• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.155-177
• /
• 2012

This paper aims at measuring the changes of Malmquist productivity and technical efficiency of Korean shipbuilding Industry and examinig their determinants utilizing the panel analysis. The increase of the technological progress was greater than technical efficiency, resulting in the increase of the total factor productivity for the period of 2004-2010. This study also employs the panel technique to analyse the effects of Employee, Dock, and Length on the changes of Malmquist productivity and technical efficiency. The dependent variables are obtained from three combinations, which are (Employee, Dock, and CGT), (Employee, Length, and CGT), and (Dock, and Length, and CGT). The empirical results show that all of the explanatory variables have a positive effect on the change of Malmquist productivity and technical efficiency.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.41-45
• /
• 2005

This experiment was carried out to identify the proper transplanting time at reclaimed saline land in the southwestern area of Korea from 2002 to 2004. The rice cultivars tested were Samcheonbyeo(Early maturing one), Nampyeongbyeo (Medium maturing one) and Hwaseongbyeo(Mid-late maturing one). The results are summarized as follows: No. of spikelet per the unit area was higher at transplanting on May 20 than those of the other transplanting time. when Samcheonbyeo was transplanted early, the ripened grain rate was high. But, Hwaseongbyeo and Nampyeongbyeo wasn't differ among transplanting time. The yield of milled and head rice(YMHR) was high transplanted May 20 in Samcheonbyeo, May 30 in Hwaseongbyeo, from May 20 to June 9 in Nampyeongbyeo. Among the varieties YMHR was higher in the order of Hwaseongbyeo, Samcheonbyeo and Nampyeongbyeo. There wasn't different of amylose and protein content among the transplanting time and varieties. But, palatability value was low transplanted early(May 20). Considering the rice growth, the rice good quality, the yield of milled and head rice, the proper transplanting time was May 20 to May 30 in Samcheonbyeo and Hwaseongbyeo, whereas Nampyeongbyeo was from May 20 to-June 9.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.46-50
• /
• 2005

This study was carried out to investigate the proper nitrogen fertilizer level at reclaimed saline land in the southwestern area of Korea from 2002 to 2004. The rice cultivars tested were Samcheonbyeo(Early maturing one), Nampyeongbyeo (Medium maturing one) and Hwaseongbyeo(Mid-late maturing one). The results aye summarized as follows: The more the nitrogen level, the more number of panicle and spikelet per unit area was. But, ripened grain rate and 1000-grain weight were decreased at higher nitrogen level. As higher nitrogen level, head rice rate was decreased and protein content was increased. But, amylose content wasn't differ among the nitrogen fertilizer application levels. As increase nitrogen level in head rice yield increased up to 12 kg/10a, 11 kg/10a, in Samcheonbyeo, Hwaseongbyeo and Nampyeongbyeo, respectively. But there wasn't different more than it. Consequently, considering the yield of head rice, ripened grain rate and rice quality. The proper nitrogen fertilizer application level was 11-12 kg/10a at reclaimed saline land in the southwestern area of Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.697-704
• /
• 1995

This experiment was carried out to elucidate the effect of the midsummer drainage times and some growth regulators on lodging characters, lodging and yield in puddled-soil drill seeding in rice. Dongjinbyeo, the mid-late maturing rice variety was seeded at May 11 by seeding machine with 4cm of furrow depth. Experimental plots were divided two main treatment without midsummer drain and two time drains (30 and 50 days after seeding), Inabenfide(IBF) was applied 40days before heading(DBH) and IBP was applied at 30DBH, respectively. Culm length was shorten, the wall of N$_4$ was thicken, and the breaking weight was increased at two time drainage and growth regulators applied in order of Inabenfide, IBP, and Control. Lodging wasn't occurred at two time drainage but it was occurred at none drainage in the order of Control, IBP, and Inabenfide applied. Yield was higher at two time drainage compared with none drainage and higher in order of Inabenfide, IBP and Control in none drainage but wasn't significantly different among growth regulators applied in two time drainage. Therefore, two times midsummer soil drying is recommendable management method for puddled -soil drill seeding of rice. Rice, Direct seeding, Puddled-soil, Drill seeding, Midsummer drainage, Growth regulator, Lodging.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.63-75
• /
• 2000

Stated Preference (SP) data has been regarded as more useful than Revealed Preference (RP) data, because researchers can investigate the respondents\` Preference and attitude for a traffic condition or a new traffic system by using the SP data. However, the SP data has two bias: the first one is the bias inherent in SP data and the latter one is the attrition bias in SP panel data. If the biases do not corrected, the choice model using SP data may predict a erroneous future demand. In this Paper, six route choice models are constructed to deal with the SP biases, and. these six models are classified into cross-sectional models (model I∼IH) and dynamic models (model IV∼VI) From the six models. some remarkable results are obtained. The cross-sectional model that incorporate RP choice results of responders with SP cross-sectional model can correct the biases inherent in SP data, and also the dynamic models can consider the temporal variations of the effectiveness of state dependence in SP responses by assuming a simple exponential function of the state dependence. WESML method that use the estimated attrition probability is also adopted to correct the attrition bias in SP Panel data. The results can be contributed to the dynamic modeling of SP Panel data and also useful to predict more exact demand.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.1
• /
• pp.56-63
• /
• 1983

