• Journal of the Korean GEO-environmental Society
• /
• v.10 no.1
• /
• pp.43-48
• /
• 2009

This study was performed to investigate the characteristics of nutrient removal by Sequencing Batch Reactor (SBR) system, which could achieve high removal efficiencies of nitrogen and phosphorus and make it possible convenient management and operation. In this study, dissolved oxygen (DO), chemical oxygen demand (COD), nitrogen, and phosphorus in SBR system were examined by variation of anoxic-oxic phase repetition in order to optimize an operational method. The 1~4 times of anoxic-oxic phases (Run 1~4) were repeated during 1 cycle operation period. As the repetition frequency increased, it was more difficult to maintain DO condition enough for denitrification. The SBR system showed high COD removal efficiency more than 91% regardless of operational condition. About 68% of nitrogen removal rate was obtained in conditions of 2 or 3 times repetition of anoxic phases, in which NOx-N among discharged total nitrogen account for more than 99%. Approximately 40% of phosphorus was eliminated in the conditions of 1~3 times of anoxic phase repetition.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.966-970
• /
• 2010

본 연구의 대상지인 인천광역시, 부천시, 서울특별시, 김포시를 걸쳐서 흐르는 굴포천은 산업화와 도시화로 인한 생활하수 및 공장폐수의 유입, 느린 유속과 하천 복개 등과 같은 유입오염원과 하천 구조적 문제로 인하여 수질이 악화되어 왔다. 특히 하천변의 소규모 영세 공장, 중 상류에 형성된 대규모 공업단지, 지역개발에 따른 인구증가로 인한 생활하수 등은 굴포천의 주 오염원이다. 또한 직강화된 하도와 느린 유속 등 하천의 구조적인 문제점 등은 하천의 자정능력을 저하시키고 있어 현재 굴포천의 수질수준은 전국 최하위에 머물러 있다. 더욱이 입자상 오염물질의 퇴적으로 인하여 굴포천의 하상은 대부분 퇴적오니가 형성되어 있다. 이러한 퇴적오니는 다량의 유기 물질 및 중금속 등을 흡착하고 있고, 재용출에 의한 내부오염 가능성을 내포하고 있기 때문에 오염원이 제거된 후에도 계속적인 수질오염을 일으킬 수 있다(Alloway et al, 1988). 따라서 본 연구에서는 굴포천 본류 전 구간 및 유입지천에 대하여 수질 오염도와 오염부하량을 산정하였으며, 본류 하상 퇴적물의 오염도 및 퇴적물의 용출특성에 관한 조사를 수행하였다. 본 연구는 굴포천 본류 구간을 최상류(GP-1)부터 최하류(GP-7)구간까지 총 7개 구간으로 구분하여 실시하였으며 각 지점별 수질 및 퇴적물 오염도를 조사하였다. 또한 3개의 유입지천에 대하여 수질 오염도 및 오염부하량을 산정하였다. 굴포천 하상의 경우 최상류의 GP-1지점을 제외하고는 전 구간이 대부분 오염된 오니가 퇴적되어 있으며, 이러한 퇴적오니의 퇴적물 오염도를 분석해본 결과 상류부인 GP-1, GP-2와 유속이 비교적 빠른 GP-7지점에 비하여 나머지 지점들의 오염도가 매우 높은 것으로 나타났다. 이러한 하상퇴적물의 영양염류 용출특성을 알아보기 위하여 호기 및 혐기조건에서 용출실험을 실시한 결과 호기와 혐기 조건에서 T-N은 각각 34.84 $mg/m^2/day$, 66.93 $mg/m^2/day$의 용출속도를 보였고, T-P의 경우 호기 조건 시 5.33 $mg/m^2/day$, 혐기 조건 시 6.84 $mg/m^2/day$의 용출속도를 보임으로서 퇴적물 용출에 의한 내부오염의 가능성이 있음을 보였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.115-120
• /
• 1997

영광3호기 방사선관리구역에 대한 중성자선량률을 정확히 평가하기 위하여 MCNP4A 전산코드를 이용, 방사선관리구역에서의 중성자 스펙트럼 계산을 수행하였다. 영광3호기에 대한 보다 정확하고 정밀한 3차원 몬테칼로 모델을 구축하기 위하여 핵연료집합체 구성요소 및 원자로심을 둘러싸고 있는 baffle, barrel,압력용기 등을 정확하게 묘사하였으며, 특히 방사선관리구역 주위의 구조물에 대해서도 3자원 MCNP 모델을 구축함으로써 원자로심부터 방사선관리구역까지 완전한 몬테칼로 모사(full-scope Monte Carlo simulation)를 이용한 계산을 수행하였다. 계산결과는 에너지 구간에 따른 중성자속 스펙트럼으로 나타내었으며 이 결과를 바탕으로 중성자속에 대한 선량률 환산인자를 고려하여 중성자선량률을 계산할 수 있다.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.11
• /
• pp.39-47
• /
• 2021

Tunneling is widely increased in rail-road construction due to the large portion of mountainous regions in Korea as well as the improving running performance of train. Tunneling under poor rock condition, shallow overburden, or existing fault zone has high risk for collapse. Therefore, this study presents the stability of tunnel under unfavorable geological conditions using finite element methods.

