• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.486-492
• /
• 2009

Wet oxidations (WO) of quinoline in aqueous solution were carried out at $225^{\circ}C$ and $250^{\circ}C$. In the WO at $250^{\circ}C$, quinoline was degraded completely within 30 min and the reduction in total organic carbon (TOC) of 63% was achieved during 120 min. However, the rate of the reduction in TOC was only 13% within 240 min during the WO at $225^{\circ}C$. Nicotinic and acetic acid were found to be main intermediates formed during the oxidation of quinoline. With the addition of the homogeneous catalyst $CuSO_4$ or more easily oxidizable phenol, WOs of quinoline were also carried out under moderate conditions at $200^{\circ}C$. The catalytic WO with $CuSO_4$ of 0.20 g/L showed the destruction rates of quinoline and TOC comparable to those in the WO at $250^{\circ}C$. The WOs of quinoline-phenol mixture exhibited induction periods to degrade quinoline and phenol during which free radicals were produced to initiate WOs. With increasing initial concentrations of phenol at a given initial concentration of quinoline, the induction periods in the destructions of quinoline and phenol became shorter and the reduction in TOC increased from 60% to 75% during 180 min of the WOs. The reduction rate of an induction period decreased as increasing the initial concentration ratio of phenol to quinoline. On the other hand, phenol degradation in the WOs of quinoline-phenol mixtures required a longer induction period and proceeded slower compared to the case of the WO of phenol.

• Korean Journal of Food Science and Technology
• /
• v.13 no.2
• /
• pp.153-159
• /
• 1981

A study was carried out to determine the optimal sterilization conditions of cooked rice packed in retort pouch and processed in a steam-air system retort. The cooked rice packed in retort pouch in various thickness (15, 20 and 25 mm) was processed at various heating temperature (110, 115 and $120^{\circ}C$) with $F_0$-value 6.0. In order to evaluate quality change during the thermal prosessing, C-values, based on z-value $33^{\circ}C$ and $F_0$ value 6.0, were also calculated at surface, center and mass average temperatures. Subsequent storage study revealed that the cooked rice packed in 15 mm thickness and processed at $120^{\circ}C$ with$F_0$-value 6.0 could be held without any spoilage and color change, when stored for 6 months at $38{\pm}1^{\circ}C$ under saturation humidity.

• Korean Journal of Weed Science
• /
• v.14 no.1
• /
• pp.28-33
• /
• 1994

This study was conducted to investigate the efficacy of weed control by pyributicarb{O-[3-tert-butylphenyl] N-[6-methoxy-2-pyridyl]-N-methyl thiocarbamate}/bensulfuron-methyl{methyl 2-[[[[[[4, 6-dimethoxypyrimidin-2-yl] amino] carbonyl] amino] sulfonyl] methyl] benzoate} SC and oxadiazon{5-tert-butyl-3-[2,4-dichloro-5-isopropoxyphenyl]-1,3,4-oxadiazol-2(3)-one}/bensulfuron-methyl SC, and to develope weed control methods for paddy rice. There was little difference between suspension concentrate and granule of pyributicarb/bensulfuron-methyl and oxadiazon/bensulfuron-methyl combination in the effect of weed control. Pyributicarb/bensulfuron-methyl SC and oxadiazon/bensulfuron-methyl SC were diffused from the point of application to 6m. Pyributicarb/bensulfuron-methyl SC applied on water surface from irrigation inlet and in paddy water from dike controlled more than 90% of weeds. Pyributicarb/bensulfuron-methyl SC was precipitated about 1-2cm per 1 hour after dripping on water surface. The efficacy of weed control by pyributicarb/bensulfuron-methyl SC was higher in 0-1cm than in 6-7cm standing water depth.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.4
• /
• pp.12-18
• /
• 1984

