• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.534-547
• /
• 2006

Ectopic eruption and impaction of canines is a frequently encountered clinical problems. The incidence of impaction ranges between 1-3%. The cause of canine impaction can be the result of localized factors or can be a polygenic multifactorial inheritance and associated with other dental anomalies. The general dentist and pediatric dentist should know how to properly diagnose and manage potential disturbances in the eruption of maxillary canine. Diagnosis of impacted canine at age 8-10 years can significantly reduce serious ramifications, including surgical exposure and orthodontic traction as well as root resorption of the lateral incisors. Extraction of primary canine would be one of the method to prevent the impaction. The surgical procedure should be designed to minimize the destruction of periodontal tissue of impacted canine. Closed eruption technique is thought to be optimal method of surgical exposure compared with other methods. An overview of the incidence, sequela as well as the surgical periodontal, and orthodontic consideration in the management of impacted canine was presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.108-116
• /
• 2009

In this paper, we propose a Ethernet based audio distribution system with a new L1/L2 hybrid switching scheme, and evaluate its performance. The proposed scheme not only offers guaranteed low latency and jitter characteristics that are essentially required for the distribution of high-quality uncompressed audio traffic, and but also provide an efficient transmission of data traffic on the Ethernet environment. The audio distribution system with a proposed scheme consists of a master node and a number of relay nodes, and all nodes are mutually connected as a daisy-chain topology through up and downlinks. The master node generates an audio frame for each cycle of 125us, and the audio frame has 24 time slotted audio channels for carrying stereo 24 channels of 16-bit PCM sampled audio. On receiving the audio frame from its upstream node via the downlink, each intermediate node inserts its audio traffic to the reserved time slot for itself, then relays again to next node through its physical layer(L1) transmission - repeating. After reaching the end node, the audio frame is loopbacked through the uplink. On repeating through the uplink, each node makes a copy of audio slot that node has to receive, then play the audio. When the audio transmission is completed, each node works as a normal L2 switch, thus data frames are switched during the remaining period. For supporting this L1/L2 hybrid switching capability, we insert a glue logic for parsing and multiplexing audio and data frames at MII(Media Independent Interlace) between the physical and data link layers. The proposed scheme can provide a good delay performance and transmission efficiency than legacy Ethernet based audio distribution systems. For verifying the feasibility of the proposed L1/L2 hybrid switching scheme, we use OMNeT++ as a simulation tool with various parameters. From the simulation results, one can find that the proposed scheme can provides outstanding characteristics in terms of both jitter characteristic for audio traffic and transmission efficiency of data traffics.

• The Korean Journal of Malacology
• /
• v.27 no.2
• /
• pp.115-119
• /
• 2011

To establish technical development for artificial seed production, growth and survival for early young spats of the hard clam, Meretrix petechialis, were investigated by breeding methods. Adult clams were collected at Hasa-ri, Baeksu-eup, Yeonggwang-gun, Jeollanam-do on July 13, 2010, and then transported to the indoor aquarium at the laboratory. Eggs which were taken from mother clams, were inseminated, and after they were fertilized in the aquarium, 60 million bottom-clinging spats ($198{\pm}12{\mu}m$ in shell length) were produced and bred. The breeding experiments were carried out from July 16 to October 4, 2010 for 80 days. The methods of sand box, sand bottom circulation filter, inclosing net, floor were used for the breeding experiments, and the experimental condition of sea water temperature for larvae were at 25, 28, 31, $34^{\circ}C$. Four marine cultured food organisms were used for this study as follows: Isochrysis galbana, Chaetoceros gracilis, Phaeodactylum tricornutum, Tetraselmis tetrathele. According to the experimental conditions, experimental groups of the spats in the early stage were investigated the growth rate and the survival. As the result, the method of the inclosing net section was the fastest (grew up to $2.64{\pm}0.59{\mu}m$ in shell length), followed by sandbox ($2.59{\pm}0.64{\mu}m$, bottom circulating filter ($2.56{\pm}0.52{\mu}m$), and floor ($2.52{\pm}0.56{\mu}m$). The survival was the highest in the experimental condition of sandbox (35.9%), followed by floor (34.6%), bottom circulating filter (29.5%), and inclosing net (9.3%). Eexperimental condition of water temperature of $34^{\circ}C$ showed the fastest growth rate (grew up to $2.70{\pm}0.76{\mu}m$ in shell length), and showed the latest growth rate (grew up to $2.45{\pm}0.41{\mu}m$ in shell length) at $25^{\circ}C$. The survival (%) was the highest under the water temperature conditions at $31^{\circ}C$, and showed the lowest (14.2%) at $34.^{\circ}C$. The growth rate of the experimental group fed the mixture live food was the fastest with shell length $2.52{\pm}0.66{\mu}m$, and that of experimental group fed P. tricornutum showed the latest (grew up to $2.29{\pm}0.43{\mu}m$ in shell length). The survival was the highest (36.9%) under the experiment condition fed mixture live food and experimental group fed T. tetrathele showed the lowest rate (16.2%).

