• Title/Summary/Keyword: 혼합계산

Search Result 1,114, Processing Time 0.027 seconds

A Study for the Manufacture of Starch Based Intermediate Moisture Food (전분질(澱粉質) 중간수분식품(中間水分食品)의 제조(製造)를 위(爲)한 기초연구(基礎硏究))

  • Hwang, In-Young;Park, Kwan-Hwa
    • Korean Journal of Food Science and Technology
    • /
    • v.13 no.3
    • /
    • pp.227-232
    • /
    • 1981
  • To obtain several basic data which can be applied to preparations of intermediate moisture food (IMF) with cooked rice, various model IMF were prepared by infusing humectants such as glycerol, sorbitol. sodium chloride and sucrose into freeze-dried cooked rice and resulting water activities were measured by vacuum pressure manometer, Characteristics and composition of various humectants were studied on the basis of greatest lowering of water activities at the same w/w% concentration. Glycerol and sorbitol were more efficient in lowering water activity than other humectants. Mixture of humectants, however, were more effective than single solutes at the same concentration for lowering water activity. The measured values of water activity were compared to the predicted values by several known equations. Of those, the Ross equation was the most accurate means of predicting the water activity of the model IMF containing glycerol, and the Norrish equation, of the model IMF containing sorbitol, respectively.

  • PDF

X-Band FMCW RADAR Signal Processing for small ship (소형선박용 X-Band FMCW 레이더 신호처리부 설계 및 구현)

  • Kim, Jeong-Yeon;Chong, Kil-To;Kim, Tae-Yeong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.10 no.11
    • /
    • pp.3121-3129
    • /
    • 2009
  • Conventional marine radar systems utilize pulse radar which is capable of high-power transmissions and is effective for remote detection purposes. A pulse radar is most commonly used on medium or large vessels due to its expensive installation and maintenance costs. I propose the use of a Frequency Modulated Continuous Wave (FMCW) radar system operated at low-power and high-resolution instead of the conventional pulse-radar based system. The transmitted and received signals of the FMCW radar system were theoretically analyzed and radar signal processing design and simulation experiments were performed to detect the range and speed. Intermediate Frequency (IF) signal mixed with virtual transmit and receive signals were generated to perform FMCW radar signal processing simulations where the IF signal underwent noise reduction through a lowpass filter. The maximum frequency was derived through the sample interval of the FFT size instead of using A/D converter. This maximum frequency was used to get the frequency range and frequency speed which were in turn used to calculate the range and speed. The virtual beat frequency generated using MATLAB is utilized to analyze the beat frequency used in the actual FMCW radar system signal processing. The differences in the range and speed of the beat frequency signals are processed and analyzed.

A Study on Crushing and Engineering Characteristics Caused by Compaction of Recycled Aggregates (다짐으로 인한 순환골재의 파쇄 및 공학적 특성에 관한 연구)

  • Park, Sung-Sik;Chen, KeQiang;Lee, Young-Jae;Moon, Hong-Duk
    • Journal of the Korean Geotechnical Society
    • /
    • v.33 no.12
    • /
    • pp.35-44
    • /
    • 2017
  • A large amount of recycled aggregates was produced and crushed from old buildings and pavements. In this study, when these aggregates are re-used in subbase or subgrade materials in near construction sites, their engineering characteristics caused by crushing are investigated in terms of permeability and shear strength. Three different sizes of aggregates (31.5-45.0 mm, 19.0-31.5 mm, 9.5-19.0 mm) and their mixtures, a total of 7 types of aggregates were used in compaction tests (modified D and B methods). After compaction tests, aggregates were sieved and analyzed with four different breakage factors ($B_{15}$, $C_c$, $B_{10}$, $B_r$). The D compaction method gave 2.0-8.0 times more crushable than B compaction method. The breakage factors for the largest size aggregate was 1.4-3.0 times higher than those of the smallest size aggregate. For aggregates with 5.6-9.5 mm sizes, the samples were prepared with $B_{15}$ of 1, 3, 10, 20, 30, 50, 60, and 70 for permeability and direct shear tests. As $B_{15}$ increased, the hydraulic conductivity decreased up to 1/22 for $B_{15}=50$. As $B_{15}$ increased from 1 to 50, the peak friction angle increased from $46.1^{\circ}$ to $54.5^{\circ}$. On the other hand, the friction angle decreased after $B_{15}=60$.

