• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.19-19
• /
• 2010

현재 산업에서 높은 정밀성과 설치의 간편함으로 이용량이 증가하고 있는 초음파 유량계는 압전진동자를 사용하여 측정을 한다. 일반적으로 초음파 유량계에서 초음파를 발생하고 수신하는 압전 세라믹 진동자의 경우 대부분 $200^{\circ}C$ 이상의 고온에서는 사용이 불가능하다. 따라서 고온에서의 이용을 위한 사용가능 온도의 영역을 개선하기 위한 조성이나 구조적인 변화가 필요하였고, 조성변화에 있어서는 한계가 있기 때문에 구조 측면에서 접근하고자 하였다. 초음파 유량계의 구조에 있어 외접형 도파관 방식을 선택하였으며, 도파관의 길이, 방열판의 개수, 재질 등의 변수에 대하여 시뮬레이션을 하였다. 시뮬레이션 결과를 바탕으로 얻어진 결과에 대하여 샘플을 제작하였으며, 압전 진동자에 도달되는 온도를 평가 하였을 시 방열판에 대한 온도감소효과를 얻을 수 있었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.4
• /
• pp.417-424
• /
• 1987

The seeds of three barley varieties of which initial seed vigor were different were used to measure seed vigor of accelerated aging techniques. A vigor index derived from the product of percent germination and plumule length was used to estimate seed vigor. The index was compared with the results of other tests. The results of warm germination test well suited to the measurements of seed vigor at the advanced stages of seed deterioration. Other vigor measurements except ATP and GADA values, showed close relationships with the vigor index. The measurements of plumule length in cold test and tetrazolium test were found to be appropriate for predicting seed quality.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.148-156
• /
• 1999

The thermal postbuckling and vibration characteristics of cylindrical composite panel subject to thermal loads are analyzed using finite elements. The von-Karman nonlinear displacement-strain relation based on the layerwise theory is applied to consider large deflections due to thermal loads. Cylindrical arc-length method is used to take into account the snapping phenomena. Thermal snapping and vibration characteristics are investigated for various structural parameters such as thickness ratio, shallowness angle and boundary conditions. The present results show that thermal snapping changes the mode shapes as well as static deformations.

• Journal of the Korean Magnetics Society
• /
• v.5 no.6
• /
• pp.956-962
• /
• 1995

본 연구에서는 포화지방산으로 피복된 초미립 마그네타이트(Magnetite, Fe$_{3}$ $O_{4}$) 중에 nonanoic acid가 용해되어 있는 알칼리 수용액을 첨가한 후, 이들 슬러리(slurry)를 건조하여 kerosene에 분산시켜 유상자성유체를 제조하였다. Stearic acid 첨가량에 따른 분산율의 변화를 조사한 결과 stearic acid 첨가량이 증가함에 따라 분사율은 증가하였으나, 2.6 * $10^{-2}$ mol 이상에서는 분산율이 78%로 감소하 였다. Stearic acid로 피복된 마그네타이트에 의해 유상자성유체제조시 분산안정제로서 사용된 nonanoic acid 첨가량에 따른 분산율의 변화를 조사한 결과 nonanoic acid 를 첨가하지 않은 경우 분산이 일어나지 않았으나, nonanoic acid를 첨가함에 따라 분산율은 급격히 증가하였다. 포화지방산을 계면활성제로 사용하여 흡착-유기상 분산 법에 의해 유상자성유체를 제조한 결과, $C_{12}$ ~ $C_{16}$ 지방산을 사용하여 유상자성유체를 제조할 경우 20% 내외의 분산율을 나타내었다. 분산제로서 Nonanoic acid를 사용하여 유상자성유체를 제조할 경우 $C_{10}$ 지방산으로 제조한 유상자성 유체는 분산이 일어나지 않았으나, C 사슬의 길이가 증가함에 따라서 분산율은 급격히 증가하였으며 $C_{15}$ 지방산 부터는 90% 이상의 분산율을 나타내었다.

