• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.107-112
• /
• 2018

Shielding effectiveness (SE) improvement with EMI shield layers fabricated by conformal spray coating system was studied. Silver or Nickel powder filled acrylic resin were sprayed on the samples. We compared the performance with the viscosity of 400 cPs and 100 cPs cases. The thickness range of the coating layer was 20 to 50 um for the silver, 60 to 120 um for the nickel. The shielding effectiveness was measured by ASTM D4935 using coaxial type TEM-cell. The silver-filled resin showed much better performance than that of the nickel-filled resin. The shielding effectiveness increased almost proportional to the thickness of the coating layers until being saturated around 63 dB for the silver-layer or around 34 dB for the nickel-layer. The best performance measured in this study was the shielding effectiveness of 63 dB with $35{\mu}m-thick$ of silver-layer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.559-572
• /
• 2019

In the southeast sea of Korea, the cold water is concentrated in every summer, showing in abnormal oceanic conditions. Cold water occurred in the southeast sea is dominantly influenced by wind, which occurs when the south wind is continuously blowing for 3 to 7 days more. In this study, water temperature, wind speed and direction data of KMA, KHOA and KHNP, Chlorophyll-a of COMS/GOCI, GHRSST Level 4 SST of NASA, and red tide alert data of the National Institute of Fisheries Science were used to analyze the correlation between occurrence and change of the cold water and the red tide of Cochlodinium polykrikoides. The upwelling cold water mass showed a characteristic of moving northward along the current and occurrence a high concentration of chlorophyll along the water mass. Also, when the warm current were strong, the characteristic of red tide showed a northward moving.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.121-125
• /
• 2023

Casein is a milk protein and one of the most important nutrients in milk. The composition is over 80% in cow's milk and about 20~45% in human's milk. Casein is highly biocompatible and biodegradable, so it has been studied for various biomedical materials applications as well as drug delivery systems. It is widely known that casein can be prepared as nanoparticles in the presence of the Ca²⁺ metal ion. Because casein is amphiphilic, hydrophobic drugs could be loaded inside to form a protein-based drug delivery system. In this study, we studied the optimum conditions for casein nanoparticle formation using natural metal ions present in the body, such as calcium, magnesium, zinc, and iron. It was confirmed that nanoparticles have a uniform size of around 150 nm and negative zeta potential values. In addition, it was demonstrated that casein nanoparticles have a cell viability of more than 80% and efficient intracellular uptake properties using confocal microscopy. From the results, it was also shown that the casein nanoparticles prepared using various metal ions have the potential to be biocompatible drug delivery carriers.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.764-769
• /
• 2010

We investigated influence of continious application of gypsum (G: $CaSO_4{\cdot}2H_2O$), popped rice hulls (H) and zeolite (Z) on soil aggregation of reclaimed sandy loam soils. The application rates amended to fine sandy loam from reclaimed soils at Kyehwado were varied as follows:1550 (G1), 3100 (G2), 6200 (G3), 1000 (H1), 2000 (H2), 3000 (H3), and 200 (HZ1), 400 (HZ2) and 800 (HZ3) added to 1500(H) kg $10a^{-1}$, respectively. Soil aggregates were analyzed for 60, 90 and 120 days after treatments (DAT). At 60 DAT, The amount of aggregate from soil samples treated with gypsum was slightly increased with G1 while the aggregation was decreased by 4.66% for G3 for soil aggregates than thar of control. The treatments of H or HZ were effective in soil aggregation. The effect of treatment was in the order of H > HZ > G. At 90 DAT, increasing amount of gypsum attributed to decrease in soil aggregates. Therefore, we could conclude that suitable amounts of gypsum for soil aggregation in fine sandy loam might be 1550 kg $10a^{-1}$ or less. H1 increased aggregation by 7% for aggregate size between 1.0 and 2.0 mm. HZ1 was most effective in aggregation by 52.78% among the treatments while H2 and HZ3 51.50% and 48.51% at 120 DAT, respectively. As a result, we found that the effect of the treatment for soil amendments was in order of H > HZ > G.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.86-100
• /
• 2004

