• Proceedings of the CALSEC Conference
• /
• 2001.02a
• /
• pp.97-106
• /
• 2001

무기체계 연구개발 관련 각종 기술 자료들을 유관 부서의 지역적 분산이나 컴퓨터 시스템의 상이함에 상관없이 상호 교환 및 공유를 위한 분산 무기체계별 통합 데이터관리 체계, 설계/형상정보관리를 위한 응용체계 일부 계약자정보관리체계의 개발(중략)

• IE interfaces
• /
• v.8 no.3
• /
• pp.203-212
• /
• 1995

가공시스템이 무인화, 지능화됨에 따라 가공품의 품질향상을 위해 공구관리의 필요성이 증개되고 있다. 본 연구에서는 전자결합소자를 이용한 공구식별장치를 사용하여 공구정보의 신뢰성 향상, 공작기계의 가공정보관리, 공구형상관리를 할 수 있는 공구관리시스템을 개발했으며 개발된 시스템을 Shop Floor Control System과 연계하였다. 공작기계 및 공구프리셋터는 RS-232C 및 FANUC 프로토콜을 사용하여 인터페이스 되어 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11c
• /
• pp.2035-2038
• /
• 2002

코드기반 재사용이 가능한 객체기반 프로그래밍(OOP : Object-Oriented Programming)의 문제점으로 인하여 높은 재사용성(Reuse)을 가진 컴포넌트 기반 소프트웨어(CBD : Component Based Development)의 개발에 관한 연구가 활발히 진행 중이며, 이미 개발된 컴포넌트들을 통합적으로 관리하는 저장소 (Repository)에 관한 연구도 이루어지고 있다. 그러나, 기존에 설계된 저장소는 형상관리(Configuration Management)중인 컴포넌트에 대한 관리가 미흡하다. 따라서, 본 논문에서는 형상관리중이 컴포넌트의 버전을 지속적으로 감시하는 업데이트 엔진을 설계하고, 형상관리 컴포넌트들을 어떻게 효율적으로 관리 할 것인가에 대한 방법을 제시한다.

• Journal of Digital Contents Society
• /
• v.10 no.1
• /
• pp.147-157
• /
• 2009

Configuration and data management system to support processes for the weapon system should support the concurrent engineering and collaborative activities for various documents, drawings, part informations and structural informations, etc. which are produced through R&D processes for a long time. This thesis attempts to identify major functions in the configuration and data management system to support processes for the weapon system R&D into services based on a service oriented architecture. In order to identify major services in the configuration and data management system to support processes for the weapon system R&D, a configuration and data management system to support processes for the weapon system R&D was proposed with a service oriented architecture with four layers including a service consumer layer, a business service layer, an application service layer and a application layer, and major services were identified for each layer. In order to identify major services in four layers, this thesis adopted a bottom-up approach to identify the necessary business services from a well-defined domain implementation system rather than a top-down identification method in general. This thesis tried to identify the essential services in implementing the configuration and data management system to support processes for the weapon system R&D as a system based on the service oriented architecture using such a bottom-up service identification method while limiting those services to the general PDM system aspects and the business areas of the configuration and data management system to support processes for the weapon system R&D.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1153-1155
• /
• 2017

The Launch Vehicle is made up of one system with several parts gathered together. In order to make the various parts developed in various organizations into one system, it is necessary to confirm all designs at certain point in time. Change after the design fix require controlled process to analyze the impact of the changes, to decide whether or not to make the change, and to verify that the change was implemented as intended. The configuration management procedure implemented in the above manner is also applied to the development process of KSLV-II. The CAD tool and PLM are linked with each other to perform configuration management for the 3D model, 2D drawing, and the configuration identification document.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5A
• /
• pp.255-266
• /
• 2012