• KOMUNHWA
• /
• no.57
• /
• pp.195-210
• /
• 2001

One kiln site of Koryo Earthenware in Hwakok-ri, Ansung was excavated from March 15, 1999 to May 15, 1999 by Museum Team of Ehwa Women's University, and also other one earthenware kiln site was confirmed as exposed figure on the ground. In this study, the

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.1
• /
• pp.73-82
• /
• 2014

This study was conducted to investigate the ear and kernel characteristics of waxy corn during ripening by double cropping, and to understand the pattern of starch accumulation in endosperm of waxy corn kernels. Chalok4 and Ilmichal were sown at April 20 (first cropping) and July 20 (second cropping) in 2011~2012. The accumulated temperature from silking to harvesting was about $590{\sim}630^{\circ}C$. It takes 23~24 days when Chalok4 and Ilmichal were sown in April 20, but July 20 sowing takes 32~35 days. Ear length and kernel set length were significantly shorter in second cropping (p<0.05). Kernel length, kernel width, 100-kernel weight, and starch content of waxy corn were increased as ears matured (p<0.05). Growth temperature was getting decreased during the ripening stage of second cropping, the rate of ear and kernel development had slowed. Starch granules started to accumulate in the cells around the pericarp, then developed in the cells around the embryo. In the second cropping, starch granules in the kernel of waxy corn were less compact than the first cropping, harvesting time of waxy corns can be extended. These results will be helpful to farmers for double cropping of waxy corn cultivation and management.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.311-316
• /
• 2015

This paper presents a design method for thin but wideband absorbers using resistive sheets. Its equivalent circuit consists of a series RLC resonant circuit and a short-terminated transmission line. Based on this equivalent circuit, we presented the three conditions for an electromagnetic absorber which has a thickness less than a quarter wavelength and wide absorption bandwidth at center frequency. By using an root-finding algorithm, the equivalent resistance, capacitance, and inductance of the absorbers are obtained. These equivalent circuit values for the absorber surface can be realized by a 2D periodic cross-shaped structure which has required surface resistance. Using the design method, we have designed the absorber which has 18.75 mm($67.5^{\circ}$ electrical length) thickness and 90 % absorption bandwidth of 116 % bandwidth at 3 GHz.

• Tunnel and Underground Space
• /
• v.9 no.4
• /
• pp.315-327
• /
• 1999

Rock fracture mechanics has been widely applied to blasting, hydraulic fracturing, rock slope and many other practical problems in rock engineering. But a measuring method for the fracture toughness of rock, one of the mort important parameters in fracture mechanics as an intrinsic property of rock, has not been yet well established. To obtain mode I rock fracture toughness, the more favorable disc-typed specimens such as CCNBD, SCB, chevron-notched SCB and BDT were used in this study. Rock fracture toughness under mixed-mode and mode II conditions was measured by using the STCA applied to the CCNBD specimen. Size effects such as specimen thickness, diameter and notch length on fracture toughness were investigated. From the mixed-mode results, fracture envelops were obtained by applying various regression curves. The mixed-mode results were also compared with three mixed-mode failure criteria. In each fracture toughness test, acoustic emission was measured to get the data for determining the load levels of different crack propagation patterns.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.200-208
• /
• 2002

Two-component polyurethane flame-retardant coatings were prepared by blending trichloro lactone modified polyesters (TAPTS) and isocyanate, Desmodur IL. Polycondensation reaction of trichlorobenzoic acid (TBA) as a flame-retardant component, and adipic acid with trimethylolpropane, polycaprolactone 0201, and 1,4-butanediol gave the corresponding TAPTs. The content of TBA was adjusted from 10 to 30 wt% in our experiment. It was found that various properties of these new flame-retardant coatings were comparable to other non-flame-retardant coatings. We also carried out three different tests for the measurement of flammability of flame -retardant coatings. The results of vertical burning test for the coatings containing more than 20 wt% of TBA were determined as 'no burn'. The results of flammability test for the coatings with 20 and 30 wt% of TBA contents indicated the limiting oxygen index (LOI) values of 25% and 27% respectively, which implied relatively good flame retardancy. They also showed the char length of 3.6-5.2 cm according to $45^{\circ}$ Meckel burner test, which can be classified as the first grade flame-retardant coatings.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.677-690
• /
• 1995

In this paper, we propose the high efficiency data compression capable of error control using block-sorting, move to front(MTF) and arithmetic code with variable length in to fixed out. First, the substring with is parsed into length N is shifted one by one symbol. The cyclic shifted rows are sorted in lexicographical order. Second, the MTF technique is applied to get the reference of locality in the sorted substring. Then the preprocessed sequence is coded using VF(variable to fixed) arithmetic code which can be limited the error propagation in one codeword. The key point is how to split the fixed length codeword in proportion to symbol probabilities in VF arithmetic code. We develop the new VF arithmetic coding that split completely the codeword set for arbitrary source alphabet. In addition to, an extended representation for symbol probability is designed by using recursive Gray conversion. The performance of proposed method is compared with other well-known source coding methods with respect to entropy, compression ratio and coding times.