계산을 통한 단백질 상호작용 예측 기법의 중요성이 제기되면서 많은 단백질 상호 작용 예측 기법이 제안되고 있다. 하지만 이러한 기법들이 일반 사용자가 손쉽게 사용할 수 있는 서비스 형태로 제공되고 있는 경우는 드물다. 본 논문에서는 현재까지 알려진 단백질 상호작용 예측 기법 중 예측 기법의 완성도가 높고 상대적으로 예측 정확도가 높은 것으로 알려진 도메인 조합 기반 단백질 상호 작용 예측 기법을 PreSPI(Prediction System for Protein Interaction)라는 서비스 시스템으로 설계하고 구현하였다. 구현된 시스템이 제공하는 기능은 크게 도메인 조합 기반 단백질 상호 작용 예측 기법을 서비스 형태로 만들어 제공하는 기능으로 입력 단백질 쌍에 대한 상호작용 예측이 중심이 된 핵심기능과, 핵심 기능으로부터 파생되는 기능인 부가 기능, 그리고 주어진 단백질에 대한 도메인 정보검색 기능과 같이 단백질 상호작용에 관하여 연구하는 연구자에게 도움이 되는 일반적인 기능으로 구성되어 있다. 계산을 통해 단백질 상호 작용을 예측하는 시스템은 대규모계산이 요구되는 경우가 많아 좋은 성능을 갖추는 것이 중요하다. 본 논문에서 구현된 PreSPI 시스템은 서비스에 따라 적절히 그 처리를 병렬화 함으로써 시스템의 성능 향상을 도모하였고, PreSPI 가 제공하는 기능을 웹 서비스 API 로 Deploy 하여 시스템의 개방성을 지원하고 있다. 또한 인터넷 환경에서 변화되는 단백질 상호 작용 및 도메인에 관한 정보를 유연하게 반영할 수 있도록 시스템을 계층 구조로 설계하였다. 본 논문에서는 PreSPI 가 제공하는 몇 가지 대표적인 서비스에 관하여 사용자 인터페이스를 중심으로 상술함으로써 초기 PreSPI 사용자가 PreSPI 가 제공하는 서비스를 이해하고 사용하는 데에도 도움이 되도록 하였다.있어서 자각증상, 타각소견(他覺所見)과 함께 이상(異常)은 확인되지 않았으며 부작용도 없었다. 이상의 결과로부터, ‘펩타이드 음료’는 경증고혈압 혹은 경계역고혈압자(境界域高血壓者)의 혈압을, 자각증상 및 혈액${\cdot}$뇨검사에도 전혀 영향을 미치지 않고 저하시킨다고 결론지었다.이병엽을 염색하여 흰가루 병균의 균사생장과 포자형성 등을 관찰한 결과 균사가 용균되는 것을 볼 수 있었으며, 균사의 용균정도와 분생포자형성 억제 정도는 병 방제효과와 일치하는 경향을 보였다.을 의미한다. IV형은 가장 후기에 포획된 유체포유물이며, 광산 주변에 분포하는 석회암체 등의 변성퇴적암류로부터 $CO_{2}$ 성분과 다양한 성분의 유체가 공급되어 생성된 것으로 여겨진다. 정동이 발달하고 있지 않으며, 백운모를 함유하고 있는 대유페그마타이트는 변성작용에 의한 부분용융에 의해 형성된 멜트에서 결정화되었으며, 상당히 높은 압력의 환경에서 대유페그마타이트의 결정화작용 과정에서 용리한 유체의 성분이 전기석에 포획되어 있다. 이때 용리된 유체는 다양한 성분을 지니고 있었으며, 매우 낮은 공융온도와 다양한 딸결정은 포유물 내에 NaCl, KCl 이외에 적어도 $CaCl_{2},\;MgCl_{2}$와 같은 성분을 포함하고 있음을 지시한다. 유체의 용리는 적어도 $2.7{\sim}5.3$ kbar 이상의 압력과 $230{\sim}328^{\circ}C$ 이상의 온도에서 시작되었다.없었다. 결론적으로 일부 한방제와 생약제제는 육계에서 항생제를 대체하여 사용이 가능하며 특히 혈액의 성분에 유의한 영향을 미치는 것으로 사료된다. 실증연구가 필요할 것으로 사료된다.trip과 Sof-Lex disc로 얻어진 표면은 레진전색제의 사용으로 표면조도의 개선

• Clinical and Experimental Pediatrics
• /
• v.53 no.1
• /
• pp.106-110
• /
• 2010

Hippocampal sclerosis (HS) is one of the most common features of intractable temporal lobe epilepsy. Generally it can be identified through brain magnetic resonance imaging (MRI) with high degree of sensitivity and specificity. Typical brain MRI findings of HS are hippocampal atrophy with hyperintense signal confined to the lesion. On the other hand cortical dysplasia exhibits blurring of the gray-white matter junction and abnormal white matter signal intensity. We present a case where preoperative brain MRI strongly suggested the presence of diffuse cortical dysplasia in the left temporal lobe but postoperative pathology revealed the temporal lesion to be unremarkable except for hippocampal sclerosis.