Main cable of a suspension bridge is the important member which shows the overall structure integrity at bridge completion. Configuration of main cable is a free hanging state at cable erection completion and is different from that at bridge completion supporting the dead loads such as hanger, girder, and so on. Accordingly, the configuration control under cable erection is considerably significant because the configuration at cable erection completion has direct influence on that at bridge completion. That is performed by sag adjustments at center, side span and tension adjustments at anchor span. The former needs the sag sensitivity which represents the control quantity of strand length corresponding to that of sag. The latter requires the tension sensitivity which shows the change of strand tension according to that of strand temperature. In this study, the fundamental equations of cable were derived with the assumption of either catenary or parabola shape, the differential-related equations using chain rule on horizontal tension were drawn from those and finally the estimation methods of the sag / tension sensitivity were proposed from both those. The nonlinear numerical analysis flow charts of sag sensitivity based on the catenary equations were proposed and the sag sensitivities grounded on the differential-related equations were compared with the results using them for various parameters of sag change. Also, considering the combinations of sag change parameters, the calculation method of the final variation for the cable sag was suggested. For the real suspension bridge under construction with PPWS method, the sag/tension sensitivity were estimated considering the construction conditions like the change of PPWS length, PPWS temperature, bridge span, etc.. We hope that this study will be a systematic guideline for the configuration control under main cable erection and improved highly by field verification in the real bridge site.

• ICROS
• /
• v.3 no.1
• /
• pp.60-65
• /
• 1997

본 고에서는 생산정보 처리 기술 중에서, 컴퓨터 이용설계와 공정설계(CAPP) 분야에서의 생산정보 통합 활용에 필요한 특징형상과 부품 관련 생산정보 통합 활용에 필요한 데이터베이스 설계라는 두 가지 경우에 국한하여 생산정보를 통합 활용하려는 연구 결과를 정리한다. 즉 밀링 가공 공정을 대상으로 "지적 공정설계 기술 개발" 과제를 통해 얻은 50개의 특징형상과, "S사 금형공장 생산관리 시스템 개발" 과제를 통해 얻은 데이터베이스 설계 방법이 정리되어 있지 않고 CAD/CAPP 통합 및 생산관리 시스템 구축이라는 일부 예에 불과하나, 새로운 연구 분야인 생산정보 통합 기술의 정립에 도움이 되기를 기대한다.술의 정립에 도움이 되기를 기대한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.89-96
• /
• 2023

In this study, the displacement dependence, strength, and energy dissipation capacity of the steel rod damper were evaluated. The test variables were cross-sectional shape and aspect ratio. The 6th test specimens were made for performance test. From the test results, it was evaluated that the displacement dependence conditions of design code were satisfied in all specimens. And the strength effect according to the cross-sectional shape was minimal. As a result, the strength and energy dissipation capacity of the aspect ratio of 13.7 were evaluated as excellent.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.3
• /
• pp.35-43
• /
• 2012

Medium size rotorcraft consist of approximately 5,000 key components. The components must satisfy the target weight and performance requirement through optimization. Therefore a rotorcraft component has approximately 100 times higher unit cost for mass production than the equivalent of an automobile's, along with huge development cost. Configuration management consists of four main parts : configuration identification, configuration control, configuration audit, and data management. In development programme, configuration management is one of the methods to save development cost, and setting a well-structured configuration management system according to the Military Standard is an important factor in success of the programme. The paper proposes a configuration management system suitable for development of various multi-use components development and presents that the configuration management was performed successfully during dual-use component development programme using the established system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.1005-1008
• /
• 2010

산출물들의 논리적 결합은 소프트웨어의 다양한 유지보수 활동에서 유용하게 활용될 수 있다. 버전 이력은 과거의 변경을 분석하여 산출물들간의 논리적 결합을 판단하는데 사용된다. 본 논문은 한 형상항목에 포함된 산출물들의 버전 링크를 구성함으로써 논리적 결합을 찾아내고, 이를 통해 과거의 변경에 대한 추적성과 향후의 변경에 대한 기준을 제공할 수 있도록 하였다. 형상관리 시스템과 개인 작업환경을 통합함으로써 산출물들간 버전 링크를 구성하고 논리적 결합을 식별할 수 있도록 하였다.