• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.303-310
• /
• 2016

Due to the ossification of the Internet, it is difficult to accommodate variety services. One of the efficient solution to this problem is network virtualization. It allows multiple parallel virtual networks to run on the shared physical infrastructure. It needs new resource allocation mechanism to share efficient physical resources. In this paper, we present efficient bandwidth allocation algorithm for virtual network request with high service priority. Our proposed algorithm can withdraw allocated bandwidth from low-level priority virtual network and maintain low-level virtual network service. We evaluated the performance of our proposed algorithm using simulation and found the improvement of approximately 8% acceptance rate.

• Journal of KIISE:Information Networking
• /
• v.28 no.1
• /
• pp.93-101
• /
• 2001

멀티캐스트 응용을 다루는 기존의 많은 네트워킹 솔루션들은 특정한 트랜스포트 기술에 기반을 두고 있기 때문에 인터넷, ATM과 같은 하부 트랜스포트 네트워크에 따라 서로 다른 접근 방법을 필요로 한다. 본 논문에서는 여러트랜스포트 네트워크에 적용 가능한 새로운 멀티캐스트 서비스 구조(MSA: Multicast Service Architecture)를 제안한다. MSA는 기존의 트랜스포트 네트워크 프로토콜들이 연결제어를 위하여 그대로 사용될수 있도록 설계되어 최소한의 변경으로 기존 트랜스포트 네트워크 상에서 운용될 수 있다. MSA는 트랜스포트 네트워크에 독립적으로 다양한 멀티미디어 멀티캐스트 응용들을 수용할 수 있으며 망 중심의 통신관리체계를 규정한다. MSA는 여러 가지 개념들을 도입하여 유연하고 확장성 있는 통신관리를 지원하는데 특히 호/연결제어 기능을 단말로부터 분리하여 정의함으로써 원격제어와 제어의 이동성을 지원할 수 있다. 따라서 사용자는 보다 다양한 방법으로 멀티미디어 멀티캐스트 서비스를 이용할 수있게된다. 또한 단말관리자와 가상 디바이스 개념을 도입하여 응용 개발자가 트랜스포트 네트워크나 물리적 디바이스의 상세한 특성을 모르더라도 응용을 설계할 수 있도록하였다. MSA를 구성하는 여러개의 서비스 컴포넌트들은 미들웨어 상에서 동작한다. 우리는 시뮬레이션을 통하여 MSA를 분석하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2243-2250
• /
• 2014

In wireless sensor networks(WSNs), geographical routing algorithms can enhance the network capacity. However, in real WSNs, it is difficult for each node to know its physical location accurately. Especially, indoor environments contain various obstacles such as concrete wall, furniture which cause non-line-of-sight(NLOS) conditions. To solve the problem, we propose location error compensation algorithm by using two difference topology constructions. First topology is based on mobile node's location which is obtained from anchor nodes. Second topology is based on mutual distance from neighbor nodes. The proposed algorithm efficiently detects and corrects the location errors and significantly enhances the network performance of geographic routing in the presence of location errors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1031-1038
• /
• 2004

The call admission control algorithm of hybrid scheme is proposed to enhance the QoS(quality of service) of attempted multimedia calls. In the initial stage of 3rd generation multimedia services networks, the major limitations include the small sefyice coverage and the limited radio link capacity. Because the initial massive deployment of network elements such as base stations, base station controllers, and mobile switching centers is restricted to populated areas and the other areas should be covered with the fewer network elements, the radio channel resources are hmited and coverage network is supposed to be established. Therefore the QoS of multimedia services is expected to be severely degraded when tentative traffic hot spot occurs frequently. Thus, the blocking probability of attempted calls mcreases when relatively large number of users try to place multimedia calls in a hot spot area of the wireless networks. In this situation, the proposed hybrid scheme can mitigate the degradation of the QoS of multimedia services by using the available radio channels of the neighboring cells.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.10
• /
• pp.40-50
• /
• 1999