A Study on Traffic analysis for System Optimization of CDMA base station and repeaters (CDMA 기지국과 중계기의 시스템 최적화를 위한 Traffic 분석 기법)

  • Jo, Ung;Chin, Yong-Ohk
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.27 no.4C
    • /
    • pp.333-341
    • /
    • 2002
  • This article is written to make a foundation for effective radio network engineering by enabling the accurate traffic assumption between Base Station (BTS : Base Station Transceiver Subsystem) md Repeater through the scientific and systematic analysis of mobile traffic dealt within CDMA Base Station. Among these, Repeater, having direct physical connection with BTS, simply does the remote relay function but the volume of the traffic flowed into the repeater is not accountable. The total BTS traffic is the sum of traffic dealt by the BTS and multiple Repeaters. In this article, we tried traffic analysis of this kind by adopting RTD (Round Trip Delay) which is specially designed to measure distribution of the distance between the Base Station and the Mobile station by differentiating the traffic dealt by BTS from traffic dealt by Repeaters. The fact that the connection between mobile station and BTS via Repeater (which is located remotely) yields far more delay than the direct connection between mobile station and BTS is the clue of this article. Based on this fact, Time Delay equipment was put at the receiving side of the Repeater to add certain amount of delay to the traffic to BTS and the result showed that the 99.78% of the traffic can be identified.

국가 생물자원 정보화 현황 및 전망

  • Kim, Chan-Hoe;Byeon, Bong-Gyu
    • Proceedings of the Korean Society of Applied Entomolohy Conference
    • /
    • 2006.09a
    • /
    • pp.45-60
    • /
    • 2006
  • 최근 국제적으로 생물자원의 중요성이 재인식됨에 따라 이들에 대한 체계적이고 안정적인 정보의 구축 및 활용이 국가경쟁력의 척도로 간주할 정도로 중요성이 커지고 있는 실정이다. 또한, 우리나라는 국토의 64%가 산림으로 되어 있어서 다양한 생물종이 서식하는데 매우 적합한 조건을 갖추고 있다. 이에 따라 산림청과 국립수목원은 국가식물자원정보시스템에 이어 곤충정보에 대한 정보화 사업을 2001년부터 추진해오고 있으며 이 결과로 현재 33만여 점에 곤충표본정보가 구축되기에 이르렀다. 현재까지 국내 유수 곤충표본보유기관 22개 기관이 본 사업에 참여하여 다양하고 내실 있는 정보구축이 이루어져 왔으며 이를 통해 명실 공히 국가적인 곤충자원정보망을 갖추게 되었다. 곤충DB의 국가적인 사업이 추진된 지 6년차에 이르는 2006년도에는 정보통신부의 지원을 받아 14개 표본보유기관이 참여하여 곤충표본DB구축을 중점 추진할 계획이다. 2006년도의 목표량은 곤충표본정보 17,000점으로 기존구축자료 이외에 추가가 필요한 표본정보위주로 구축될 예정이다. 또한, 이미 구축된 곤충표본자원의 활용도와 가치를 높이기 위해서는 더욱 다양하고 많은 자료의 표본을 추가하여 DB화를 추진함은 물론 이들 각각의 정보들을 식물정보와 연계하여 분석 가능토록 하고 GIS시스템을 도입하여 명실공히 국가적인 곤충자원정보의 종합관리가 될 수 있도록 추진하고 있다. 본 사업이 충실히 수행될 경우 국가 주요 생물자원 중 하나인 곤충정보의 DB확대 구축을 통한 전체적인 현황파악 및 체계적인 관리가 가능해 질 것이며, 이와 관련하여 정보화적인 측면, 경제적 측면, 사화 문화적 측면에서 다양한 효과가 기대되며 앞으로도 이에 대한 내실 있는 운영을 위해서는 정부차원의 종합적인 지원 및 관리가 요구되는 시점으로 판단된다.pm3.42$, 저층수 $23.43\pm3.38$이었으며, 전반적으로 해역별 수질기준 I등급 내지는 II등급을 유지하고 있었고, 공간적으로는 외해측으로 갈수록 외해수와 혼합 확산되어 양호한 수질을 나타내었다. 장기적인 변동특성은 세그룹으로 구분되어진다.기 실험결과 용출용매로 증류수와 해수를 이용했을 때, 제강 슬래그에서 용출되는 납, 구리, 카드뮴, 수은의 용출 경향의 차이를 확인할 수 있었고 이에 따라서, 납, 구리, 카드뮴의 용출 유해성은 낮기 때문에 해양구조물로의 제강슬래그 유효이용은 적합할 것으로 판단되었다.im80%$로 계산되었다. 열형광선량계로 측정된 방사선량은 각각 1.8, 1.2, 0.8, 1.2, 0.8 (70 cm 거리) cGy로 측정되었으며, 환자의 복부 표면에서의 서베이메터를 이용한 측정량은 10.9 mR/h였다. 차폐구조물의 사용 시 전체 치료 동안에 태아선량은 약 1 cGy 정도로 평가되었다. 결론 : AAPM Report No.50의 자료에 따르면, 임산부의 방사선 치료 시 태아의 방사선 피폭선량은 5 cGy 이하일 경우에 방사선 피폭에 따른 태아의 위험이 거의 없는 것으로 제시되고 있다. 본원에서 차폐 구조물을 설치하였을 경우에 측정된 태아선량은 약 1 cGy로 측정되었고, 고안된 차폐구조물은 태아에 도달하는 방사선량을 감소시키기에 적합한 설계임이 입증되었다. 아니라 일반종합병원에서도 CTX-M형 ESBL 생성 E. coli와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한 정기적인 연구와 조사가 필요한 것으로 생각한다., A2-1, B1-1, B2-1의 경우, 강우 일수 감소 이전과 연 유출량 변화는 거의