Soaking treated in 20% aqueous solutions of $(NH_4)_2SO_4$, $NH_4H_2PO_4$, $(NH_4)_2HPO_4$, $Na_2B_4O_7-H_3BO_3$(60:40) and Minalith, the mixed salts for 9 hrs. the wet 3.5mm meranti (Parashorea spp.) plywoods were press-dried at 90, 120 and $150^{\circ}C$ and put to static bending test to examine the influence of redrying temperature on the strength of fire-retardant treated plywoods ill flexure. While water-soaking treatment (control) showed serious reduction in Stress at proportional limit, MOE, MOR, Work per unit volume at $150^{\circ}C$, all the fire-retardant treatments maintained bending strength even at $150^{\circ}C$ and showed rather increased values in case of some chemicals. In view of drying rate and maintenance of strength, the most pertinent platen temperature was $150^{\circ}C$ and Borax-Boric acid was the predominant fire-retardant in this study.

• Journal of the Korean Vacuum Society
• /
• v.19 no.5
• /
• pp.377-384
• /
• 2010

Many routes have been developed for the synthesis of signle-walled carbon nanotubes (SWCNTs). We spun fibers of SWCNTs directly from vertical furnace using a liquid source of carbon and an iron-contained molecule. The solution was prepared by ethanol as a carbon source, in which ferrocene as a catalyst, thiophene were dissolved. It was then injected from the top of the furnace into hot zone with hydrogen as a carrier gas. We successfully synthesized high-quality SWCNTs by adjusting the various experimental conditions, such as concentration of ferrocene, solution injection rate, concentration of thiophene, and hydrogen flow rate. Measurement of Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy were carried out to find the optimized conditions. The synthesized SWCNTs (1.16~1.64 nm) appeared a bundle structure and well-aligned parallel to the direction of furnace. These results also provide an simple way for high-quality SWCNTs mass production and fabricating direct spining SWCNTs fiber. It will allow one-step production of SWCNTs fiber with potentially excellent properties and wide-range applications.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.31-37
• /
• 2013

Lowering surface reflectance of Si wafers by texturization is one of the most important processes for improving the efficiency of Si solar cells. This paper presents the results on the effect of texturing using acidic solution mixtures containing the catalytic agents to moderate etching rates on the surface morphology of mc-Si wafer as well as on the performance parameters of solar cell. It was found that the treatment of contaminated crystalline silicon wafer with $HNO_3-H_2O_2-H_2O$ solution before the texturing helps the removal of organic contaminants due to its oxidizing properties and thereby allows the formation of nucleation centers for texturing. This treatment combined with the use of a catalytic agent such as phosphoric acid improved the effects of the texturing effects. This reduced the reflectance of the surface, thereby increased the short circuit current and the conversion efficiency of the solar cell. Employing this technique, we were able to fabricate mc-Si solar cell of 16.4% conversion efficiency with anti-reflective (AR) coating of silicon nitride film using plasma-enhanced chemical vapor deposition (PECVD) and Si wafers can be texturized in a short time.

• Journal of Life Science
• /
• v.15 no.3 s.70
• /
• pp.468-473
• /
• 2005

The coastal regions of Yeosu, the South Sea of Korea, has occurred annually the red tide which is caused by potentially ichthyotoxic dinoflagellate C. polykrikoides, with a wide avenue for exchange with oceanic waters and freshwater runoff from Sumjin river. We attempted to examine the variability in response to vertical migration and concentration of extracted DNA/RNA of C. polykrikoides exposed to salinity-stratified waters. The experimental aquarium of the 60 liter was employed to culture C. polykrikoides. One aquarium was supplied with only sea water, the other was consisted of sea water and freshwater. Experiment was conducted for 5 days. In experimental column (mixture of freshwater and sea water), salinity was maintained to 20 at upper and approximately 30 at bottom during the period of this study. The fluctuation with related to dissolved oxygen and pH was similar pattern to both columns. Chlorophyll a was significantly higher value at upper than bottom. During 24h, chlorphyll a on experimental column was extremely high on the top as soon as lighting, compared with control. With elapsed time, the gap between experimental and control columns was a little. In darkness, chlorophyll a was not significantly different between upper and bottom, most cells appeared to randomly distribute on column regardless of water layer. Fluctuation with related to concentration of extracted DNA and RNA based on ratio of absorbance of 260 and 280 nm in experimental column was higher at final day or diel migration than control. These results implied that a large volume of freshwater could be associated with influence of concentration of DNA and RNA, in particular, rapid upward movement caused massive fish kills as soon as sunset.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.39-44
• /
• 2010