On a newly reclaimed soil, an experiment was carried out for the elucidation of proper rate of phosphorus fertilizer and application method to increase soybean yield in Honam area. 1. The yield was high in whole layer placement of phosphorus fertilizer and low in deep placement. 2. Broadcasting with 15% of phosphate fixation coefficent and whole layer and deep placement of fertilizer with 10% of phosphate fixation coefficent showed maximum yield. 3. Large application of phosphate increased stem diameter and number of blanches and podes. 4. Application of phosphorus fertilizer increased phosphate content in soil from 9 ppm to 48-223 ppm and contents of bases 5. Significant positive correlation was obtained between soybean yield and phosphorus uptake amount.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.114-121
• /
• 1997

Latex Coated Urea(LCU) was compared with ordinary urea under different methods of application in terms of N use efficiency and yield of rice, 1995 and 1996. The study was carried out on Jeonbug silty clay loam, in Honam Agricultural Experiment Station. The fertilizer treatments involved (1) conventional application of urea (44kg N/ha at transplanting, 33kg N/ha at five leaves stage, 33kg N/ha. (4) 55kg N/ha at transplanting and 33kg N/ha as urea at panicle initiation stage, and (5) without N. It was found that by combining LCU(as basal application) and urea(as topdressing at panicle initiation stage), at the rate of 80% of conventional rate with ordinary urea is most effective for the saving of N and increasing the use efficiency of N by rice. It was, however, observed that the efficacy of LCU was affected by the temperature during the growth of rice.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.165-191
• /
• 1990

Although a number of studies have been performed to assure that residual stress caused by a mismatch of alloy porcelain thermal expansion can contribute to clinical failure of a ceramometal restoration, the interactive influence of cooling rate on the magnitude of thermal expansion difference and on bond strength between them have not been extensively analyzed. The objective of this study was to determine the influence of cooling rate and the number of firing cycles on the expansion mismatch and the flexural failure resistance of metal porcelain strip. Tested alloys included one Pd-Ag alloy, one Ni-Cr-Be alloy with two kinds of porcelain, Vita and Ceramco. Metal specimens were cast into rods with a height of 13mm and a diameter of 5mm. Subsequently, the castings were subjected to scheduled firing cycles without porcelain. And the porcelain specimens after being fired were trimmed into a bar with a final dimension of $5{\times}5{\times}25mm$. Thermal expansions of the alloys and porcelains were measured by using a push rod or a differential dialometer respecitvely. Porcelain glass transition temperatures and expansion values were derived alloy-porcelain pairs were assessed by comparing expansion values of the components at a porcelain glass transition temperature. Calculations were made using combinations of a Ni-Cr alloy or Pd-Ag alloy with each of two porcelain products. Metal-porcelain strip specimens were subjected to four point loading in an Instron testing machine until crack occured at the metal-cramic interface at the time of sharp decrease of load on recorder. On the basis of this study, the following conclusions may be stated: 1. Regardless of the kinds of ceramometal combinations, both of calculated and experimental data revealed that the double fired specimens exhibited a significantly lower flexural strength. 2. By the rise of the amount of mismatch, bond strength were decreased. 3. Thermal expansion value of Pd-Ag alloys were higher than that of Ni-Cr alloys. 4. Expansion curves of metal were proportional to the increase of temperature and were not affected by the experimental conditions, however porcelains did not show the same magnitude of metal, and a shift of the glass transition temperature to higher temperatures was observed when cooled rapidly 5. Alloy-porcelain thermal compatibility appeared more dependent on the porcelain than the alloy.

• Clinical and Experimental Pediatrics
• /
• v.53 no.2
• /
• pp.158-162
• /
• 2010

Purpose : Turner syndrome (TS) is a disorder in which various anomalies can be accompanied, especially cardiovascular, renal, thyroid and auditory problems. The aim of this study is to identify the incidence of these disorders in patients with TS according to karyotype. Methods : We reviewed medical records of 90 patients with TS diagnosed by chromosomal analysis in 4 hospitals from Jan 1998 to Dec 2007. We evaluated these cases by prepared protocol of 4 medical problems.Results : The distribution of karyotype was 45,X (47.8%), mosaic pattern (34.4%) and structural aberration group (17.8%). Renal anomalies, cardiovascular anomalies, thyroid disorders and auditory problems are accompanied in 4.4%, 10.0 %, 11.1% and 5.6%, respectively. 45,X group had renal anomalies (7.0%), cardiovascular anomalies (18.6%), thyroid disorders (9.3%) and auditory problems (11.6%). Mosaic group had renal anomalies (3.2%), thyroid disorders (12.9%), no cardiovascular anomalies and auditory problems. Structural aberration group had cardiovascular anomalies (6.3%), thyroid disorders (12.5%) and no other 2 problems. Patients with 45,X group had a significant higher incidence of cardiovascular anomalies (P =0.025). Conclusion : Our results indicate that there are differences clinically according to karyotype of TS, especially in incidence of cardiovascular anomalies.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.3
• /
• pp.383-387
• /
• 2006

Microbiological hazard analysis of foodservice facilities and utensils of 6 hospitals in the Honam region was evaluated. In the microaerosol evaluation, the microbial counts of dinning table, kitchen, and freezer were comparatively high, and it indicated the microbial contamination of these facilities should be effectively managed. In the microbiological hazard analysis evaluation of cooking utensils and appliances, the total plate counts of cutting boards, knife, and meal plates were comparatively high but did not reveal significance. The counts of coliforms, Staphylococcus aureus and Escherichia coli, were lower than the general limit of microbial contamination, and the microbiological safety of the cooking utensils and appliances were satisfactory. In the microbial safety evaluation of side dishes, microbial counts of heat-cooked foods were generally low and microbiological hazards of these side dishes were comparatively low.