  • PDF

The Solubility of Ozone in Deionized Water and its Cleaning Efficiency (초순수내에서의 오존의 용해도와 세정효과)

  • Han, Jeoung-Hoon;Park, Jin-Goo;Kwak, Young-Shin
    • Korean Journal of Materials Research
    • /
    • v.8 no.6
    • /
    • pp.532-537
    • /
    • 1998
  • The purpose of this study was to investigate the behavior of ozone in DI water and the reaction with wafers during the semiconductor wet cleaning process. The solubility of ozone in DI water was not only dependent on the temperature but also directly proportional to the input concentration of ozone. The lower the initial ozone concentration and the temperature, the longer the half-life time of ozone. The reaction order of ozone in DI water was calculated to be around 1.5. The redox potential reached a saturation value in 5min and slightly increased as the input ozone concentrations increased. The completely hydrophilic surface was created in Imin when HF etched silicon wafer was cleaned in ozonized DI water containing higher ozone concentrations than 2ppm. Spectroscopic ellipsometry measurements showed that the chemical oxide formed by ozonized DI water was measured to be thicker than that by piranha solution. The wafers contaminated with a non-ionic surfactant were more effectively cleaned in ozonized DI water than in piranha and ozonized piranha solutions.

  • PDF

Synthesis of indium hydroxide powders by a precipitation method (침전법을 이용한 Indium hydroxide 분말의 합성 연구)

  • Choi, Eun-Kyoung;Lee, Won-Jun;Han, Kyu-Sung;Kim, Ung-Soo;Kim, Jin-Ho;Hwang, Kwang-Teak;Kim, Jong-Young;Hwang, Hae-Jin;Shim, Kwang-Bo;Cho, Woo-Seok
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.27 no.3
    • /
    • pp.122-129
    • /
    • 2017
  • For the production of a high-density ITO target, $In_2O_3$ powders with a small particle size and low agglomeration should be synthesized. The purpose of this study is to control the size and shape of the Indium hydroxide precursor which affects the properties of the $In_2O_3$ powder. As a starting raw material, Indium metal was dissolved in a Nitric acid ($HNO_3$) solution. The effect of concentration, pH, and temperature on the properties of Indium hydroxide was investigated using ammonium hydroxide as a precipitant. Crystallite size of each sample was analyzed by X-ray diffraction and the shape and the size of the powder was analyzed by transmission electron microscopy. As a result, the particle size of Indium hydroxide was increased with increase in the concentration of $In(NO_3)_3$ and the particle size and shape of the Indium hydroxide remained unchanged with increase in the pH of the solution. The particle size increased with increase in the precipitation temperature during precipitation.