The process of the preparation of branched-chain amino acid (BCAA)-enriched hydrolysates from corn gluten was optimized through the parameters of pre-treatment (heating and cellulosic hydrolysis), hydrolysis method (acid, protease, and microbe plus protease), concentration, and spray drying condition. The protein yield of corn gluten was increased by heating and cellulase treatments. Among three different hydrolysis methods, the combined use of microbes and protease was the most effective in terms of free amino acid (FAA) and BCAA content of the corn gluten hydrolysates. In addition, the FAA and BCAA content in the hydrolysates prepared by microbial and enzymatic combined treatment were improved by a concentration process. Spray drying conditions for the preparation of the powder from the hydrolyzed reactant were an inlet temperature of $185^{\circ}C$, outlet temperature of $80^{\circ}C$, and the use of maltodextrin as an anticaking agent. Thus, this study established an economical process for preparation of value-added hydrolysates of excellent productivity and quality, in terms of high BCAA content and product stability.

• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.186-190
• /
• 2009

Four different mixing ratios of Rose rugosa Thun and Vitis amurensis (Moru) were prepared. These included Rose rugosa Thun two vs. Moru one (Moru 33), Rose rugosa Thun one vs. Moru two (Moru 67), Rose rugosa Thun one vs. Moru five (Moru 83), and Moru (Moru 100). Their physiochemical changes were investigated during 28 days of fermentation followed by aging. The final brix, pH, and total titratable acidity values of the four experiments were in the following ranges: 6.0-8.2$^{\circ}$Bx, 3.87-4.03, and 0.94-1.18%, respectively. Final ethanol contents were 6.5% in Moru 33, 11.8% in Moru 67, 11.1% in Moru 83, and 11.4% in Moru 100. As the amount of Rose rugosa Thun increased, anthocyanin content, color intensity, organic acid, and free amino acid concentrations were reduced. These findings demonstrate that the supplementation of Rose rugosa Thun to Moru prior to alcohol fermentation may help change the acidity, colour, and taste in the final product.

• Journal of KIISE:Software and Applications
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2007

This paper proposes a new indexing mechanism for MPEG-7 visual descriptors, especially Dominant Color and Contour Shape descriptors, that guarantees an efficient similarity search for the multimedia database whose visual meta-data are represented with MPEG-7. Since the similarity metric used in the Dominant Color descriptor is based on Gaussian mixture model, the descriptor itself could be transform into a color histogram in which the distribution of the color values follows the Gauss distribution. Then, the transformed Dominant Color descriptor (i.e., the color histogram) is indexed in the proposed indexing mechanism. For the indexing of Contour Shape descriptor, we have used a two-pass algorithm. That is, in the first pass, since the similarity of two shapes could be roughly measured with the global parameters such as eccentricity and circularity used in Contour shape descriptor, the dissimilar image objects could be excluded with these global parameters first. Then, the similarities between the query and remaining image objects are measured with the peak parameters of Contour Shape descriptor. This two-pass approach helps to reduce the computational resources to measure the similarity of image objects using Contour Shape descriptor. This paper also proposes two integration schemes of visual descriptors for an efficient retrieval of multimedia database. The one is to use the weight of descriptor as a yardstick to determine the number of selected similar image objects with respect to that descriptor, and the other is to use the weight as the degree of importance of the descriptor in the global similarity measurement. Experimental results show that the proposed indexing and integration schemes produce a remarkable speed-up comparing to the exact similarity search, although there are some losses in the accuracy because of the approximated computation in indexing. The proposed schemes could be used to build a multimedia database represented in MPEG-7 that guarantees an efficient retrieval.