• Magazine of the Korea Concrete Institute
• /
• v.7 no.6
• /
• pp.233-241
• /
• 1995

In this thesis, the fatigue tests were performed on a series of R /C beams repaired with co& crete-lmlyrner composites to investigate the fatigue bahavior. The three point loading system is used in the fatigue tests. In these tests, relations between the repeated loading cycles and mid-span deflections, number of repeated loading cycles when repaired beams were fractured, the bonding performance of repair materials were observed. On this basis, the mid-span deflections, the crack growth and failure mode of repaired R /C beams were studied. A S-N curve was drawn to present the fatigue strength of repaired beams. From the test results, it was shown that behavior of R /C beams repaired with polymer-cement series were very sirnillar to control beam about bonding performance, mid-span deflections and fatigue strength according to S-N curve drawn by the regression anlysis on the fatigue test results.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.2
• /
• pp.91-97
• /
• 2013

Solid polymer electrolyte films are prepared by ultraviolet radiation in the mixtures of an ionic liquid salt (1-ethyl-3-methylimidazolium tetrafluoroborate, $EMIBF_4$) and solvent (acetonitrile (ACN) or propylene carbonate(PC)), and an oligomer (poly(ethylene glycol)diacrylate, PEGDA, 45-60 wt.%). Electrochemical properties of activated carbon supercapacitors adopting the solid polymer electrolyte films as a separator are also examined by cyclic voltammetry and impedance measurement techniques. As a result, the supercapacitor adopting the PEGDA as much as 45 wt.% exhibits a superior capacitance of $46Fg^{-1}$ at $20mVs^{-1}$. It seems that this is due to fast kinetics of ion conduction by sufficient film flexibility, which can be allowed by comparatively weak ultraviolet curing of small anount of the PEGDA.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.192-199
• /
• 1991

To manufacture a good organic fertilizer through rapid composting process, cow dung was mixed with bulking materials such as rice straws, shredded bark, wood chips, and saw dust. The mixing ratio of the cow dung and bulking material was two to one on volume basis and moisture content was adjusted to 60 to 70 percent, C/N ratio 25 to 30 and aeration forced with suction during the aerated pile fermentation. Aerated pile was established outdoors and curing pile was in vinylhouse and the experiment was conducted for 3 years from '88 to '90. After pilling, temperature in aerated pile was reached to the maximum level at 7 to 9 days and the temperatures of cow dung + shredded bark, cow dung + wood chips, and cow dung + rice straws were higher than that of cow dung, and cow dung + saw dust. Total carbon, and C/N ratio in aerated pile fermentation period were increased in the middle stage and then they were decreased with the process of days, and nutrient contents in curing pile period had the same tendency as in the aerated pile.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.59-70
• /
• 2016

Packaging is thought to contribute to the consumers' purchasing choice of the powdered infant formula products. In Asian market, the products of international and local brands are competing. Evaluation and analysis of food package functions for a variety of brand products will be helpful for the innovative packaging development. Thus, the packaged products of powdered infant formula were collected in Chinese, Indonesian and Korean supermarkets as a typical Asian market and examined in terms of main food packaging functions. Metal cans were the most dominant type of big size package (800-1000 g) while flexible bags were often the common one of medium size (400 g). In general, convenience function was provided in forms of easy opening device and portioning take-out spoon. Information on primary and secondary shelf lives was given besides nutritional facts and use instruction for communication function. The combination of $N_2$ and $CO_2$ was usually employed to protect powdered infant formula in rigid packages, whereas only $N_2$ was used to protect product in most flexible packages.