• Journal of Korean Society of Forest Science
• /
• v.6 no.1
• /
• pp.19-23
• /
• 1967

The fungus which belongs to Alternaria has been isolated from "damping-off" infected seedlings of pitch pine (Pinus rigida Mill.) in the nursery (seed bed) of Chung Puk College, Cheong-Ju. The author has carried out this study regarding to (1) the effects of H-ion concentration on the growth of fungus, (2) the effects of temperature and humidity on the conidia germination, (3) the effects of temperature and humidity on the conidia formation. The summary of obtained in this experiments is as follows: 1. The suitable H-ion concentration for growth of isolated fungus is in the range of PH 4.0-9.5, the most suitable of it is PH 6.5-8.0. 2. The germination of the conidia is suppressed at below $0^{\circ}C$ or at $40^{\circ}C$ and above, the range of optimum temperature for the germination is $5^{\circ}C-35^{\circ}C$, the percentage of germination is highest at $20^{\circ}C$. And under relative humidities of 10% or below, the germination is suppressed, favorable relative humidities $85%{\cdots}100%$. 3. The formation of the conidia is suppressed at below $10^{\circ}C$ or at $34^{\circ}C$ and above, the favorable condition of the condia formation is as follows; Temperature; $22^{\circ}C-28^{\circ}C$ Relative humidity:85%-100%.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.317-322
• /
• 1999

Dens invaginatus is a developmental anomaly resulting from an invagination of the enamel organ. The incidence is highest with maxillary permanent lateral incisors. The reported occurrence ranges from 0.04 to 10%. This anomaly may involve the pulp and periapical tissues and cause pulpal inflammation, loss of vitality, apical and lateral periodontitis, periapical abscesses and cysts and stimulate internal resorption. Oehlers describes dens invaginatus as occurrence in three forms. In treating type 3 invaginatus, treatment strategy can be determined by considering the complexity and accessibility of invagination. In this case, showing simple invagination, it could be treated by simple endodontic treament confining to invagination without loss of vitality of tooth. After treatment of the present case, the results were as follows: 1. In type 3 dens invagiantus, if the tooth is vital and there is no evidence of communicating between invagination and pulp, we can save the vitality of the tooth and resolve the lesion by endodontic treament confining to the invagination. 2. In the invagination with opened apex, the closure of apex can be induced by apexification procedure doing this, we can avoid the neccessity of surgical intervention.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.1
• /
• pp.47-53
• /
• 2014

Dentin dysplasia is a rare hereditary disturbance characterized by a dental anomaly of the dentin layer. The etiology is unclear, and this rare hereditary disturbance affects approximately one person in every 100,000. Dentin dysplasia is classified into two types, radicular dentin dysplasia as type I and coronal dentin dysplasia as type II. The characteristic clinical findings of dentin dysplasia type I are normal appearance of the crown and hypermobility of teeth. The radiographic findings are obliteration of all pulp canals, short, blunted and malformed or absent roots. Dentin dysplasia type II as coronal dentin dysplasia shows similar clinical features with dentinogensis imperfecta. This report shows a case of dentin dysplasia type I affecting one family except the father. The clinical, radiographic and histopathologic findings of this family are presented. Dentin dysplasia type I is difficult to diagnose unless dentist performs radiographic examination. If the affecting patient does not get regular dental care, dental abscesses or cysts may form spontaneously without caries. In this regard, early diagnosis is important to prevent premature loss of dentition.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.255-262
• /
• 1997

Titanium nitride (TiN) films were prepared by reactive sputter deposition in mixed gas of Ar+$N_2$. The volume percentage of $N_2$ in the working gas was chosen so as to grow stoichiometric TiN films and the substrate temperature during film growth was set from room temperature to $700^{\circ}C$. Stoichiometric $Ti_{0.5}N){0.5}$ films with (111) texture were grown at temperatures over $600^{\circ}C$, while films prepared at temperatures below $600^{\circ}C$ showed N-rich TiN. The composition X and y in the $Ti_xN_y$ films determined by XPS and RBS varied within 5% with the substrate temperature. The sheet resistance of the TiN films decreases as the substrate temperature increased. TiN film prepared at $600^{\circ}C$ showed 14.5$\Omega\Box$, and it decreased to 8.9$\Omega\Box$ after the sample was annealed at $700^{\circ}C$, 30 sec in Ar-gas ambient by RTA. By far, high quality stoichiometric TiN films by reactive sputtering in the mixed gas ambient could be prepared at substrate temperature over $600^{\circ}C$.