• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.55-61
• /
• 1998

The purpose of this study is to compare the predictive behaviors of the extended $k-{\varepsilon}$ turbulence model and the standard $k-{\varepsilon}$ turbulence model. Grid dependency is tested with the H-type grid and the O-type grid. Computations have been performed for a circular-to-rectangular transition duct. Numerical results for several sections along the streamwise have been obtained to compare with experimental results. The Reynolds number is 390,000 based on the bulk velocity at the inlet. The computed axial velocity contours, transverse velocity profiles, static pressure contours, peripheral skin friction coefficient, and peripheral wall static pressure distributions have been compared with experimental results. The computed results obtained with the extended $k-{\varepsilon}$ turbulence model show better agreement with experimental results than those obtained with the standard $k-{\varepsilon}$ turbulence model. Comparing to the computed results obtained with the H-type grid and O-type grid, those with H-type grid agree well with experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.76-80
• /
• 2000

This paper describes a coordinate measuring technique based on optical triangulation using the two images. To overcome the defect of structured light system which measures coordinate point by point, light source is replaced by CCD camera. Pixels in CCD camera were considered as virtual light source. The overall geometry including two camera images is modeled. Using this geometry, the formula for calculating 3D coordinate of specified point is derived. In a word, the ray from a virtual light source was reflected on measuring point and the corresponding image point was made on the other image. Through the simulation result, validation of formula is verified. This method enables to acquire multiple points detection by photographing.

• Korean Journal of Pharmacognosy
• /
• v.33 no.2 s.129
• /
• pp.137-143
• /
• 2002

The inhibitory effects of methanol extracts of 165 medicinal herbs on matrix metalloproteinase-2 (MMP-2) activity were investigated. Amongst the herbal extracts, Youngia denticulate, Platycarya strobilacea, Sedum kamtschaticum, Euscaphis japonica, and Comus controversa showed a significant inhibitory effect with above 80% at $1\;{\mu}g/ml$. Above mentioned five kind extracts, which exclude polyphenols and/or tannin by techniques for their removal, showed a mild inhibitory effect on MMP-2 activity except for Y. denticulate at the same concentration.

• Journal of Power System Engineering
• /
• v.10 no.2
• /
• pp.41-46
• /
• 2006

This study shows a water cooling system by using a steam ejector and jet condenser to drop the temperature of the water by about $5^{\circ}C\;from\;25^{\circ}C$ or higher. In this research, to replace the present water cooling system, we focused on a water cooling system by latent heat of evaporation, thus this system needs a vacuum pressure to evaporate the water in enclosed tank. The water cooling effects are depended on the vacuum pressure in the enclosed tank, and the cooling water is generated by latent head of evaporation. As the experimental results, the absolute vacuum pressure obtained was about $5{\sim}8$ mmHg using a steam driven ejector with jet condenser.

• New & Renewable Energy
• /
• v.4 no.4
• /
• pp.17-22
• /
• 2008

A low concentrating (< 5X) photovoltaic module with aluminum reflectors is fabricated and evaluated which is designed to reduce the affection of the high temperature to the solar cell modules preventing the efficiency lowering. As results, the output power is increased of 1.97X from the concentrating photovoltaic module which is designed with the concentrating ratio of 2.25X and to control the module temperature cooling the module by air circulation. Also, the effect of the concentrating module with aluminum reflectors on the conventional PV module is investigated at the field. The result shows the increase of the output power more than about 20% and the improvement of the module efficiency of 1.4X in spite of the increase of average module temperature.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.508-512
• /
• 2016

This paper discusses a Takagi-Sugeno (T-S) fuzzy controller design problem for a phugoid model-based multi-agent system. The error between the state of a phugoid model and a reference is defined to construct a multi-agent system model. A T-S fuzzy model of the multi-agent system is built by introducing a nonlinear controller. A fuzzy controller is then designed to stabilize the T-S fuzzy model, where the synthesis condition is represented in terms of linear matrix inequalities.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.330-333
• /
• 2003

본 논문에서는 조립/제작, 시험과정을 통하여 개발된 통신방송위성용 Ka 대역 통신위성 중계기의 구조 및 성능에 대하여 기술한다. 개발된 중계기는 전체 400MHz 대역 내에 100 MHz 대역폭을 갖는 3 개의 통신채널을 수용하여 광대역 멀티미디어 서비스를 지원할 수 있도록 설계되었으며 국내 기술로 제작되어 우주인증을 거친 IFA, RxDC, IMUX, CH-AMP 등의 부품으로 구성되어 있다. 중계기에 대한 성능시험은 EGSE를 이용해 자동으로 수행되었으며, 성능시험결과 대부분의 성능 항목이 요구사항과 부합됨을 확인하였다. 제작된 Ka 대역 중계기에 적용된 위성 중계기 및 부품의 제작 및 시험 기술은 향후 통신해양기상위성에 탑재될 중계기의 개발에 직접 응용이 가능하다.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.415-431
• /
• 2010

Station-area development need transportation system and efficiency of public transit operation. but it had a great difficulty in developing by lack of profitability station-area because the excessive public contributions, and increase of land usage, a lot of tallege. Recently station-area development accelerated by the new law has been overridden and more efficient transport system configuration stations, possible of urban regeneration. The purpose of this study is to successful promotion of the urban Planning by Unit-Station-area development, the optimal method of financing, changeable of zoning to the development of high density.

• Journal of Welding and Joining
• /
• v.21 no.5
• /
• pp.513-517
• /
• 2003

Resistance welding processes are widely used in automotive applications. In particular, Mash-Seam resistance welding is typically used in Tailored Blank process. If spot welds are changed to a continuous weld, it's easy to reduce noise and to be more stable in cars. A arc welding, laser welding, seam welding using wheel electrode are available to make continuous welds on a car body, but they demand operator with advanced skills and expensive cost to develop. Therefore, flat electrode continuous mash-seam resistance welding process has been used to improve the weak points in currently available system in lap seam welding. This developed process has much more strength and air tightability, and also has much better plastic workability than laser welding. Moreover, commercial RSW machine can be readily used in this welding process.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.6
• /
• pp.526-530
• /
• 2011

This paper presents a new fuzzy model-based design approach for waypoints-tracking control of nonlinear underwater vehicles (UUVs) on a horizontal plane. The waypoints-tracking control problem is converted into the stabilization one for the error model between the given nonlinear UUV and the waypoints. By using the sector nonlinearity, the error model is modeled in Takagi-Sugeno's form. We then derive stabilization conditions for the error model in the format of linear matrix inequality. A numerical simulation is provided to illustrate the effectiveness of the proposed methodology.