS)계 반응성염료의 혼합상태의 가수분해 반응을 정량적으로 조사하였다. 혼합이량체의 생성 및 분해반응 속도상수를 각각의 염료의 가수분해반응에서 구한 속도상수를 이용하여 계산하였다. 단독이량체를 생성하는 염료들을 조합하였을 경우에는 혼합이량체가 생성되었다. C.I.Reactive Blue 19가 다른 VS계 염료들과 혼합되었을 경우에는 일반적으로 혼합이량체가 생성되었다. Blue 19와 Orange 16의 조합의 경우에는 낮은 염료농도에서만 혼합이량체가 생성되었으며, Red 22의 경우에는 단독 및 혼합이량체가 생성되지 않았다. 단독이량체가 생성되지않는 Orange 7는 다른 VS계 염료들과의 조합에서 혼합이량체를 생성함을 확인하였다. Yellow 17의 혼합이량체의 분해속도 상수값이 가장 큼을 알 수 있었다.

• Proceedings of the KSAR Conference
• /
• 2002.06a
• /
• pp.28-28
• /
• 2002

본 연구는 종부형태가 이유한 암돼지의 번식성적에 미치는 영향을 조사하기 위하여 이유후 4-6 일경에 자연발정이 발현되어 수정적기라고 판단되는 암돼지에 12시간 간격으로 각각 자연종부 2회, 인공수정 2회 및 혼합교배(자연종부 l회＋인공수정 1회)의 형태로 나누어 종부하고 분만율과 산자수를 조사하였다. 분만율은 자연종부 78.5%, 인공수정 76.3% 및 혼합교배 76.0%로 나타나 종부형태간에 유의적인 차이가 없었으나 총산자수는 자연교배 9.89 두와 인공수정 10.04 두의 단독 종부 형태 보다 혼합종부형태가 10.26두로 높게 나타났다(P<0.01). (중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.253-261
• /
• 2016

This study discusses the effective management of mixed-ages classes in kindergarten. For the study, 300 kindergarten teachers in charge of mixed classes for regular courses completed a self-reported questionnaire through a web survey. The data were analyzed by chi-square test and presented by frequency and percentage. Mixed-ages classes had relatively fewer children than one-age classes and they were prevalent in public kindergartens and rural areas. The results were as follows. First, mixed-ages classes were induced by the small number of young children. Second, teachers managed their classes with difficulty due to the lack of supporting staff and few chances for additional teaching training. Third, teachers needed supporting human resources for their teaching and administration assistances. About 23.0% of kindergartens received assistance such as additional training, financial assistance, and consulting supervision from related institutions. The study results suggested the challenges in regulations of age ratio in mixed-ages class, additional teaching training for teachers in mixed-ages classes and replacement of mixed-ages class to same age class as the long-term plan.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.193-200
• /
• 2013

BACKGROUND: Plant factory system of an artificial light type using Light-Emitting Diodes (LEDs), fluorescent light, or metal halide lamp instead of sun light is an ultimated method for plant production without any pesticides regardless of seasonal changes. The plant factory is also completely isolated from outside environmental conditions such as a light, temperature, or humidity compared to conventional greenhouse. Light-environment control such as a quality or quantity in the plant factory system is essential for improving the growth and development of plant species. However, there was little report that the effects of various light qualities provided by LEDs on Ledebouriella seseloides growth under the plant factory system. METHODS AND RESULTS: Ledebouriella seseloides seedlings transplanted at urethane sponge were grown in the plant factory system of a horizontal type with LED artificial lights for 90 days. Yamazaki solution for hydroponic culture of the seedlings was regularly irrigated by the deep flow technique (DFT) system on the culture gutters. Electrical Conductivity (EC) and pH of the solution was recorded at 1.4 ds/m and 5.8 in average, respectively during the experimental period. Number of unfolded leaves, leaf length, shoot fresh and dry weight of the seedlings were three times measured in every 30 days after beginning of the experiment. Blue LEDs, red LEDs, and fluorescent lights inside the plant factory were used as light sources. Conventional fluorescent lamps were considered as a control. In all the treatment, light intensity was maintained at $100{\mu}mol/m^2/s$ on the culture bed. Fresh weight of the seedlings was 3.7 times greater in the treatment with the mixture radiation of fluorescent light and blue+red LEDs (1:3 in energy ratio; Treatment FLBR13) than in fluorescent light treatment (Treatment FL). In FLBR13 treatment, dry weight per seedling was two times greater than in FL or BR11 treatment of blue+red LEDs (1:3 in energy ratio; Treatment BR11) during the culture period. Increasing in number of unfolded leaves was also significantly affected by the FLBR13 treatment comparing with BR11 treatment. CONCLUSION(S): Hydroponic culture of Ledebouriella seseloides seedlings was successfully achieved in the plant factory system with mixture lights of blue, red LEDs and fluorescent lights. Shoot growth of the seedlings was significantly promoted by the FLBR13 with the mixture radiation of fluorescent light, blue, and red LEDs under 1:3 mixture ratio of blue and red LEDs during the experimental period compared to conventional light conditions.

• The Korean Journal of Applied Statistics
• /
• v.21 no.1
• /
• pp.151-157
• /
• 2008

In generally, we use a method of the survey to forecast the economic demands and non-economic demands for a market trend. But we have a difficult problem to estimate the demand for the marketplace objectively because the survey with the non-response and the inadequate understanding on questionnaires did not provided the strong and uniform forecast. Here, we proposed a method compounded of survey and a statistical model to estimate the demand for the marketplace and discussed the mixture model applied to the service demand on an agency.

• Journal of Applied Biological Chemistry
• /
• v.58 no.2
• /
• pp.131-137
• /
• 2015

Commercial greenhouse plant factories are highly efficient for controlling external factors such as floods, drought, insects, air pollution etc. However, they require substantial startup & maintenance investments and experimental research to optimize production. These facilities are especially useful for urban farming where high efficiency in small spaces is required. In this study, we investigated whether light emitting diode (LED) lights with mixed dominant wavelengths (650 nm : 550 nm : 445 nm=8:1:1, 650 nm : 445 nm=6:4) can increase the growth rate and bio-active compound content of carrots in comparison to that of fluorescent light (FL). LED with mixed wavelength (650 nm : 550 nm : 445 nm=8:1:1) increased the total weight and root circumference of carrots compared to FL. However, ${\beta}$-carotene contents were not significant in LED (650 nm : 550 nm : 445 nm=8:1:1). However, LED (650 nm : 445 nm=6:4) increased the ${\beta}$-carotene (FL: 7.27, LED: 10.48 mg/g ${\beta}$-carotene dried weight). These results suggested that using LED light at the ideal wavelength, at the antithesis color of the plant, might enhance plant growth and bio-active compound contents.