• The Transactions of the Korea Information Processing Society
• /
• v.3 no.1
• /
• pp.118-126
• /
• 1996

Memory hierarchy is a useful mechanism for improving the memory access speed and making the program space larger by layering the memories and separating program spaces from memory spaces. However, it needs at least two memory accesses for each data reference : a TLB(Translation Lookaside Buffer) access for the address translation and a data cache access for the desired data. If the cache size increases to the multiplication of page size and the cache associativity, it is difficult to access the TLB with the cache in parallel, thereby making longer the critical timing path in the processor. To achieve such parallel accesses, we present the hybrid mapped TLB which combines a direct mapped TLB with a very small fully-associative mapped TLB. The former can reduce the TLB access time. while the latter removes the conflict misses from the former. The trace-driven simulation shows that under given workloads the proposed TLB is effective even when a fully-associative mapped TLB with only four entries is added because the effects of its increased misses are offset by its speed benefits.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.146.1-146.1
• /
• 2011

석탄가스화복합발전(IGCC)공정에서 가스화기를 거쳐 생성된 합성가스로부터 $CO_2$를 효과적으로 분리/회수하기 위해 가스 고형화법을 제안하였다. 가스 하이드레이트 형성과정에서의 반응특성을 살펴보기 위하여 반응시간에 따른 가스소모량과 기상의 $CO_2$ 조성 변화를 측정하였다. 순수계와 촉진제 첨가계 (TBAB (10, 40 wt%), TBAF (10, 34 wt%), THF (4, 19 wt%))에 대하여 하이드레이트 생성 후의 기상과 하이드레이트상의 $CO_2$ 조성을 측정하였으며, 그 결과 하이드레이트 형성법에 의해 고농도의 $CO_2$가 하이드레이트상에 포집되는 것을 확인하였다. 가스 소모량 측정실험에서는 THF 19.1 wt%를 첨가하였을 때 가장 큰 소모량을 보였으며, TBAF 10 wt%를 첨가하였을 때 가장 적은 가스소모량을 보였다. $CO_2$ 조성 변화 실험에서는 가스 소모량 실험과 마찬가지로 THF 19.1 wt%를 첨가하였을 때 가장 큰 조성변화를 보였다. 이는 THF의 첨가로 인하여 가스 하이드레이트로의 전환율 증가로 많은 양의 $CO_2$ 기체가 하이드레이트 상에 포집되었음을 나타낸다. 속도론적인 측면에서는 모든 실험조건에서 하이드레이트 형성반응이 1시간 이내에 대부분 종결되는 것을 볼 수 있었다. 또한 $^1H$-NMR을 통하여 혼합가스 하이드레이트의 구조적인 분석을 진행하였다. 본 실험에서 얻어진 결과는 가스 하이드레이트 형성법을 이용한 합성가스 분리 공정 개발에 중요한 기초자료가 될 것으로 사료된다.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.1 s.38
• /
• pp.33-42
• /
• 1999

In the present study, crack initiation criteria, static failure and tensile mode fatigue behavior for a rail steel are evaluated to assure the railway vehicle's safety. The transverse fissure, which is the most critical damage in the rail, is initiated by the maximum shear stress and its location is subsurface. In addition, the possibility of transition from the shear mode to the mixed mode increases with increasing the length of subsurface crack. Because of the brittleness by the welding, the fracture toughness of the welded part is lower than of the base metal. For low ${\Delta}K$, the stage II fatigue crack growth rates of the welded part is slower than of the base metal but, for high ${\Delta}K$, this different behavior for fatigue crack growth rate is nearly diminished. These trends are more remarkable for low stress ratio, R=0.1. It is believed that this behavior is caused by the change of the microstructure which that of the welded part is coarser than of base metal.

• Explosives and Blasting
• /
• v.30 no.1
• /
• pp.9-16
• /
• 2012

With the deterioration and functional loss of structures, there is an increasing demand for demolition and various demolition technologies have been developed. In case of a large-scale concrete foundation, application of some mechanical demolition techniques is limited because of the structural characteristics, and explosive demolition or explosive demolition combined with mechanical demolition is applied recently due to the effect to the surrounding environment by the ground vibration. In this study, we compared peak particle velocity of ground vibration depending on average fragment size in case of explosive demolition design for large-scale concrete foundation using the relation among specific charge, charge constant and transmitting medium constant as well as the relation between average concrete fragment size and specific charge.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.8
• /
• pp.33-40
• /
• 2009