The novel network architecture is recently required to accommodate a variety and intelligence of communication services. It is also required to provide customized network functions and to efficiently satisfy a various user's requirements. Accordingly, open network architecture based on ATM transport network features has been mainly studied in communication network. This paper evaluates the VSN(Virtual Switch Network) characteristics in the call processing of IMT-2000 switching system, which is composed of VSN instead of ATM switch network. VSN means switch network which is composed of ATM transport network. As a result, this paper proposes new VSN based ATM-MSC architecture with integrated call and connection control systems. and evaluates call processing delay characteristics using call process procedures. Internal call processing delay is increased approximately 3.5msec than the conventional ATM switching system. The experimental values applied in the analysis condition are the load 0.8, and the 100km distance between CCCPs(Call and Connection Control Processors) and VSNs. It is confirmed that the VSN has the potentiality in the practical implementation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.105-111
• /
• 2003

Qualification Model of On-board Computer (OBC) for KAISTSAT-4 was developed. The OBC of KAISTASAT-4 has some improved features compared with that of KAISTSAT-3: To reduce weight and size of OBC many logics are implemented by FPGAs, and a network controller is included in OBC to access the satellite network with high speed. Also, the developed OBC has an improved tolerance against SEUs and faults. The OBC was fully tested under simulated space environment with no errors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2533-2540
• /
• 2009

Performance of processing protocols is one most important goal in a network or systems constituting the network. Measurement of performance, thus, is an essential element to not only establish the network but also develop systems. A projection in vector mathematics is the transformation of points and lines in one plane onto another plane by connecting corresponding points on the two planes with parallel lines. This is a method, as an application of vector mathematics, which is widely used in engineering as well to consider elements dedicated to the measurement object. This paper proposes a sound methodology for measuring the performance of the SIP protocol, which is based on the projection. The SIP protocol is a typical standard protocol for call-processing in the internet telephony of Next Generation Convergence Network. Owing to use the projected protocol which excludes unnecessary operation paths, the methodology can be effective in implementation and resource utilization. This paper also presents a process based on the proposed methodology to measure the performance of a SIP proxy server.

• Electronics and Telecommunications Trends
• /
• v.20 no.1 s.91
• /
• pp.93-99
• /
• 2005

최근 새롭게 등장한 유비쿼터스 컴퓨팅 환경은 기존의 컴퓨팅 환경과는 다르게 통신 인프라가 없는 환경에서도 동작이 가능한 저전력 소출력의 무선 센서간의 네트워크를 형성하고 이들간의 정보 유통이 이루어진다. 이러한 u-센서 네트워크는 Ad-hoc 성격뿐만 아니라 무선이 가지는 방송 특성으로 센서정보의 도청, 비정상적 패킷의 유통, 메시지의 재사용 등의 데이터 위. 변조 문제와 네트워크 전체를 마비시킬 수 있는 서비스 거부 등의 공격에 쉽게 노출된다. 본 고에서는 센서 네트워크에서의 정보보호요구사항과 구조, 키 관리의 문제 및 라우팅과 수집된 데이터를 집계하는 데 있어서의 보안 이슈와 동향에 대해 소개한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.176-184
• /
• 2000

Possible representation methods for the product structure have been compared and analyzed to determine optimal disassembly path of a product. Petri net is selected as the most optimal method to represent disassembly path of the product. In this method, a reachability tree for the product is generated and disassembly time for each path is calculated. A path with the smallest disassembly time is selected as the optimal path. A software far DPN(Disassembly Petri Net) has been developed and applied to search the optimal disassembly path for a ballpoint pen disassembly process as an example.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06d
• /
• pp.296-300
• /
• 2007

유비쿼터스 환경의 센서 노드들은 데이터 전달을 위해 무선 통신을 수행한다. 또한 노드들의 위치정보를 활용하면 통신 경로선택에 큰 이점을 가지게 된다. 그래서 이동성을 갖춘 센서 노드 위치를 정확히 측정하기 위해 별도의 GPS, 초음파 센서 등을 부착한다. 그러나 센서 네트워크는 제한된 전력 사용과 낮은 비용 유지가 요구된다. 또한 기존의 애드혹 기반의 위치측정과 전체 망의 생존성을 고려해야 하는 센서 네트워크간의 상황이 적용 모델의 변수로서 작용한다. 본 논문에서는 컴퓨팅 자원이 부족한 센서 네트워크에서 다음의 조건을 만족하는 위치측정 방법을 제안한다. 첫째 빈번하게 이동하는 센서 노드의 이동성을 고려한다. 둘째 위치측정을 위한 별도의 장비를 추가하지 않는다. 셋째 노드의 송신출력 분석에 기반하여 상대적인 위치를 검출한다.