• Membrane Journal
• /
• v.17 no.3
• /
• pp.269-275
• /
• 2007

Sodium type faujasite(FAU) zeolite membranes with a thickness of 5${\mu}m$ and a Si/Al molar ratio of 1.5 were prepared by the secondary growth process. The $CO_2/N_2$ separation in the vacuum mode was investigated at $30^{\circ}C$ for an equimolar $CO_2-N_2$ mixed gas before and after embedding 13X zeolite beads in the permeate side. The embedded 13X zeolite beads improved both $CO_2$ permeance and $CO_2/N_2$ separation factor, simultaneously. The phenomenon was explained by an increment in the $CO_2$ desorption rate at the FAU zeolite/$\alpha-Al_2O_3$ phase boundary due to an enhanced $CO_2$ escaping through the pore channels of the $\alpha-Al_2O_3$ support layer. In the present paper, it will be emphasized that a hybridization of a membrane with an adsorbent can provide a key to break through the trade-off between permeance and separation factor, generally shown in a membrane separation.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.293-301
• /
• 2013

This study discusses the feasibility of coffee bean residue as a raw material of medium-density fiberboard (MDF). In this relation, the effect of coffee bean residue known as an absorbent material on the physical and mechanical properties of MDF manufactured at its different addition level. Coffee bean residue which is a by-product of coffee mill and large amount of waste left over after processing for instant coffee was added at the level of 3, 6, and 9% on dry basis and urea formaldehyde resin was used as the adhesive. The MDF made with mixture of wood fiber and coffee bean residue was tested for physical and mechanical properties as well as formaldehyde emission. The bending strength and internal bonding strength of the MDF made with mixture of wood fiber-coffee bean residue were higher than that of the KS standard in randomized mat structure type, but not in layered mat structure type. Also, the physical properties of MDF made with mixture of wood fiber-coffee bean residue showed a considerable improvement in thickness swelling over the commercial MDF. More importantly, the formaldehyde emission rate of MDF made with mixture of wood fiber-coffee bean residue met the KS standard and was close to that of commercial MDF. These results showed the feasibility of coffee bean residue as a raw material for the production of environmentally-friendly MDF. Additional works on adhesive-coffee bean compatibility, improvement of moisture absorption effect and reduction the formaldehyde emission rate by carbonization of coffee bean residue may be required.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.4
• /
• pp.11-20
• /
• 2014

Recently, manure emissions associated with the numerical increment of the domestic hog-breeding have increased, but it has been banned from ocean dumping by the United Nations Convention in 2012. To find out the site for spraying in large quantity of liquid manure fertilizer, we selected one grass plantation, which has the largest amount of grass production, in Jangsung, South Korea. We spread not only chemical fertilizer but also liquid manure fertilizer on the zoysiagrass plantation and researched the effect on the grass growth and development, soil chemical property, and seepage water of dike. As the test results, spread by compounding chemical fertilizer and liquid manure fertilizer and it is possible to substitute for some chemical fertilizer in terms of nutrients accumulation and the grass growth and development. Additionally, it gives less effects to soil chemical property and is efficacious to effective microorganism growth of soil. Therefore, adding liquid manure fertilizer will lead to reduce almost all the amount of chemical fertilizer usage. It is also expected to help for livestock manure management and to influence reducing the production cost of the grass plantation. However, to spread liquid manure fertilizer contaminates water system. For this reason, monitoring continuously, we need to find out improvement plans of the fertilization method in order to increase the usage of liquid manure fertilizer.