This paper presents the high performance control of interior permanent magnet synchronous motor(IPMSM) using space vector(SV) PWM method based on hybrid artificial intelligent(HAI) controller. The HAI controller combines the advantages between adaptive fuzzy control and neural network The SV PWM method is applied to a speed control system of motor in the industry field until now and is feasible to improve harmonic rate of output current, switching frequency and response characteristics. This HAI controller is used instead of conventional PI controller in order to solve problems happening when calculating a reference voltage. The HAI controller improves speed performance by hybrid combination of reference model-based adaptive mechanism method, fuzzy control and neural network. This paper analyzes response characteristics of parameter variation, steady-state and transient-state using proposed HAI controller and this controller compares with conventional fuzzy neural network(FNN) and PI controller. Also, this paper proves validity of HAI controller.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.135-140
• /
• 2006

In the experimental study of $N_2$ purge cold flow test of impinging(FOOF) injector for determining of instability region, the whistling sound which has a specific frequency is generated. The frequency of whistling is proportional to the gas flow velocity in part of the oxidizer orifice and due to the coupling of the vibrating gas column and the natural frequency of pipe-orifice shape, the discontinuous jumping phenomena arises. The whistling phenomena have no effect on the combustion instability. Compared the damping factor of 1T1L mode with the hot fire test, the instability region of $N_2$ purge cold flow test is very much like that. It means that flow instability by impinging or mixing of jet is the main reason of combustion instability of impinging injector(FOOF) in the hot firing test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.4
• /
• pp.26-33
• /
• 2006

The use of high-density propellants can provide performance advantages in space launch vehicles by allowing an improved structural ratio due to smaller propellants tanks. The Jet A-1 fuel is currently used in Korean space launch vehicle development and it has lower density than other advanced hydrocarbon fuels such as RP-1 or RG-1. In this paper, the results of hydraulic and combustion tests conducted for the two newly developed densified hydrocarbon fuels are presented and they are compared with the results of Jet A-1. Conclusively, the two densified hydrocarbon fuels presented equivalent or even higher combustion performance compared to the Jet A-1 and the performance difference was found to be more obvious in the injector of external mixing.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.277-282
• /
• 2006

The purpose in having a control surface on a ship is to control the motion of the ship. The control surface may be composed entirely of a single movable surface or of a combination of fixed and movable portion A control surface has one sole function to perform in meeting its purpose, and that is to develop a control force in consequence of its orientation and movement relative to the water. The forces and moments generated as a result of this rotation and angle of attack then determine the maneuvering characteristics of the ship. In this paper the study of flapped rudder's 2-dimensional section was accomplished. Model tests had been carried out with different angles of attack of a main foil and flap's deflection angles to predict the performance of the flapped rudder and the 2 frame particle tracking method had been used to obtain the velocity distribution in the flow field $Re=2.8\times10^4$ had been used during the whole experiments and measured results had been compared with each other.

• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.421-433
• /
• 2006

This paper proposes a method to insert virtual objects into a real video stream based on feature tracking and camera pose estimation from a set of single-camera video frames. To insert or modify 3D shapes to target video frames, the transformation from the 3D objects to the projection of the objects onto the video frames should be revealed. It is shown that, without a camera calibration process, the 3D reconstruction is possible using multiple images from a single camera under the fixed internal camera parameters. The proposed approach is based on the simplification of the camera matrix of intrinsic parameters and the use of projective geometry. The method is particularly useful for augmented reality applications to insert or modify models to a real video stream. The proposed method is based on a linear parameter estimation approach for the auto-calibration step and it enhances the stability and reduces the execution time. Several experimental results are presented on real-world video streams, demonstrating the usefulness of our method for the augmented reality applications.

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.16-25
• /
• 2009

In the car environment that the first priority is a safety problem, the large vocabulary isolated word recognition system with POI domain is required as the optimal HMI technique. For the telematics terminal with a highly limited processing time and memory capacity, it is impossible to process more than 100,000 words in the terminal by the general speech recognition methods. Therefore, we proposed phoneme recognizer using the phonetic GMM and also PDM Levenshtein distance with multi-layer architecture for the POI recognition of telematics terminal. By the proposed methods, we obtained high performance in the telematics terminal with low speed processing and small memory capacity. we obtained the recognition rate of maximum 94.8% in indoor environment and of maximum 92.4% in the car navigation environments.