• Nuclear Engineering and Technology
• /
• v.23 no.3
• /
• pp.340-351
• /
• 1991

Experimental studies were conducted on a l/5.03 scale reactor flow model of the Yong-gwang Nuclear Units 3 and 4. The purpose of the flow model test was to estimate the hydraulic effect in the reactor vessel due to the relative size difference between the ABB-CE's System 80 and the YGN 3&4 reactors. The flow model was designed according to the principle of similarity. Obtained from the test were the core inlet flow distribution, the core exit pressure deviations, and the segmental and overall pressure losses across the flow path from the reactor vessel inlet to outlet nozzle. These data will be used to provide input data for the core thermal margin analysis and to verify the analytical hydraulic design method.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.4
• /
• pp.31-38
• /
• 2019

Field tests with carbon fiber heating wire (CFHW) embedded inside concrete slab were performed to present the alternative heating material capable of avoid the adverse effects of traditional de-freezing salt on the structures and environment. The CFHW was inserted into the concrete slab in the shape of 'ㄷ' to improve the heat superposition and the temperature on the surface was measured using iButton. The results showed that the temperature where the CFHW's were faced with each other increased to above zero after 12-hour at outdoor air temperature of $-6^{\circ}C$. Comparatively, the temperature slightly increased where the CFHW was embedded on one side because the heat was not superimposed. Hence, it can be said that the CFHW is a suitable heating material to prevent the concrete road from being frozen.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.259-264
• /
• 1997

본 논문에서는 Westinghouse(WH)사에서 공급한 고리 3, 4호기의 증기발생기 모델에 강인제어 기법의 하나인 QFT(Quantitative Feedback Theory)를 적용하여 플랜트에 존재하는 불확실성이나 외란에 대해 강인성을 보장하는 제어기를 설계하였다. 증기발생기의 주파수응답 한계조건은 MATLAB QFT Toolbox를 이용하였으며, loop shaping에 의한 전달함수 식별을 위해서 근사화 기법을 적용하였다. 그리고 5∼20[%]의 저출력구간에서 모의실험을 하여 본 논문의 유용성을 보였다.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.8
• /
• pp.13-20
• /
• 2023

Tunnelling through the geological anomalies has widely known to have many difficulties such as bottom heave, crack of lining, squeezing and so on. To stabilize the tunnel during the construction or after construction, various reinforcing methods have been introduced and applied such as micropiling at the bottom of tunnel to prevent the bottom heave. In this study, long-term behavior of tunnel in the presence of geological anomalies was predicted using numerical analyses. To this end, material properties for swelling rock model capable of representing the rock swelling behavior was obtained using matching process with measured data to validate the adopted model. After the model validation, simulations were performed to predict the long-term behavior of tunnel in the geological anomalies.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.3
• /
• pp.310-319
• /
• 2001

Background : The peak flowmeter is very useful in monitoring of out-patients as well as those in emergency departments because of its convenience and simplicity with low cost. There have been many studies aimed at determining the accuracy and reproducibility of the peak flow meter in normal population. However, there is a paucity of reports regarding its accuracy in patients with chronic obstructive pulmonary disease(COPD) or asthma. The accuracy of the peak expiratory flow(PEF) measured with a mini-Wright peak flowmeter was assessed by a comparison with the results of a mass flow sensor. Methods : The PEF measurements were performed in 108 patients aged 19-82 years presenting with either a chronic obstructive lung disease or asthma before and after inhaling salbutamol. The PEF measurements from the mini-Wright flowmeter were compared with those obtained by the calibrated mass flow sensor. Results : The average of the readings taken by the mini-Wright meter were 37-39 l/min higher than those taken by the mass flow sensor. The average percentage error of the mini-Wright meter were higher, ranging less than 300 l/min. The mean of the differences between the values obtained using both instruments (the bias)$\pm$limits of agreement(${\pm}2$ SD) were $37.1{\pm}90\;l/min$ for the PEF(p<0.001). Conclusions : The mini-Wright peak flowmeter overestimated the flows in patients with COPD or asthma. It was also found that the accuracy of the mini-Wright peak flowmeter decreased in its mid to low range. The limits of agreement are wide and the difference between the two instruments is significant. Therefore, the measurements made between the two types of machines in patients with asthma or COPD cannot be used interchangeably.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.96-102
• /
• 2022

The present study investigated effects of microbial additives and silo density on chemical compositions, fermentation indices, and aerobic stability of whole crop rice (WCR) silage. The WCR ("Youngwoo") was harvested at 49.7% dry matter (DM), and ensiled into 500 kg bale silo with two different compaction pressures at 430 kgf (kilogram-force)/cm² (LOW) and 760 kgf/cm² (HIGH) densities. All WCR forage were applied distilled water (CON) or mixed inoculants (Lactobacillus brevis 5M2 and Lactobacillus buchneri 6M1) with 1:1 ratio at 1x105 colony forming unit/g (INO). The concentrations of DM, crude protein, ether extract, crude ash, neutral detergent fiber, and acid detergent fiber of whole crop rice before ensiling were 49.7, 9.59, 2.85, 6.74, 39.7, and 21.9%, respectively. Microbial additives and silo density did not affect the chemical compositions of WCR silage (p>0.05). The INO silages had lower lactate (p<0.001), but higher propionate (p<0.001). The LOW silages had higher lactate (p=0.004). The INO silages had higher yeast count (p<0.001) and aerobic stability (p<0.001). However, microbial counts and aerobic stability were not affected by silo density. Therefore, this study concluded that fermentation quality of WCR silage improved by microbial additives, but no effects by silo density.