An Embedded FAST Hardware Accelerator for Image Feature Detection (영상 특징 추출을 위한 내장형 FAST 하드웨어 가속기)

  • Kim, Taek-Kyu
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.49 no.2
    • /
    • pp.28-34
    • /
    • 2012
  • Various feature extraction algorithms are widely applied to real-time image processing applications for extracting significant features from images. Feature extraction algorithms are mostly combined with image processing algorithms mostly for image tracking and recognition. Feature extraction function is used to supply feature information to the other image processing algorithms and it is mainly implemented in a preprocessing stage. Nowadays, image processing applications are faced with embedded system implementation for a real-time processing. In order to satisfy this requirement, it is necessary to reduce execution time so as to improve the performance. Reducing the time for executing a feature extraction function dose not only extend the execution time for the other image processing algorithms, but it also helps satisfy a real-time requirement. This paper explains FAST (Feature from Accelerated Segment Test algorithm) of E. Rosten and presents FPGA-based embedded hardware accelerator architecture. The proposed acceleration scheme can be implemented by using approximately 2,217 Flip Flops, 5,034 LUTs, 2,833 Slices, and 18 Block RAMs in the Xilinx Vertex IV FPGA. In the Modelsim - based simulation result, the proposed hardware accelerator takes 3.06 ms to extract 954 features from a image with $640{\times}480$ pixels and this result shows the cost effectiveness of the propose scheme.

The Effect of pH on Citric Acid Leaching of Soil Contaminated with Heavy Metals (중금속(重金屬) 오염토양(汚染土壤)의 구산(枸酸) 침출(浸出)에 대한 pH의 영향(影響))

  • Jung, Kyungbae;Park, Hongki;Yoo, Kyoungkeun;Park, Jay Hyun;Choi, Ui Kyu
    • Resources Recycling
    • /
    • v.22 no.5
    • /
    • pp.13-19
    • /
    • 2013
  • The effect of pH on the citrate leaching behavior of heavy metal ion was investigated to develop an eco-friendly process for removing heavy metals from soil contaminated with copper, zinc, and lead. The leaching tests were performed using citrate solution with pH adjusted by mixing citric acid and sodium citrate under the following leaching conditions: particle size, under $75{\mu}m$; temperature, $50^{\circ}C$; citrate concentration, $1kmol/m^3$; pulp density, 5%; shaking speed, 100 rpm; leaching time, 1 hour. The difference of pH before and after the leaching test was not observed, and this result indicates the direct effect of hydrogen ion concentration on the leaching of metals was insignificant. The removal ratios of copper, zinc, and lead from the contaminated soil decreased with increasing pH. The thermodynamic calculation suggests that the leaching behaviors of metal ions were determined by two reactions; one is the reaction to form complex ions between heavy metal ions and citrate ion species, and the other is the reaction to form metal hydroxide between heavy metal ions and hydroxide ion.

Crystal Structure of a Bromine Sorption Complex of Dehydrated Calcium and silver Exchanged Zeolite A (칼슘 및 은 이온으로 치환된 제올라이트 A를 탈수한 후 브롬을 흡착한 결정구조)

  • Bae, Myung-Nam;Kim, Un-Sik;Kim, Yang
    • Korean Journal of Crystallography
    • /
    • v.8 no.2
    • /
    • pp.127-131
    • /
    • 1997
  • The crystal structure of a bromine sorption complex of vacuum-dehydrated Ag+ and Ca2+ exchanged zeolite A(a=12,234(1) Å) has been determined by single-crystal X-ray diffraction methods in the cubic space group Pm3m. The crystal was prepared by flow method using exchange solution in which mole ratio of AgNo3 and Ca(NO3)2 was 1:150 with a total concentration of 0.05M. The crystal was dehydrated at 360℃ and 2 ×10-6 Torr for 2days, followed by exposure to 180 Torr of Br2 vapor for 20min. full-matrix least-squares refinements converged to the final error indices of R1=0.111 and R2=0.101 using 90 reflections for which I>3o(I). About 3.1 Ag+ ions and 4.45 Ca2+ ions lie on the two crystallographically nonequivalent three-fold axes associated with 6-ring oxygens. A total of six bromine molecules are sorbed per unit cell. Each bromine molecule approaches a framework oxide ions axially (Br-Br-O=171(2)', O-Br=3.25(6) Å; and Br-Br=2,61(8) Å by a charge-transfer interaction.

  • PDF